Dismantling of existing CGI Shed structure of operators for housing of new Hot Water Generator Boiler of capacity 6 lac kcal/hr along with various allied civil works at Govt Bone and Joint Hospital Srinagar.

Amount

DISMANTLING Dismantling/Demolition of whole existing CGI shed by way of Manual / mechanical (Hydraulic Exacavator). The job includes engaging of two labours for dismantling and shifting of scraps so retrieved after dismantling to the dumping site identified by the medical authorities. The job further includes dismantling of brick masonary wall of boiler house to shift the new boiler to its new place as directed by Engineer in charge at site. The job also includes providing of all necessary tools tackles and consumables required for carying out of dismantling work

Brick work for fixing of roller shutter performed in cement mortar 1:6 (Icement: 6course sand)

SITE CLEANING: Site Clearance by way of removing of all kind debris, waste items, jetsam, wreckage spoilage etc laying in and out of boiler house The job also includes necessary all kinds of consumable for carrying out of such jobs.

SHIFTING OLD BOILER 6LacKcal/Hr: Disconnecting of all electrical water pipeline connections of hot water Generator (Thermax 6lac kcal/hr) Boiler No 01 and thus removing of foundation bolts with the help of necessary tool and tackle The Job includes dismounting of the boiler from the foundation base by using suitable man power/hydraulic lift and crane to the suitable place The shifting of material is to be done in such a way that the operation of boilers should not get affected and besides no damage should occur during shifting. The job includes disassembling of feed water pump assembly and oil pump assembly by way of disconnecting all electrical and water/oil pipeline from the flange and shifting the same to the place identified by the medical authorities for further scrapping of the old boiler. The job includes providing of necessary tools, tackles and consumables for carrying out of such job

Supplying and fixing rolling shutters of approved make, made of required size MS lathes interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets,side guiders and arrangements for inside and outside locking with push and pull operation complete incl: the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-I and MS top cover of required thickness of rolling shutters. 80 x 0.9 mm MS lathes with 0.90 mm thick top cover

P/L in position cement concrete of specified grade of mix in 1: 1.5:3 mix incl: nominal size of stone aggregate 40 mm thick crushed including cost of centering and shultering for construction of foundation for housing new Boiler and water circulation pump of capacity 15 H.P.The job is Inclusive of all leads of carriages upto site of work.

M/s CAT VISION

MOHMMAD AMIN WANI

M/S AJAZ AHMAD KALLA