Repairs to sunken floors roofs joinery sanitary fittings plastering internal water supply and certain other misc works at EME Wksp Station HQ at GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any descriptions or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness below or above ground level etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of PGI /translucent sheets of any guage or any thickness etc complete all as specified and directed by Engineer-in-Charge.

Dismantling Asbestos cement (corrugated, Semicorrugated etc.) sheets in roof coverings etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of framed trusses not exceeding 10mtr span etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster of any thickness on brick/stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames not exc 1.50sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames exc 1.50sqm not exc 4.00sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description not exc 1 Sq. m each etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 (here-in-before) but exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc nexc 10Sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil and getting out etc complete all as specified and directed by Engineer-in-Charge.

M&L for moorum/red bajri filling in floors or pavings, laid in trenches n.exc. 15cm thick , speread , levelld and rammed including watering etc complete all as specified and directed by Engineer-in-Charge.

M & L for hard core of gauge n exc 63mm deposited spreading & levelling in layers n exc 15 cm thick watered & rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge.

M & L for PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floor 75mm thick etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for plain cement concrete in PCC 1:3:6 type C2 using 40 mm graded aggregates in foundation, filling and mass concrete for similar work etc complete all as specified and directed by Engineer-in-Charge.

M&L for Pre-cast cement concrete block Type C1 1:3:6 (20 mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete Set in cement and sand mortar (1:60 etc complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials (soil) exc 250m but n exc 500m and depositing where directed at a level n.exc 1.50m above the starting poing etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Vitrified ceramic tiles double charge/ultra charge,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE as in floor etc laid over and including screed bed 15mm thick in cement and sand mortar (1:6) set jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for joint free / rectified non skid ceramic coloured tiles slip shield series of somany or equivalent makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.12 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

Matrerial and labour for joint free/ rectfied ceramic coloured tiles VC shield series of somany or equivelent makes as specified in PS 8-10mm thick as approved by GE (square/reactangular) area of each tiles exc 0.20 sqm but not exc 0.38 sqm as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) and set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 22 (here-in-before) but as in skirting over and including 10mm thick back coat in cement and sand mortar (1:4)

Material and labour for chequred cement concrete tiles 25cm x25cm x 25mm thick set, jointed and pointed with grey cement and pigment and pointed in neat cement slurry as in floor over and including 15mm screedbed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine cut Kota stone slab 20 to 25mm thick (minimum size 30cm x 45cm) as in flooring, laid over and including cement screed bed 15mm thick in cement and sand mortar (1:6) and set and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and granite polishing etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 20mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over and including screed bed 15mm thick in cement and sand mortar (1:4) set in neat cement slurry, jointing & pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine cut cudappah stone slab, 20-25 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge.

Dismantling unfarmed timber scantlings 40 sqcm and over in section, in any position etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for second class hard-wood in scantlings clean sawn etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 31 (here-in-before) but pressed steel frames of size 125 mm X 60 mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for filling in door frames plain cement concrete, 1:2:4 type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge.

M & L 2nd class hardwood plain fillets square rectangular or triangular section clean sawn and fixed with nails or brads exc 13 and n.exc 25 Sqcm etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 38 (here-in-before) but 30 mm thick as in window or ventilators etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix steel windows with side hung double shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge. NOTES: 1) Guard bars shall be measured and paid separately as supply only. 2) M & L for galzing shall be measured and paid separately.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and directed by Engineer-in-Charge. NOTES: 1) Guard bars shall be measured and paid separately as supply only. 2) M & L for galzing shall be measured and paid separately.

Supply and fixing powder coated aluminium door shutters with frame in two panels made of section 47.5x44.45x2.25mm @1.12 kg/RM frame, vertical styles of section 47x44.5x2.75mm thick @ 1.15kg per RM, top rail & lock rail of section 47.5x44.5x2.75mm @ 1.33 kg per RM, bottom rail made of section 114.6x44.45x2.3mm@ 2.06 kg per RM with securing rebate @ 0.102 kg per RM with & incl 5mm thick plain sheet glass incl necessary screw, jointing cleats, glazing clip, rubber packing, aluminium snap beeding etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix power coated aluminium three track window made out of Jindal aluminium sections Nos. 20671, 20672, 20690 & 20668 including 5mm thick plain sheet glass including rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge. Note : Aluminium frame for fixing three track windows shall be measured and paid separately.

Supply only mild steel square guard bars 10 mm welded to steel windows / ventilators etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel tower bolt stove enamelled black with bright bolt 200mm long etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel pressed handles oval type stove enamelled black of size 150mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 49 (here-in-before) but in repairs

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 51 (here-in-before) but in repairs

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 53 (here-in-before) but in repairs

Supply and fix aluminium die cast body door closure , hydraulically regulated of designation 2 , universal type for door shutters weighing between 36 to 60 Kg etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 55 (here-in-before) but in repairs

Supply and fix mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 57 (here-in-before) but in repairs

Supply and fix mild steel 20mm dia powder coated chromium plated curtain rods incl brackets etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

All as per item No. 60 (here-in-before) but fixed in repairs

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads or from metal frame including punching or drilling out old glazing pins/spring clips and supply and fix 3 mm thick ordinary quality plain sheet glass with oil putty in squares not exc 0.50 Sq m in each pane etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 62 (here-in-before) but, frosted glass 3mm thick glazing with oil putty in squares exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3.00 mm thick ordinary quality plain sheet glass with oil putty in squares n exc 0.50 Sq m in each pane etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 64 (here-in-before) but, frosted glass 3mm thick glazing with oil putty in squares n exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old/new steel/steel ornamental and iron surfaces of any description exceeding 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primeretc complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls or other plastered surfaces and preparing the surfaces and applying two coats of OBD (washable) over a layer of wall putty at any height etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old plastered surfaces and applying one coat of OBD (washable) at any height etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old plastered complete and applying two coat of Cement Paint at any height etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old plastered complete and applying one coat of Cement Paint at any height etc complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing for 15mm dia bore etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 72 (here-in-before) but, 20 mm dia bore etc.

S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings.etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 74 (here-in-before) but 20mm outer dia etc

Supply and fix in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc completed all as specified and directed by Engineer-in-Charge.. Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equvalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs PVC bib tap 15 mm dia, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1320(Orintal series) of MARC or equvalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc coplete all as specified and directed by Engineer-in-Charge . Make:- Cat part No MOR 1010(Orintal series) of MARC or equvalent makes mentioned in list of makes in Appendix `C'

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, etc complete all as specified and directed by Engineer-in-Charge.. Make :- Sleek essence series Of Hindware or Cat part No E8303 of Parryware or equvalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge.. Make :- Cat Part No C0117 of Parryware or Cat Part No 20042 Of Hindware or equvalent makes mentioned in list of makes in Appendix `C'

Supply and fixed in repairs 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 83 (here-in-before) but 75 mm dia

Supply and fix in repairs 110 mm bore PVC (SWR) bend, any radius etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 85 (here-in-before) but 75 mm bore.

Supply and fix in repairs 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 87 (here-in-before) but 75 mm bore.

Supply and fix in repairs 110 mm bore PVC (SWR) branch piece double (double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 89 (here-in-before) but 75 mm bore.

Supply and fix repairs PVC (SWR) floor trap, 75 mm dia with grating including jointing with slovent cement etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per item No 92 (here-in-before) but water storage tank of capacity 1000 litres

All as per item No 92 (here-in-before) but water storage tank of capacity 2000 litres

Supply and fix in repair ball brass valves, 15 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 95 (here-in-before) but 20 mm dia bore.

All as per item No 95 (here-in-before) but 25 mm dia bore.

Supply and fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand etc complete all as specified and directed by Engineer-in-Charge.. Make :- Cat Part No C0471 (CHT) Indus series Of Parryware or equivalent inmakes mentioned in list of makes in Appendix `C'

Supply and fix in repairs looking mirror of size 600 mm X450 mm etc complete all as specified and directed by Engineer-in-Charge.. Make:- Cat part No C 8610 Of Parryware or equivalent inmakes mentioned in list of makes in Appendix `C'

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent inmakes mentioned in list of makes in Appendix `C'

Supply and fix in repairs plastic waster closet seat cover, colored closed patern with flat bottom. cover and mild steel cromium plated or alumlised hinging device etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs framed work such as in doors or gates or fencing of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other coverings, doors etc to be prepared for handing or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S&F of rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 (Gde-E- 250) quality-A or equivalent inmakes mentioned in list of makes in Appendix `C'

Material and labour for rendering 10 mm thick in cement and sand mortar (1:4) on stone masonry surface finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in cement and sand mortar (1:6) on brick or concrete surface finishing even and smooth without extra cement etc complete all as specified and directed by Engineer-in-Charge.

Material and labour in repairs for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification etc complete all as specified and directed by Engineer-in-Charge.

M & L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and directed by Engineer-in-Charge.

S&F Asbestos cement two piece adjustable serrated ridge for corrugated or semi-corrugated sheets fixed with L- ype or J-type hook bolts etc complete all as speified and directed by Engineer-in-Charge

M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE

M&L for pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE etc complete all as specified and directed by Engineer-in-Charge

M&L stone sett flooring with stone seets of size 200 to 250mm long 150 to 200mm wide and 150mm deep and sides dresses bedded in cement and sand mortar (1:3 )joints 20mm thick grouted in cement and sand mortar (1:20 with admixture of matalic floor floor 5% by weight of cement struck flush etc complete all as specfied and directed by Enigneer-in-Charge

M&L edge stones to flooring with stone setts of size 250 to 300mm long 150 to 200mm wide and 450mm deep etc complete all as specified and directed by Engineer-in-Charge.

An amount of Rs 74,977.00.00 shall be deducted from BOQ on account of schedule of credit

Neha Enterprises

M/S MAHESHWARI ENTERPRISES

M/s Meher Construction

M/S. M. F. Sharif & Co.

MS. A.S. CONSTRUCTION

OM SAI ASSOCIATES

M/s.D.K.ALKUTE