ADDN/ALTN TO ROOF SHEET, FLOORING CUM PATH IN BLDG NO P-01 MG ENCLAVE AT HALDI GHATI LINE AND P-02 HALDI GHATI LINE AT MIL STN JAIPUR UNDER GE (SOUTH ) JAIPUR

Amount

Excavating in post holes (or similar holes) each n.exc 0.50 cum, watering, and removing surplus soil to a dist n.exc 50 m and making good surface in soft/ loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Gusset Plate or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices, angle brackets (Fe 410W (Gde E-250) Quality A) complete all as specified and directed.

S&F structural Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and directed.

M&L for mild steel sheet 0.50mm thick mangalore tile pattern approved color as in roof covering in half curved surface fixed with self tapping screws complete all as specified and directed.

M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of approved shade with compressure machine, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, galvanised wire staples complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and directed.

S&F for designer Vitrified tiles 10 to 12 mm thick of size 400x 400 mm in floors etc set and jointed in neat cement slurry and pointed in white cement with using pigment to match color of tile over 15mm thick screed in CM(1:4) or approved adhesive complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 using old size bricks complete all as specified and directed.

M&L for hardcore gauge 40 to 80mm,deposited, spread ,and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Providing precast cement concrete louvers and garden jallies, 25 mm thick type B-0 (12.5 mm crushed stone agggate ) set in CM 1:4 (measured solid), including all mouldings but excluding frame complete all as specified and directed.

S&F 25mm dia stainless steel dark wood finish conduit of required length for curtain rods and decorative knobs at each end, wall to wall and brackets as specified, fixed in truss complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Plain mild steel sheet 0.80 mm thick as in roof covering with grade of zinc coating 275 fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

M&L for designer rubber moulded Chequered cement concrete tiles 30cmx30cmx 25mm thick , set , jointed and pointed in neat cement slurry in floor with grey cement and pigment to match over 15mm thick screed in CM(1:4) complete all as specified and directed.

Demolition of PCC in ground floors above and pavings n exc 15 CM thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the requred line,level and curvature, jointed to the requred line,level and curvature, jointed with cement mortar 1:3 (1 cement 3 coarse sand), including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm ), including making drainage opening opening wherever required complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for Point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green) drawn into and incl. concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked invory colour with all conduit fittings connected accessories and terminated in modular PVC flush boxes with modular white cover plate with frame for mounting fitting like switches, sockets fan regulators as required for one light point controoled by one switch complete all as specified and directed. (a) One light/fan point controlled by one, one way switch with cables 1.5 sqmm size.

Description all as per item No 23.00 above but One 3 pin 5 Amp socket outlet on same board with cables 1.5 sqmm size complete all as specified and directed.

Description all as per item No 23.00 above but with 2.5 Sqmm copper cable for 3 pin 15/20 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed.

S & F Modular switch 1 way , one module, 6 Amp rating , 230/250 volts complete all as specified and directed.

S & F Modular switch 1 way , one module, 16 Amp rating , 230/250 volts complete all as specified and directed.

S & F Modular socket 2 way , 6A - 2/3 pin combined 2 module 230/250 volts complete all as specified and directed.

S & F Modular socket 2 way , 6A/16A - 2/3 pin combined 2 module 230/250 volts complete all as specified and directed.

S & F Modular White cover plate with frame, 1 module complete all as specified and directed.

S & F Modular White cover plate with frame, 3 module complete all as specified and directed.

S & F Modular White cover plate with frame, 8 module complete all as specified and directed.

S & F PVC blanking plate one module complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply & fixing in repair nucleus recessed mounting adjustable COB LED downlight made of aluminium fins and high-lumen LED a light source with clear diffuser and separate electronic driver complete adjusted as per requirement including fixing with clamps ,connecting complete all as specified and directed.

S&F in repair factory made, sheet distribution boards, SPN 8 ways, double door,240 V, protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps rated copper bus bar complete all as specified and directed.

S&F in repair MCB SP 5 to 32 Amps 10 KA 'C' curve rupturing capacity, 240 V confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

S&F in repair MCB SPN 40 Amps 10 KA 'C' curve rupturing capacity, 240 V confirming to IS-8828 : 1996, IEC-898 : 1995 complete all as specified and directed.

M & L in replacement of sub main wiring with two single core 6.0 Sqmm PVC insulated FR-LSH unsheathed cable multi-stranded copper conductor drawn through and including PVC conduit 25 mm medium grade concealed with all fittings ISI marked and fixing accessories on roof, walls, ceiling etc. including 6.0 Sqmm PVC insulated unsheathed one core multistranded copper conductor earth wire complete all as specified and directed.. (Note: Two run of 6 sqmm and one run of 6 sqmm earth wire including PVC conduit shall be measured & paid as one length)

M&L in repair for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth wire of 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and directed. (Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Schedule of Credit

M/S ROHIT CONSTRUCTION (BID ID -3343844)