Certain repair to E/M Installation and repair to certain portion of fencing path and misc works under AGE B/R-II at Tibri Mil Stn, Gurdaspur.

Amount

S&F machine cut Kota stone slab flooring 20-25mm thick over and including cement screed bedding 20mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing (with bees wax polish) including demolition of existing complete all as specified and directed.

Material & labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement, no pigment & joints filled with sand including demolition of existing complete all as specified and directed.

Material and labour for plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base for raising level complete all as specified and directed

M&L coloured Chequered cement concrete tiles with grey cement and pigment , 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar 1:6 including demolition of existing complete all as specified and directed.

Material & lobour for 25 mm Sand filling under floors or in foundations including watering and consolidation all as specified & directed.

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) all as specified.

S&F Roof trusses (framed), trussed, purlin, crane gentries,rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section, including distance pieces ,cleats etc all as spc.Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition structural steel work including doors, gates, chowkats, framed truss and rolling shutters etc. complete all as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

M&L for preparation of new steel surfaces exc 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F framed work as in gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290. Gde-E-165.

S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including one shop coat of red oxide primer and two coats of synthetic enamel paint and taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, shall be measured and paid for separately

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 14 above but size of opening exceeding 1.5 Sqm but not exceeding 4 Sqm each.

S&F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels on both sides complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary lugs, hinges, lock strike plate and filling of chowkats, hold fast blocks with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with shop coat of red oxide primer after prepration of surfaces complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putting in squares n.exc 0.50 Sqm each complete all as specifiwd and directed.

S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putting in squares n.exc 0.50 Sqm each including hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed.

S&F Aluminium anodized barrel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed.

S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed.

S&F Aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L 15mm thick cement plastering in CM 1:6 on other than fair faces of brick or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L 15mm thick cement plastering in CM 1:6 on fair faces of brick or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L 15mm thick cement plastering in CM 1:4 on fair faces of brick or concrete surfaces, finished the surfaces even and fair, Complete all as specified & directed.

Preparation of new plastered surfaces and applying two coats of oil bound distemper (of approved shade) on walls over a coat of primer complete all as specified and directed.

M&L preparation of new plaster surface and applying two coats of cement base paint all as specified and directed.

Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L for brick work with flyash bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

All as per Srl item No 32 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 31 shall be reused after necessary cleaning of mortar).

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair, laid in alternate bays not exceeding 3.0m in length, joints filled with bituminous mastic filling comprising 1 part of heated hot blown bitumen 85/25 and 3 parts of heated sand complete all as specified and as directed.

S&F steel rolling shutters with ball bearings as specified including top cover, anchoring rod, hasp and staple including one shop coat of red oxide primer and two coats of synthetic enamel paint, errected in position as indicated complete push pull or maunual type thickness of shutter laths in 1.25mm including necessary fittings complete all as specified and directed.

M&L for Providing Pre-cast cement concrete type B1 (1:2:4) (20mm graded aggregates) for pre-cast cover for drain, in landing, cover slabs (for man holes etc) chajjas,water troughts set in CM (1:4) shelves and similar articles with plain faces complete all as specified and directed.

S&F 6 to 8 mm dia and over TMT bar cut to length bent to shaps including cranking binding spirraly, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 18/19 mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including taking down existing all as specified and directed.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with PVC trap, integral foot rest including connection to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 using 40mm graded stone aggregate complete all as specified and directed.

S&F in repair vitreous China wash basin, with full pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms) complete all as specified and directed.

S&F in repair vitreous China half stall type urinal, size 345x320x560mm, white, with brass CP spreader including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe, waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms) complete all as specified and as directed.

M&L for preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 and demolition of existing tile floor and screed complete all as specified and directed.

M&L for ceramic glazed dark shade coloured tiles of size 350x250x 7mm/ 450x350x7mm thick joint free over and including 10mm thick screed bed in CM(1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado and demolition of existing tile floor and screed complete all as specified and directed.

M& L for dark coloured vitrified tiles10 mm thick joint free (square/ rectangular) area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 and demolition of existing tile complete all as specified.

Roughening the surface of old concrete floor/brick tile picking sweeping clean and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqm.

M&L for cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate as in roof padding, finishing the surface even and smooth without using extra cement using water proofing compound as per manufacturer's instructions complete all as specified. (Note: Supply only of WPC shall be measured and paid separately).

M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 kg /Sqm after cleaning surface complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.6 kg per sqm complete all as specified and directed.

M&L for preparing new surface and applying two coats of aluminium paint over APP membrane complete all as specified and directed.

Supply only integral water proofing compound.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum, getting out, returing filling in and ramming earth or broken rubble mixed with earth arround, in layers not exceeding 25 cm watering and removing surplus soil to a distance n. exc 50m.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for plain cement concrete (1:5:10) type E-2 (using 40 mm graded stone aggregate) for foundation, filling and mass concrete complete all as specified and as directed.

S&F Mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and as directed

Material and labour for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) for post holes complete all as specified and as directed.

Material and labour for PCC type B1 1:2:4 (20 mm graded stone aggregates) as in coping/ band and bed block etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply only 3.15 mm dia PVC coated galvanized steel wire chain link fencing 75 mm x 75 mm mesh fixed with string bolts complete all as specified and directed.

Demolition chain link fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. Note :- Supply only of chain link fecncing and line wire will be measured and paid separately.

Supply only mild steel round bars 10 mm dia, Fe 290, Grade E-165, cut to length, bend to shape required and hooking ends for fixing to chain link fencing complete all as specified.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screw end to be fitted with washers and one hexagonal or square nut, diameter of bolts 16 mm, length of bolt exc. 5 not exc. 10 cm long, complete all as specified and as directed.

Returning, filling in soils including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated materials not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

Dismantling posts or struts (RCC) any section including taking out embedded portion and making good disturbed ground, embedded in natural ground, complete all as specified and directed.

All as per Srl item No. 66 above but embedded in concrete, brick work etc.

Material and labour for GI powder coated grid work of size 605mm X 605mm, with main tee of size 32mm X 23.5mm x 1.5mm thick, cross tee of size 25mm X 23.5mm x 1.28mm and angle of size 23.5mm X 23.5mm x 1.2mm fixed on wall, all powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm dia. G.I. suspension wires and 'J' bolts, washers, nuts spaced at 1200 mm both ways including making niches for fans/ light all as specified and as directed.

S&F in repair 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as spcd and directed.Dismantling timber scantlings, framed work, 40 sq. cm and over in section, in any position complete all as directed.

Demolition timber scantlings, framed work, 40 sq. cm and over in section, in any position complete all as directed.

Supply and fix galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pin etc. including taking down existing (each line wire to be measured) complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

M&L for adequate coat Painting on kerb stone lines , dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as spcd and directed

M&L for one coat Painting lines on old surface of kerb stones dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as spcd and directed

S&F in repair 75mm bore of pipe high density polythelye(HDPE) pipes of pressure rating 6 Kgs/Sqcm complete all asspecified and as directed.

A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

JOGRAJ CONSTRUCTION COMPANY

KAILASH CONSTRUCTION CO

talwinder singh and co

M/S GAGAN CONSTRUCTION CO

buta singh and sons