WBPWD/EE/PMED/NIQ-91/2024-25

Amount

Supply and delivery of 9 Mtr. HDG Octagonal Poles in 3 mm shaft thickness with inbuilt loop Box with locking arrangement consisting of 1 no apprpriate size 4 pole connector and 1 no SP MCB on 6 mm bakelite sheet , having Top A/F 70, Bottom A/F 155 , Base Plate 260x260x16 as per manufacture design to suitable for wind speed as per IS:875. A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR). B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 C)Galvanization as per BSEN ISO:1461 [Make:Transrail/Utkarsh/Bajaj/Valmont]

Supply and delivery of 3 mtr. HDG Tubular Pole having 76.1 mm at top dia, 89 mm dia in middle and 114.3 mm dia at bottom and with Base plate ( size 220 x 220 x 10 mm) and with in built loop box with locking arrangement railway type consisting of 1 no apprpriate size 4 pole connector and 1 no SP MCB on 6 mm bakelite sheet as per direction of EIC.[Make: Bajaj/Utkarsh/Calcutta pole). .

Erection of 9 mtr Octagonal pole on RCC foundation (0.6 X 0.6 X 1.70 mts), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.60 mts. above ground level including 3 mm thick neat cemented finish and filling up the excavated earth pit with shifted soil and ramming properly and 02 nos. 32 mm dia polythene pipe inside the center of the muffing for passing 02 nos. cable as per direction of EIC.

Erection of 3 mtr steel tubular pole on CC foundation (0.6 X 0.6 X 1.70 mts), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.60 mts. above ground level including 3 mm thick neat cemented finish and filling up the excavated earth pit with shifted soil and ramming properly and 02 nos. 32 mm dia polythene pipe inside the center of the muffing for passing 02 nos. cable as per direction of EIC.

Supply and fixing of 4 Nos. M24X 750 mm foundation bolt in pole foundation as per EN-8 Grade manufactured from stainless steel along with nuts, washers, and templates in muffing (during errection of muffing) as per direction of EIC.

Supply and fixing of 4 nos. M16 X 600 mm long foundation bolt in pole foundation as per from stainless steel along with nuts, washers and templates as per direction of EIC.

Supply and fixing of 0.6 mtr radius HDG circular bracket suitable for fixing 4 Nos. LED Fittings as per direction of EIC.

S & F of Decorative Ring Post top 40/45 W LED for 360° indirect light with (IP 65/66) made up of Aluminum Die Cast and Extruded Pipe with Powder Coating, with Frosted Diffused Flat PMMA sheet. fixture consist of Open & Short circuit protection, reverse polarity protection and surge protection 5KV Inbuilt. External 10KV SPD, CRI>70, THD<10%, PF>0.95, CCT 3000K, BIS approved, minimum system output 3600 lumen suitable for use with 230Volt, 50Hz.with necessary connection (Make: Philips/Wipro/Surya) as per direction of EIC. [5 years complete care warranty on this item]

Supply & delivery of 150 W LED floodlight made up of pressure die cast aluminium housing with toughened glass cover and SMD LEDs with IP66 protection, BIS approved sillicon filled potted driver for vibration proof, CRI> 70, CCT- 3000K, System efficacy≥100 LPW, 10KV SPD (Phillips/Wipro/Crompton) as per direction of EIC. [5 Years Warranty on this item]

Supplying of 1.1 KV Grade, 4 core 16 sq. mm XLPE Aluminium conductor, PVC sheathed, armoured cable conforming to IS 7098, of earthed system of following size. [ Make : Polycab / Havells / RR Kabel ]

Laying only 4 core 16 sq. mm Cable through existing RCC/Hume/ GI Pipe/HDPE Pipe/open masonary trench.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured 4 core 16 sqmmcables.

Finishing the end of 4 core 16 sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Inter connection of compound light fittings by 3 x1.5 Sq. mm. PVC insulated copper wire [ Make : Polycab / Havells / RR Kabel ] from loop box inside the pole to light fittings through pole & bracket with Pricision MMS PVC pipes as per direction of EIC.

Supply and delivery of following sizes 40 mm dia HDPE pipe.

Laying of HDPE pipe of the following sizes in underground trench 460 mm wide x 760 mm average depth, including filling the trench with shifted soil, leveling up and restoring surface duly rammed.

Earthing with 50 mm dia GI pipe (ISI-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.

GHOSH ELECTRIC (BID ID -6216022)

SILICON SOFTWARE (BID ID -6231816)

SAMARJIT ENTERPRISE (BID ID -6222809)

GHANASHYAM ELECTRIC STORES (BID ID -6224397)

BHUNIA ENTERPRISE (BID ID -6229435)