Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAdmitted-Finance | ₹1.3 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.3 CrAdmitted-Finance KHOITADIH PROJECT BILPAHARI BARDHAMAN BARDHAMAN 713378 WEST BENGAL INDIA | BARDHAMAN | BARDHAMAN | WEST BENGAL | 713378 | ₹1.3 Cr | L2 | Admitted-Finance |
| 3 | L3₹1.3 CrAdmitted-Finance PANDANESWAR BARDHAMAN BARDHAMAN 713346 WEST BENGAL INDIA | BARDHAMAN | BARDHAMAN | WEST BENGAL | 713346 | ₹1.3 Cr | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | BABLU SINHA L2 | SWAPAN KUMAR AKHULI L3 | M/s Anjali Construction L1 |
|---|---|---|---|---|---|---|
| 1.00New installation of 2x200KW, 1200mm belt conveyor with 930 mtr structure in 33 x cut in RV seam for LHCM . (Inclusive of EPF/CMPF) | ||||||
| 1.01 | Loading, unloading, carrying, transportation of 2x200 KW, 1200mm heavy duty drive head with Motor and starter from surface to mentioned belt conveyor - | 30 | MT | 24,094 ₹7.2 L | 24,660 ₹7.4 L | 23,807 ₹7.1 L |
| 1.02 | Loading, unloading, carrying, transportation of other structure assoiciated with Drive head including discharge unit, loop take assembly, tail end assembly and safety guard from surface to mentioned belt conveyor - | 22 | MT | 24,094 ₹5.3 L | 24,660 ₹5.4 L | 23,807 ₹5.2 L |
| 1.03 | Loading, unloading, carrying, transportation of 930 mtr structure at mentioned belt conveyor -@ 150.67kg per mtr | 140.12 | MT | 24,094 ₹33.8 L | 24,660 ₹34.6 L | 23,807 ₹33.4 L |
| 1.04 | Loading, unloading, carrying, transportation of belt from surface to belt install site then laying and lapping of belt | 1,860 | Meter | 392 ₹7.3 L | 401 ₹7.5 L | 387 ₹7.2 L |
| 1.05 | Loading, unloading, carrying, transportation of 01 nos of load table from surface to mentioned belt conveyor -1MT | 1 | MT | 24,094 ₹24,094 | 24,660 ₹24,660 | 23,807 ₹23,807 |
| 1.06 | Faencing of drive tail end etc including cost of DA,oxygen and welding electrodes | 1 | nos | 27,289 ₹27,289 | 27,930 ₹27,930 | 26,965 ₹26,965 |
| 1.07 | Fabrication of load table at surface workshop including cost of DA, Oxygen & welding elctrodes. | 1 | nos | 29,108 ₹29,108 | 29,792 ₹29,792 | 28,762 ₹28,762 |
| 1.08 | Fabrication and fitting of dischage and tail end scrapper | 1 | nos | 2,000 ₹2,000 | 2,047 ₹2,047 | 28,762 ₹28,762 |
| 1.09 | Loading, unloading transportation of control cable & assy laying and fitting | 1 | nos | 30,360 ₹30,360 | 31,073 ₹31,073 | 30,001 ₹30,001 |
Tender Value
₹1.5 Cr
EMD Value
₹1.9 L
Closing Date
23 Mar 2026, 6:00 pmClosed
Area Engineer(E and M)
Office of the General Manager Pandaveswar Area , P.O. Pandaveswar, Dist.-Paschim Bardhaman, West Bengal-713346
Installation of 04 nos of New 1200mm belt conveyor in RV seam for starting of LHCM in RV seam of Khottadih Colliery Panaveshwar Area
2026_ECL_355900_1
GM-PND/EandM/25-26/323/1760 dated 06/03/2026
Open Tender
Electrical and Maintenance Works
60 days
Khottadih Colliery
Please refer Tender documents.
5 documents required · 5 mandatory
₹1.9 L
26 Mar 2026
7 Mar 2026
24 Mar 2026
7 Mar 2026
23 Mar 2026
7 Mar 2026
7 Mar 2026 - 16 Mar 2026
New installation of 2x200KW, 1200mm belt conveyor with 930 mtr structure in 33 x cut in RV seam for LHCM . (Inclusive of EPF/CMPF)
Loading, unloading, carrying, transportation of 2x200 KW, 1200mm heavy duty drive head with Motor and starter from surface to mentioned belt conveyor -
Loading, unloading, carrying, transportation of other structure assoiciated with Drive head including discharge unit, loop take assembly, tail end assembly and safety guard from surface to mentioned belt conveyor -
Loading, unloading, carrying, transportation of 930 mtr structure at mentioned belt conveyor -@ 150.67kg per mtr
Loading, unloading, carrying, transportation of belt from surface to belt install site then laying and lapping of belt
Loading, unloading, carrying, transportation of 01 nos of load table from surface to mentioned belt conveyor -1MT
Faencing of drive tail end etc including cost of DA,oxygen and welding electrodes
Fabrication of load table at surface workshop including cost of DA, Oxygen & welding elctrodes.
Fabrication and fitting of dischage and tail end scrapper
Loading, unloading transportation of control cable & assy laying and fitting
Fabrication & fitting of veticle support for structure hanging portion from discharge to loop take up including coast of DA and 02 nos oxygen cylibnder
Transportation and placing electrical VCB , cable (power and control) from surface to drive head - 1 set
Holding down bolt for drive head
Tail end shifting
New installation of 2x150KW, 1200mm belt conveyor with 325 mtr structure in 8Dip first belt at RV seam for LHCM . (Inclusive of EPF/CMPF)
Loading, unloading, carrying, transportation of 2x150 KW, 1200mm heavy duty drive head with Motor and starter from surface to mentioned belt conveyor -
Loading, unloading, carrying, transportation of other structure assoiciated with Drive head including discharge unit, loop take assembly, tail end assembly and safety guard from surface to mentioned belt conveyor -
Loading, unloading, carrying, transportation of 325 mtr structure at mentioned belt conveyor -@ 146kg per mtr
Loading, unloading, carrying, transportation of belt from surface to belt install site then laying and lapping of belt
Loading, unloading, carrying, transportation of 01 nos of load table from surface to mentioned belt conveyor -1MT
Faencing of drive tail end etc including cost of DA,oxygen and welding electrodes
Fabrication of load table at surface workshop including cost of DA, Oxygen & welding elctrodes.
Fabrication and fitting of dischage and tail end scrapper
Loading, unloading transportation of control cable & assy laying and fitting
Fabrication & fitting of veticle support for structure hanging portion from discharge to loop take up including coast of DA and 02 nos oxygen cylibnder
Transportation and placing electrical VCB , cable (power and control) from surface to drive head - 1 set
Holding down bolt for drive head
tail end shifting
New installation of2x110KW, 225mtr, 1000mm belt conveyor in 8dip 3rd belt for LHCM In RV seam. (Inclusive of EPF/CMPF)
Loading, unloading, carrying, transportation of discharge unit with required girders from surface to mentioned belt conveyor -3MT
Loading, unloading, carrying, transportation of heavy duty drive head from surface to mentioned belt conveyor -10.5MT
Loading, unloading, carrying, transportation of tail end assuy along with V scapper tail end guard decking plate from surface to mentioned belt conveyor -1MT
Loading, unloading, carrying, transportation of 225 mtr structure at mentioned belt conveyor -@ 110 kg per mtr
Loading, unloading, carrying, transportation of belt from surface to belt install site then laying and lapping of belt
Loading, unloading, carrying, transportation of loop take up from surface to mentioned belt conveyor -4.75MT
Loading, unloading, carrying, transportation of 01 nos of load table from surface to mentioned belt conveyor -1MT
Fencing of drive tail end etc including cost of DA,oxygen and welding electrodes
Fabrication of load table at surface workshop including cost of DA, Oxygen & welding elctrodes.
Fabrication and fitting of dischage and tail end scrapper
Loading, unloading transportation of control cable & assy laying and fitting
Transportation and placing electrical VCB, starter, cable (power and control) from surface to drive head - 1 set
Holding down bolt for drive head
New installation of 2x150KW, 1200mm belt conveyor with 215 mtr structure at RV seam in 8 dip 2nd belt. (Inclusive of EPF/CMPF)
Loading, unloading, carrying, transportation of 2x150 KW, 1200mm heavy duty drive head with Motor and starter from surface to mentioned belt conveyor -
Loading, unloading, carrying, transportation of other structure assoiciated with Drive head including discharge unit, loop take assembly, tail end assembly and safety guard from surface to mentioned belt conveyor -
Loading, unloading, carrying, transportation of 215mtr structure at mentioned belt conveyor -@ 146kg per mtr
Loading, unloading, carrying, transportation of belt from surface to belt install site then laying and lapping of belt 360mtr
Loading, unloading, carrying, transportation of 01 nos of load table from surface to mentioned belt conveyor -1MT
Faencing of drive tail end etc including cost of DA,oxygen and welding electrodes
Fabrication of load table at surface workshop including cost of DA, Oxygen & welding elctrodes.
Fabrication and fitting of dischage and tail end scrapper
Loading, unloading transportation of control cable & assy laying and fitting
Fabrication & fitting of veticle support for structure hanging portion from discharge to loop take up including coast of DA and 02 nos oxygen cylibnder
Transportation and placing electrical VCB , cable (power and control) from surface to drive head - 1 set
Holding down bolt for drive head
Total impact of GST for the purpose of CTC
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.39 MB
BOQ_368754.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid