REPAIRS TO ROOF TREATMENT, ROOF SHEET, CEILING, PLAASTERING AND TILING AT ZONE A AT ZAKHAMA MIL STN

Amount

Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets. complete all as specified and directed.

M&L for wrought sawn 2nd class hard-wood in scantling fixed.complete all as specified and directed.

S&F for 4mm thick, plywood, grade BWR,type BB, fixed with nails to timber frame work fixed on walls, complete all as specified and directed.

All as per item S No 4 above but on ceiling

M & L non asbestyos fibre cemet building boards 4mm thick fixed/insrted to GI frame work, complete all as specified and directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermidiate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and inculding ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermidiate channel with connecting clips across the intermidiate channel at 457mm centre to centre. complete all as specified and directed.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasternerrs 12.5mm dia 40mm long complete all as specified.

Dismantling timber scantling unframed works in fillets, rails posts, rafters, purlins etc under 40 Sq cm in section, complete all as specified and directed.

M&L for 2nd class clean swan hardwood plain fillets,square,rectangular or triangular in section, se-cured with nails or brads ( sectional area Exc 13 & n exc 25 sq. cm). complete all as specified and directed.

All as per item No 10 above but bull nosed,splayed,chamfered or rounded on one edge or f ace (sectional area 6 & nexc 13 sq.cm),

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering. complete all as specified and directed.

S&F pre-painted galvaume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550Mps as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvaume aluminium zinc coating GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550Mps as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Galvanized, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with L-type of J-type or cranked hook bolts and washers, in roofs, etc with grade of zinc coating 275 complete, complete all as specified and directed.

All as per item No 15 above but except sheet

S&F plain galvanised mild steel sheeting 0.63mm thick as in ridges hips, valley gutters drip and straight flashings(length and firth as fixed) with grade of zink coating 275 , complete all as specified and directed.

All as per item S No 17 above but in steeped flashings

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced.complete all as specified and directed.

M&L PCC 25mm thick type B-1, 1 : 2 : 4 (12.5mm graded stone aggregate) as in sub-base to receive floor finishes.

M&L PCC 75mm thick type D-2, 1 : 4 : 8 (40mm graded stone aggregate) as in sub-base to receive floor finishes.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 to receive wall finishes. complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) and rubbish off premises, complete all as specified and directed.

M&L non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement morat (1:6), complete all as specified and directed.

All as per item ser No 24 above above but as in skirting,dado etc .over and including rendering 10 mm thick plaster in Cement Mortar (1:4) as in backing coat.

M&L non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and and including 15 mm thick screed bed in cement morat (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and joinded in neat cement slurry and pointed in white or coloured cement to match over and and including including rendering 10 mm thick plaster in Cement Mortar (1:4) as in backing coat. complete all as specified and directed.

Taking/ removing old treatment of any description including loose filling materials or lime coba from RCC roof slabs by means of MS scrapper or any other suitable tools and removing debris to a distance n exc 250mtr from starting point and deposited where directed, complete all as specified and directed.

Racking out joints to roof slabs and filled with shalitex sealing compound into the joint. Make STP/ TIKI tar, complete all as specified and directed.

M & L for 40mm thick PCC type B0, 1:2:4 (Using 12.5mm graded stone aggreagate ), complete all as specified and directed.

M & L for rendering 20mm thick CM 1:3 with mixing of water proofing power @3% by weight of cement including finishing even and smoothW/O using extra cement complete (Note water proofing power shall be measured separataly), complete all as specified and directed.

Supply only integral water proofing compound ISI Marked

Providing and laying APP modified water proofing membrane 3mm thick with non woven ploster reinforcedment having weight not less than 3.5kg per Sqm over a coat of bituminous primer oil based for membrane by the respective manufacture @0.30 ltr per sqm including one coats of bituminous based aluminium paint on top surface complete all as specified and directed.

M&L including preparation of new wood and wood based surfaces of any description, over 10cm in width or girth and treating two coats of varnishing over one coat of wood filler liquid transeparent. complete all as specified and directed.

All as per item No 20 above above but one coat on old surfaces.

M & L for Preparing new zinc (or galvanised) surfaces to recieve painting , by coating with mordant solution including washing and cleaning etc and two coat of synthetic enamel paint over a coat of red oxided zinc chorome primer complete all as specified and directed.

M & L for Preparation of new surfaces of ceiling and applying two coat of oil bound washable distemper (oil emulsion) complete all as specified and directed.

M/S SHANTI UDYOG

M/S RAHUL TRADING CO.