System Strengthening Work under EDD-II, Mirzapur

Amount

Supply of following Decentralized materials at the works site as per RESSPO norms

Exctention Bracket with clamp and nut bolt

Stone pad 300x300x75 mm

X-arms holding clamps with bolts & nuts.

F-bracket with bolts & nuts

Al. binding wire

M.S clamp for Top, T-off channel with bolts & nuts

Guarding Angle Clamps

P.G clamps for weasel conductor

Danger board with clamp & bolts

Barbed wire GI

E-bracket with bolts & nuts

Dead end clamp for pole/bracket with nuts & bolts

I Hook ( for dead end Clamp)

Suspension clam with nuts & bolts

I Hook ( for suspension Clam)

M.S clamp with nuts bolts painted with redoxide

L.T connector A type

L.T connector B type

L.T bare nuetral connector

1x35 sq mm AC cable (XLPE)

Stay Clamp with clamp and nut bolt

All. Binding wire 6 mm

Safe Cartage of following all materials from ESC, Mirzapur to work Pits site including loading & unloading charge

10 MVA Transformer (Provided by Department)

33 KV VCB with single T/F control pannel and CT 200/100/1 A with structure (i) 33 KV VCB (ii) Control pannel I/C for 33 KV single T/F(iii) CT 200/100/1-1A (iv) Steel Structure (Provided by Department)

11 KV VCB O/G, 200/100/5A (Provided by Department)

11 KV VCB I/C, 600/300/5A (Provided by Department)

11 KV XLPE Cable size 3x300 mm2 for Above Sub-Station (Provided by Department)

11 KV XLPE Cable size 185 mm2 (Provided by Department)

11 KV XLPE Cable size 120 mm2 (Provided by Department)

Cable jointing Kit O/G, I/C (Provided by Department)

Control Cable size 4x2.5 mm2 (Provided by Department)

Control Cable size 2x2.5 mm2 (Provided by Department)

33 KV Bus Isolator (Provided by Department)

Structure for above (Provided by Department)

33 KV Post Insulator set (Provided by Department)

Structure for above (Provided by Department)

Transformer bus complete with structure (Provided by Department)

33 KV lightening arrestor (Provided by Department)

Structure for above (Provided by Department)

5 MVA Transformer (Provided by Department)

24 Volt Battery and Battery charger with Cabinet

90 lbs rail pieces (44.64 Kg/M) (Provided by Department)

33 KV Pin Insulator (Provided by Department)

33 KV Pin with nuts (Provided by Department)

ACSR Dog Conductor (Provided by Department)

ST Poles 11 mtr long (Provided by Department)

PCC Poles 8.5 mtr long (Provided by Department)

Line materials with ACSR Weasel Conductor (Provided by Department)

Arial Bunch Cable 3x120+95+1x16 mm2 (Provided by Department)

Arial Bunch Cable 3x195+1x70+1x16 mm2 (Provided by Department)

Distribution boxes/Kiosk for LT pole/bracket with clamp & nut bolt (Provided by Department)

11 KV Cross Arm (Provided by Department)

11 KV Pin Insulator with Pin (Provided by Department)

33 KV Pin Insulator (Provided by Department)

33 KV Pin (Provided by Department)

11 KV Disc Insulator with fitting (Provided by Department)

11 KV Stay Set Complite (Provided by Department)

Earhing Complite (Provided by Department)

T-off Channel (Provided by Department)

Top Channel (Provided by Department)

Base Angle (Provided by Department)

11 KV Dropper Channal (Provided by Department)

Cross Beacing MS Angle (Provided by Department)

Distribution Box LT (Provided by Department)

1x400 mm Sq PVC LT Cable (Provided by Department)

1x150 mm Sq PVC LT Cable (Provided by Department)

1x70 mm Sq PVC LT Cable (Provided by Department)

All Lugs (Provided by Department)

400 KVA T/F (Provided by Department)

250 KVA T/F (Provided by Department)

100 KVA T/F (Provided by Department)

63 KVA T/F(Provided by Department)

25 KVA T/F(Provided by Department)

Erection

Erection of single support ST/PCC pole for construction of 11 KV/LT line including digging of pit, fitting of all accessories, back filling of earth & others required work.

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Earthing of Poles

Stringing & sagging of 3 phase 11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering.

Erection of Sectional Double Pole Structure of ST pole including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets with materials & other required works.

Erection of Sectional Double PCC Pole Structure with the help of one pole already erected including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets with materials & other required works.

Construction of Transformer plinth for 250 KVA Transformer of 2x2x1.5 mtr. Including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials.

Well type earthing of 250 KVA Transformer by using B class G.I. pipe of 1.5 " dia and making hand pipe type earth boring IInd strata of water or 60 ft. whichever is deeper about 6" of G.I. pipe shall remain above ground level 2 No. G.I. earth clamp shall also be welded to the portion of pipe which is above the ground level. Through this G.I. Clamp and G.I. Strip 30x5mm duly galvanized shall be connected with nut & bolts. Every DT shall have 2 such earthing, One earthing for T/F neutral and second earthing for T/F body. All requred materials shall by provided by the contractor.

Fencing of T/F with M.S. Square mesh welded/fixed on M.S. Angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing

Mounting of 25 KVA Transformer as per RESSPO norms

Mounting of 63 KVA Transformer as per RESSPO norms

Mounting of 100 KVA Transformer as per RESSPO norms

Mounting of 250 KVA Transformer as per RESSPO norms

Mounting of 400 KVA Transformer as per RESSPO norms

Gaurding of 11 KV line as per RESSPO norms

Laying of 11 KV XLPE cable size 3x300/185 mm2 including cost of sand & bricks( duble ckt)

Laying of 11 KV XLPE cable size 3x120 mm2 Overhead ( duble ckt)

Filling of I/D/O/D 11 KV cable jointing kit size 3x300/185/120 mm2

Making of 11 cable box Mounted with switchgear and T/F

Installation of 5 MVA 33/11 KV Power Transformer as per RESSPO norms

Foundation of Pilth 5 MVA Transformer

Neautral 3 no Pipe 60 feet boring 1 delta Earthing of 5 MVA Transformer including cost of all materials GI Stripe 50X 6" size as per RESSPO norms

Installation of 10 MVA 33/11 KV Power Transformer as per RESSPO norms

Foundation of Pilth repair for 10 MVA Transformer

Neautral 3 no Pipe 60 feet boring 1 delta Earthing of 10 MVA Transformer including cost of all materials GI Stripe 50X 6" size. as per RESSPO norms

Installation of 11 KV VCB pannel (O/G), 200/100/5A

Installation of 11 KV VCB pannel (I/C), 600/300/5A

Installation of 33 KV VCB with single T/F control pannel and CT 200/100/1 A with structure (i) 33 KV VCB (ii) Control pannel I/C for 33 KV single T/F (iii) CT 200/100/1-1A (iv) Steel Structure

laying of Control Cable size 4x2.5 / 2x2.5 mm2 Trunch

Installation of 33 KV Bus Isolator

Installation of Structure for above

Installation of 33 KV Post Insulator

Installation of Structure for above

Installation of 33 KV lightening arrestor

Installation of Structure for above

Installation of Transformer fitting fixxing and Grouting of cable stand with all materials.

Testing & commissioning of I/C/O/G 11 KV swichgear

Testing & commissioning of 33 KV VCB with single T/F control pannel and CT 200/100/1 A

Construction of plinth & foundation of 11 KV VCB as per RESSPO norms

Painting of all equipments

Earthing for Outdoor structure such as Bus Isolator, Post Isolator set, Lighting Arrestor, Brecker & CT etc. through boring till the water level with G.I Pipe 40mm & G.I strip 50X6 '' and connect of all structure as per RESSPO norms

Earthing for Indoor structure including 11 KV VCB IC/OG pannel etc through boring till the water level with G.I Pipe 40mm & G.I strip 50X6 '' and connect of all VCB Pannel as per RESSPO norms

Fencing of Switchyard with gate etc through Barbed wire as per RESSPO norms

safe Cartage of old received back 5 MVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Dismantalling of 11 KV VCB Pannel

Safe Cartage of Old received back 11 KV VCB Pannel from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 25 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 63 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 100 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 250 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

ASTHA TRADERS

M.K.S Enterprises