Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.1 Cr
EMD Value
₹3.1 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Training Hub at DHH under National Health Mission in the Sambalpur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/027
NBCC/ODISHA/ZO/NHM/NIT/22-23/027
Open Tender-Domestic
Civil Works General
Sambalpur, Odisha
₹11,800
₹3.1 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation of foundation
trenches in hard soil including dressing of
sides and levelling the bed up to the
required depth and depositing the
excavated materials away from the work
site within 50m initial lead & 1.5m initial
lifts with sundries & T&P required for the
work complete including cost of all
labour,labour cess,T&P,sundries etc. as
directed by the Engineer in charge.
Filling in foundation trenches and plinth,
with excavated earth including laying the
earth in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed
as directed by the Engineer-in-charge.
Supplying and filling in foundation and
plinth with good quality river sand including
watering, ramming with cost, conveyances,
4 3 royalties, taxes of all materials and cost of Cum 226.19 601.33 1,36,014.38
all labour with T&P required for the work
etc. complete as per specification &
direction of Engineer-in-charge
Diluting and injecting chemical emulsion for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous
chemical barrier under and all-round the
column pits, wall trenches, basement
excavation, top perimeter of building,
expansion joints, over the top surface of
5 4 consolidated earth on which apron is to be Sqm 625.28 162.84 1,01,820.60
laid, surroundings of pipes and conduits etc.
complete as per specifications (plinth area
of the building at ground floor only shall be
measured for payment) including cost of all
materials, labour, T&P etc complete in all
respect and as per direction of the Engineer-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
6 5 agregate 40mm nominal size) as levelling Cum 45.63 4885.67 2,22,933.21
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone
aggregate 12mm nominal size) as levelling
course in foundation and plinth etc.
including tempering, curring, shuttering
etc.complete all depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm.
having crushing strength not less than 75
kg. Per. Sqr. Cm. in cement mortar of mix(
1:6) with ordinary Portland slag
cement(PSC) and screened & washed sand
for mortar after immersing the bricks for 6
(Six) hours in water before use in
8 7 Foundation & Plinth including splays cutting, Cum 25.82 5080.61 1,31,181.30
circular moulding, corbelling, chamfering
and similar such type of works, watering
and curing etc. including cost, conveyance,
loading, unloading, royalties and taxes of all
materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc.
complete in all respect as directed by the
Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not
less than 75 kg. Per Sqr. Cm. in cement
mortar of mix (1:6) with approved grade
cement and screened & washed sand for
mortar after immersing the bricks for 6
(Six) hours in water before use in
9 8 Superstructure including splays cutting, 0 0.00 0.00 0.00
circular moulding, corbelling, chamfering
and similar such type of works, watering
and curing etc. including cost, conveyance,
loading, unloading, royalties and taxes of all
materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc.
complete in all respect as directed by the
Engineer-in-charge
Half brick work with Fly Ash brick masonry
in cement mortar (1:4) in super structure
having a crushing strength of not less than
75 kg./sqcm with dimensional tolerance ±
2% including splays cutting circular
moulding chamfering and corbelling and
similar such type of works with all
13 12 necessary projections watering and curing 0 0.00 0.00 0.00
after immersing the bricks in water at least
for six hours before use including cost,
conveyance, royalties and taxes of all
materials with all labour,labour cess and T
& P required for the work complete in all
respect as per direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
16 15 compaction concrete by using vibrators, 0 0.00 0.00 0.00
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
17 16 position.
Ground floor 0 0.00 0.00 0.00
19 18 b) Column up to plinth Cum 21.00 13136.23 2,75,860.87
21 20 d) Column above plinth Cum 32.03 13136.23 4,20,753.51
28 27 a)Column up to Roof Beam Lvl. Cum 34.05 14692.18 5,00,268.73
35 34 a)Column up to Roof Beam Lvl. Cum 12.77 16554.22 2,11,397.39
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Providing 12 mm thick cement plaster with
cement mortar of mix (1:6) with screened
and washed sharp sand for mortar and
finished smooth to the rough surface of
walls in all heights after racking out joints
including watering and curing, rounding of
corners, providing grooves where ever
necessary with cost, conveyance, royalties
of all materials with cost of all labour,labour
cess, T&P, and scaffolding required for the
work etc. complete in all respect as directed
by the Engineer in charge.
Providing 16 mm thick cement plaster with
cement mortar of mix (1:6) with screened
and washed sharp sand for mortar and
finished smooth to the rough surface of
walls in all heights after racking out joints
including watering and curing, rounding of
corners, providing grooves where ever
necessary with cost, conveyance, royalties
of all materials with cost of all labour,labour
cess, T&P, and scaffolding required for the
work etc. complete in all respect as directed
by the Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing 6 mm thick cement plaster with
cement mortar of mix (1:4) with screened
and washed sharp sand for mortar and
finished smooth to R.C.C. work after closed
deep chipping & slurry treatment including
watering and curing, rounding of corners,
providing grooves where ever necessary
with cost, conveyance, royalties of all
materials with cost of all labour,labour cess,
T&P, and scaffolding required for the work
etc. complete in all respect as directed by
the Engineer in charge.
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm
thick cement mortar (1:4) (1 cement : 4
55 54 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P
etc. required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)(1
58 57 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of
the Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick
& size of 600x600 mm Glaze vertified
floor tiles of matt finish with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B
Ib). laid on 20 mm thick cement mortar
(1:4) (1 cement : 4 course sand) and filling
joints with white cement of approved
quality including cost of all materials, labour
T&P etc. required for the work all complete
as per direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of 8-10 mm thick
& size of 600x600 mm Glaze vertified
floor tiles of matt finish with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B
64 63 Ib). laid on 12 mm thick cement mortar 0 0.00 0.00 0.00
(1:3) (1 cement : 3 course sand) jointed
with slurry mixed with pigment to match
the shades of the tiles etc. complete
including cost of all materials, labour T&P
etc. required for the work all complete as
per direction of the Engineer-in-charge.
Supplying, fitting and fixing of Antiskid
Ceramic Floor Tiles in flooring in toilets
using Digital matching anti-skid ceramic
floor tile (having minimum thickness 7 mm
to 8 mm & size 300 mm x 300 mm )
confirming to I.S 13755 of approved quility
and shade on 20mm thick ded of cement
morter of mix (1:4) laid in proper slope and
gradient with screened & washed sharp
river sand for mortar and grouted with neat
white cement slurry, joining the anti-skid
ceramic floor tiles with neat white cement
slurry, mixed with required (tiles are to be
immersed in the water for required time
before use) quantities of pigments of
approved marks to match the shades of the
anti-skid ceramic floor tiles if required
including cost, conveyance, loading,
unloading, stacking, royalties of all
material, cost of all labour , sundries, T&P
required for the work , watering,complete in
all respect as per specification excluding
GST aas per specification as directed by
Engineer-in-charge
Supplying, fitting & fixing of 300mm x
600mm Germ free Glaze Ceramic wall tiles
having thickness 6.5mm to 7.0 mm
confirming to IS 13753 in dadoes, skirting
and risers of steps laid on 12 mm thick
cement mortar (1:3) (1 cement : 3 course
sand) jointed with slurry mixed with
pigment to match the shades of the tiles
etc. complete including cost of all materials,
labour T&P etc. required for the work all
complete as per direction of the Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Chequered tiles
in floors of approved make laid on 20 mm
thick cement mortar (1:4) (1 cement : 4
73 72 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P
etc required for the work all complete as
per direction of the Engineer-in-charge
Providing and fixing seasoned sal wood
work in frames at any locations including
doors, windows,cupboard, clerestory and
other frames fixing in position including
cost of hinges, M.S. flat (30mm x 6mm)
hold fasts lugs or dash fasteners of
required dia and length as per drawing /
specification, at all floors and all heights.
Supplying, fitting and fixing Factory made
32mm thick flush door, both side laminated
with 1mm mica of Green Ply / Century /
Mayur or equvalent make with seven years
guarantee against termite and borer etc.
complete with wooden hinged cleats
including cost of Aluminium fittings like
Tower Bolt, Handel, Aldrop, Hinges, Screw
etc., with cost conveyance and taxes of all
materials, all labour etc. complete in all
respect as per direction of Engineer-in-
Supplying and fixing of Anodisied 15
microns / Powder coated 50-60 microns
approved colour aluminium 50mm
Casement series door cum fixed Unit with
suitable aluminium extrued profiles. the
system should design to accommadate 5mm
clear Toughen glass 50% and 50% 4MM
ACP. the rate inclusive of hardwares like
81 80 antilift,roller, espag lock cum handle,epdm 0 0.00 0.00 0.00
gaskets, felt along with all accessories etc
complete. the gap between the wall and
window will be filled with silicon weather
sealent in the outer side.Casement Door
Outer frame ( 50*46 mm SERIES) Sash -
78.5 * 58 mm ) + Mullion 66 * 50mm +
Beeding 35.5 *25.5 mm) Make -
WINPLUS+ / ALUPURE / ALUK
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made FRP( Altematly called GRP)
door frame of size 75mm x 100mm
fabricated using E - glass chopped strand
mat (CSM) U.V stabilised inopathalic Gel
coat and impregnated with inopathalic resin
The thickness of the GRP skins shall not be
less then 2.0 mm . The door frame consists
of four segments which are provided with
plug in socket arrrangement in-situ-in
mould. The segments are plugged in and
are joined together by means of srew. The
GRP frame shall be provided with wooden
reinforcement on six locations for high srew
holding capacity for fixing metalic hold fast
and shall be consolidated by filling with
medium density foam / plaster of paris with
fibre reinforcement , six number of 260mm
x 25mm x 5mm size 'S' shaped M.S flat hold
fast shall be provided with the frame. The
material and process for manufacturing the
finish of door frame shall conform to RV-
TIFAC composites Design centre's standards
and specifications . The finish of door frame
will be plain colour white /Ivory/Beige/Light
grey / Golden brown / Mahogany/ Teak
wood /sand stone Champagne/Pastel blue
or any other colour using high quality
pigment complete in all respect as per
specification and direction of the Engineer in
Charge. etc. complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made GIRID FRP or called GRP
sandwich composite door shutter of 32mm
thick laminated with two GRP skin with
good grain finish fabricated using UV
stabilised isoppthalic gel coat and one layer
of 450 gsm E-glass chopped strand mat
(CSM) impregnated with ortopathilic resin
The thickness of the skins shall not be less
than 1.50mm . Expanded polysryne ( EPS)
structural foam panel of 29 mm tickness
and a density of 20kg/cu.mts shall be used
as core material wooden reinforcements
made of sesasoned sal wood block of cross
section not less than 28mm x 32mm and
87 86 also necessary sal wood reinforcements for 0 0.00 0.00 0.00
fitting the metal fittings such as lower bolts
,aldrops, handles etc. shall be provided . A
structural adhesive compatible with
(EPS)foam shall be used for bending the
core material. the sal wood reinforcements
and the skin The material and process for
manufactuing te door shutter shall conform
to RV -TIFAC components design centre's
standards and specification and the door
shutters tested in conformation to IS 4020-
1998. The Finish of door shutter will be
plain colour as per specification and
direction of the Engineer in Charge. etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made 2.5 track
KOMMERLING uPVC white colour sliding
window with bugmesh comprising of uPVC
multi-chambered frame having section
Frame 88mm x 49mm, Window sash:
37mm x 61mm, Bugmesh sash: 58mm x
32mm made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5 mm. The windows
profile should fulfill the requirements of
Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and
90 89 Modulus of Elasticity should be tested in 0 0.00 0.00 0.00
accordance with ASTM/DIN-ISO standards
and the thermal conductivity as per IS
standards. The window comprising of uPVC
extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100
x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and
necessary stainless steel screws etc. After
fixing frame the gap between frame and
adjacent finished wall shall be filled with
weather proof silicon sealant over backer
rod of required size. The sash will be fitted
with 5mm clear glass ( Toughen ). Make -
KOMMERLING / FENESTA / RIHAU
Supplying, fitting & fixing in all floors of
M.S. grills, grill gates, M.S. gates, garage
door, collapsible gates with top and bottom
rails, steel windows, critical frames for
windows, stair case and parapet railing
made out of M.S Square bar/ flat including
stair case hand railing with 40mm. dia
G.I.pipe etc. including painting two coats
over a coat of redoxide primer as per
approved drawing and design with cost of
all materials & labour, taxes, labour cess,
T&P, sundries etc. complete in all respect as
per specification & direction of the Engineer-
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance,
taxes of all materials, cost of all
labour,labour cess T&P etc. complete as per
the direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved anti-
fungal weather seal paints (ISI) of approved
colour, shade on wall surface over a coat of
wall primer(ISI) water bound including sand
102 101 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete
as per specification & direction of Engineer-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to
receive painting in walls, at all heights with
staging wherever necessary with cost,
conveyance, taxes of all materials, cost of
all labour,labourcess, all T&P etc. required
for the work complete in all respect as per
the direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside
surface of walls finished with Acrylic Wall
putty (water based) of make (Birla / JK)
and finished smooth & even surface to
110 109 receive painting using roller to the final coat 0 0.00 0.00 0.00
including cost of scaffolding staging charges
with cost, conveyances, taxes of all
materials, cost of labour, T&P required for
the work etc. complete for all floors as per
specification & direction of the Engineer-in-
Painting two coat with approved synthetic
enamel paint to new wood work over a coat
of Red oxide primer including cost,
conveyances, royalties, taxes of all
materials and cost of all labour with T&P
required for the work etc. complete as per
specification & direction of Engineer in
Painting two coats to new Iron work with
approved enamel paints of approved colour,
shade including sand papering, polishing
117 116 the surface, cost, conveyances, taxes of all 0 0.00 0.00 0.00
materials and cost of all labour,labour cess
with T&P etc, complete as per specification
& direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless
steel of 304 grade in hand railing using
50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @
0.90mtr. C/C and stainless square pipe
bracing of size 32mm x 32mm x 2mm in 3
rows in stair case as per approved design
and specification, buffing, polishing etc with
cost, conveyance of all materials, cost of all
labour,labour cess, T&P etc. required for the
work complete in all respect as per direction
of the Engineer-in-charge.
Providing 2.5cm thick Grading Concrete
over roof slab with cement concrete (1:2:2)
using 6.7mm size black hard granite
crusher broken chips and screened &
washed sharp sand for mortar and finished
smooth to the rough surface of slab
including watering and curing with cost,
conveyance, royalties and taxes of all
materials with cost of all labour, labour cess
and T&P required for the work etc. complete
in all respect as directed by the Engineer in
126 0 Sub-Total of Civil Works 0 0.00 0.00 2,27,76,522.04
127 0 Plumbing Works 0 0.00 0.00 0.00
Providing all materials, labour, T&P for
fitting and fixing white glazed vitreous china
water closet (European pattern) with seat
cover (solid) and Cistern of approved make
in all floor including supply of sutaible
128 1 bracket, PVC wall plug and Brass screws NOS 18.00 6070.86 1,09,275.55
etc. all complete including cost, taxes and
conveyance as per specification all complete
as per direction of Engineer-in-charge.
Make:HINDWARE/PARRYWARE/CERA.
(As per Cat no. WHT-551 of Jaquar)
Supply all materials and labour for fitting
and fixing of following size white glazed
vitreous china Under counter wash hand
basin of approved make in all floor of
approved quality including cutting the walls
& floor and making good the damages with
129 2 cement concrete etc. including all taxes, NOS 7.00 4728.50 33,099.47
duties, transportation etc. all complete as
per direction of EIC.
(Make:JAQUAR/HINDWARE/PARRYWARE/CE
Cat no. FLS-WHT-5701 of Jaquar)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply all materials and labour for fitting
and fixing of following size Half Pedestal
wash hand basin of approved make in all
floor of approved quality including cutting
the walls & floor and making good the
130 3 damages with cement concrete etc. NOS 14.00 5566.77 77,934.75
including all taxes, duties, transportation
etc. all complete as per direction of EIC.
(Make: JAQUAR/HINDWARE/PARRYWARE)
(As per Cat no. Jaquar make having cat no -
Supplying all materials, labour, T&P and
fixing with labour ,T&P as per specification ,
the following Brass/ CP (Hindware) / G.M.
131 4 fittings at appropriate locations to thr pipe 0 0.00 0.00 0.00
lines at all floors and at all heights, of
approved make confirming to relevent IS
specification . etc complete in all respect.
Health Faucet ABS SS braided hose 1.2 m
(As per Cat no.ALD-579 of Jaquar)
(Make: Jaquar/Hindware)
Two-way Bibcock with wall Flange.
133 6 (As per Cat no.FLR-5041N of Jaquar) 0 0.00 0.00 0.00
(Make: Jaquar/Hindware)
15mm dia pillar cock .
(As per jaquar Cat No- FLR-5011N)
15mm dia Angle Stop cock with Wall Flange.
136 9 (As per Cat no. FLR-5053N of Jaquar) NOS 43.00 1768.82 76,059.26
(Make: Jaquar/Hindware)
15mm dia Concealed Stop cock with Wall
(As per Cat no. F200008 of Hindware)
( Make: Hindware/Jaquar )
Bibcock with wall Flange.
138 11 (As per Cat no.FLR-5047N of Jaquar) NOS 14.00 1403.49 19,648.89
(Make: Jaquar/Hindware)
Providing and fixing 700x500 mm beveled
edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard
board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
(As per Cat no.-Jaquar of Make-B3510106).
140 13 Rectangular shape 700x500 mm NOS 16.00 1835.49 29,367.84
C.P. Soap Dish holder.
(As per Cat no.ACN-1177N of Jaquar)
32 mm C.P. Bottle Trap 32mm with 250 &
190 mm Long Wall Connection pipe & wall
(As per Cat no.-ALD-769L250X190 of
Jaquar) (Make:
Jaquar/Hindware)
32mm dia C.P.waste coupling 32mm SS
(Full Threaded)
(As per Cat no.ALD-705 of Jaquar)
(Make: Jaquar/Hindware)
Providing and fixing PTMT towel rail 600
mm long complete with brackets fixed to
wooden cleats with CP brass screws with
144 17 concealed fittings arrangement of approved NOS 6.00 1461.08 8,766.46
quality. (As per Cat
no.jaquar-AQN-7711B)
(Make: Jaquar/Hindware)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Overhead shower 120 mm Round shape
Multi Flow(ABS body crome plated with
145 18 Gray Face Plate)with Rubit Cleaning NOS 6.00 4351.90 26,111.39
System. (As per Cat no.OHS-1799 of
Shower Arm Casted 190mm Long flat shape
for Wall mounted Showers with flange.
Bath Spout with wall Flange.
Providing no.F360009
and of Hindware)
fixing Stainless Steel Single
Bowl Sink with Drain Board Undermount -
Matt Finish (47” L x 19” W x 8” D)
(Parryware, Cat no.-C856799 with C.I.
brackets and stainless steel plug 40 mm,
148 21 including painting of fittings and brackets, 0 0.00 0.00 0.00
cutting and making good the walls wherever
Providing 15 mm dia Sink cock of Hindware
having cat no - F110021, including painting
of fittings and brackets, cutting and making
good the walls wherever required :
Fitting and fixing Water purifier for drinking
(with rate of recovery ratio more than 60-
65%). water inlet and drain out connections
complete in all respects similar to
Aquaguard or similar approved make -
(Make - Ion Exchange)in each floor.
Floor drain 160x160 mm dia stainless steel
Supplying all materials, labour & T&P for
fitting and fixing of following sizes of white
glazed vitreous china flat back half stall
urinal basin confirming to specification of
approved make as per IS-2556 with ISI
mark in all floor along with supply & fixing
of necessary component parts like pair of
153 26 C.I./M.S. bracket including connection from 0 0.00 0.00 0.00
water supply pipe with all taxes, duties,
transportation etc. all complete as per
specification & direction of the Engineer-in-
(Make:JAQUAR/HINDWARE/PARRYWARE/CE
RA) (As per Cat
no.- URS-WHT-13263 Jaquar)
154 27 Flat back half stall urinal . (male urinal) Set 3.00 14505.50 43,516.51
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes IS 15778,SDR-13.50
having thermal stability for hot & cold water
supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting
chases and making good the same including
testing of joints complete as per direction of
Engineer in Charge.
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
157 30 Ground Floor meter 18.00 343.97 6,191.46
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
160 33 Ground Floor meter 20.00 434.95 8,698.96
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC)pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings This includes jointing of pipes &
164 37 fittings with one step CPVC solvent cement, 0 0.00 0.00 0.00
trenching, refilling & testing of joints
complete as per direction of Engineer in
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
165 38 40 mm nominal outer dia Pipes meter 30.00 936.33 28,089.90
Supply, Fixing, jointing, testing and
commissioning of uPVC SWR pipe type B
(SWR) pipes(SCH-80) for Soil - waste &
166 39 Kitchen waste pipe cut to required lengths 0 0.00 0.00 0.00
including all necessary fittings and specials
such as bends, junctions offsets, access
Supplying all materials,labour and T&P for
fitting and fixing of following dia UPVC Rain
water pipes and fittings along with fixing to
wall complete in all respect.
Providing, laying and jointing PVC SWR soil,
waste and vent pipes under floor
/suspended under ceiling / fixed on the wall
face conforming to IS:15905-2011 , ISO-
6594 Includes necessary fittings like (plain
171 44 or door)tees, bends, collars, crosses 0 0.00 0.00 0.00
reducers, Y, etc, of approved make, drip
seal joint, suspended under ceiling /
embedded in floor. Includes making
connection with sanitary fittings,of
approved make etc all complete .(As per
Supreme/Kishan etc)
177 50 100 mm Single Branch Plain "Y" 45 D Nos. 6.00 357.54 2,145.24
178 51 75 mm Single Branch Plain "Y" 45 D Nos. 6.00 185.26 1,111.56
179 52 100mm Double Branch Plain 'Y' 45D Nos. 2.00 336.30 672.60
180 53 100mm Single Branch Door 'Y' 45D Nos. 2.00 575.84 1,151.68
184 57 100 mm Pipe Wall Clamp Nos. 18.00 38.35 690.30
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, fixing, jointing and testing PP
mineral filled low noise level Soil & Waste
piping system as per BS EN 1451, SN4-S16,
with minimum density for pipes and fittings
1.4 gm/cm3. Pipes and fittings made from
Polypropylene-M (mineral reinforced) and
available from 50 – 160 mm with push fit
SBR type rubber ring sockets for easy
installation. Pipes should have 3 layer
design. Should have hot water resistance up
95ºC for short term loading (90ºC for long
term loading). Piping system should have
chemical resistance of pH 2-12. Fittings
should have swept design from 75-160mm
and depth gauge for proper fittings against
185 58 thermal expansion and contraction, should 0 0.00 0.00 0.00
have top marking at every 15° intervals in
angular rotation for better alignment. Piping
system includes all required fittings &
accessories such as coupler, bend, tee, Y,
reducer, access pipe, multi floor traps,
Nahni trap with extension piece etc. for
conveying soil, waste & rainwater purpose
in floors, ceiling suspended, or on walls,
with leak proof joints etc. Setting the pipe
in 1:2:4 CC in case of concealed plumbing,
wall chasing, holes, supporting, clamping,
covering back with chicken mesh & plaster
and making the wall good as per approved
shop drawing. Testing as per tender
specifications/EIC.
Providing all materials, labour, T&P for
fitting & fixing of following Bronze Ball
Valves confirming to IS-778 with ISI mark
in all floor & fixing with the pipes after
cutting the pipes to required shape & size
187 60 including wastage etc. of following nominal 0 0.00 0.00 0.00
diameter, all complete including testing the
joints with required water pressure.The cost
inclusive of all taxes,duties,transportation
scaffolding etc. all complete as per
specification and direction of Engineer-in-
Providing all materials labour, T&P for
making grooves in bricks/stone masonary
walls vertically or horizontally up to
required depth and width in all floor for
laying of pipes and fittings up to 50mm dia,
testing the joints with required water
192 65 pressure and making good the damages Mtr. 90.00 187.97 16,917.66
with cement concrete 1:2:4 with 12mm size
h.g.c.b.chips and finished smooth with
cement morter (1:4) to original shape
including cost of materials, curing,
conveyance, taxes of all materials etc. all
complete as per specification & direction of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing all labour,T&P for cutting holes in
bricks or stone masonry wall for taking
pipes in all floors and making good the
damages with cement concrete 1:2:4
193 66 finished smooth with CP 1:4 to original 0 0.00 0.00 0.00
shape including cost of all materials, curing,
conveyance, taxes, duties etc. all complete
as per specification & direction of Engineer-
For 25mm to 110mm dia pipe to pass in
250mm thick wall
Providing all labour,T&P and cutting holes in
RCC chajja/roof/floor for taking pipes
195 68 through and making good the damages with No. 40.00 189.51 7,580.32
supply of all required materials etc.
complete as per the direction of the
Engineer-in-charge.
196 69 Square Gully trap 110mm (IP) No. 9.00 807.12 7,264.08
197 70 EXTERNAL PH WORKS (WATER SUPPLY) 0 0.00 0.00 0.00
Excavating trenches of required width for
pipes, cables, etc including excavation for
sockets, and dressing of sides, ramming of
bottoms, depth upto 1.5 m, including
getting out the excavated soil, and then
198 71 returning the soil as required, in layers not 0 0.00 0.00 0.00
exceeding 20 cm in depth, including
consolidating each deposited layer by
ramming, watering, etc. and disposing of
surplus excavated soil as directed, within a
lead of 50 m : All kinds of soil
199 72 Pipes, cables etc, not exceeding 50 mm dia. meter 25.00 80.24 2,006.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC)pipes having thermal
stability cold water supply including all
CPVC plain & brass threaded fittings This
includes jointing of pipes & fittings with one
200 73 step CPVC solvent cement & testing of 0 0.00 0.00 0.00
joints complete as per direction of Engineer
Make:SUPREME/ASHRIVAD.
Supplying all materials, labour, T&P, fitting
& fixing of different size bourden type
pressure gauge(16 kg/cm2). including cost,
202 75 conveyance & taxes of all materials, T&P 0 0.00 0.00 0.00
etc. all complete as per P.H. specification
and as per the direction of the Engineer-in-
Providing and fixing C.I. double acting air
valve of approved quality with bolts, nuts,
204 77 rubber insertions etc. complete (The tail 0 0.00 0.00 0.00
pieces, tapers etc if required will be paid
Supply installation, Testing &
Commissioning of Horizontal Multi Stage
Monoblock Centrifugal pumps with CI with
CED Coated Suction & Discharge Casing, SS
Intermediate Casing. Pump shoule come
with 380-415V, 50Hz, 2 Pole, IP 55
Enclosure Class, Class F insulated 0.6 KW
(0.8 HP) Motor.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Pump controller suitable for 2 Pumps
(1W+1S) with LCD screen displays, phase
loss protection (incoiming as well as for
outgoing), Individual pump overload
protection, individual pump under voltage
protection, dryrunning protection without
installing any float switch, memory function
207 80 when power off and during recovery, visual 0 0.00 0.00 0.00
and audio alarm for fault prompt, auto
manual switch and pump should operate
based on the sump water level and both
pump should run together for high level.
Panel should come with 3 Nos Float switch
to work as per the OHT water level.Make-
Grundfos/armstrong/Franklin/Wilo
Per Pump Flow Rate-5 M3/hr (1W+1S),Head-
20KLD DRINKING WATER UGR TANK AND
Earth work in excavation by mechanical
means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5
m in width as well as 10 sqm on plan)
including getting out and disposal of
excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
215 88 exceeding 15cm in depth: consolidating CUM 37.70 130.86 4,933.82
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
216 89 agregate 40mm nominal size) as levelling CUM 3.01 4885.67 14,686.33
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Brick work with non modular fly ash lime
bricks (FALG Bricks) conforming to
217 90 IS:12894, class designation 10 average 0 0.00 0.00 0.00
compressive strength in super structure
above plinth level up to floor V level in :
Cement mortar 1:6 (1 cement : 6 Coarse
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
219 92 compaction concrete by using vibrators, 0 0.00 0.00 0.00
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
220 93 position.
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and applying two component high
performance polymer modifed cementitious
waterproofing coating, Dr.Fixit Fastflex of
Pidilite or approved equivalent having
minimum elongation of 120% , shore A
hardness of 60 as per ASTM D 2240 and
food grade certification by CFTRI applied
@2Kg/sqm in two coats, including
reinforcing the coating with 45gsm glass
fibre mesh between the coats at all corners
and change in directions. The coating shall
be applied on the entire horizontal and
300mm above the FFL on the vertical
surface as per manufacturer's
226 99 recommendation. The system includes base SQM 69.00 601.80 41,524.20
preparation of cleaning, brushing and
removal of flacky materials, grouting the
porous area with cementitious grout,
sealing the minor cracks, proper coving
between slab and wall junctions and pre-
wetting the surface to attain SSD condition
before application of the waterproofing
coating, followed by the application of
waterproof coating. The waterproofing
system should be applied directly by the
manufacturer with 10 years of insurance
backed system warranty against leakage.
Mode of measurement will be actual area
12mm thick cement plaster (1 : 4) over
227 100 brick work with cement punning . in Ground SQM 73.50 194.23 14,275.76
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
228 101 cement : 6 fine sand) including necessary SQM 25.65 244.97 6,283.43
scaffolding, curing etc. all complete at all
floors and all heights.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
229 102 cement : 6 fine sand) including necessary SQM 30.05 171.45 5,151.76
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
230 103 cement mortar of mix 1:4 (1 cement : 4 SQM 12.25 188.80 2,312.80
coarse sand) including necessary
scaffolding, curing etc. all complete at all
floors and all heights.
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
231 104 cost,conveyance of all materials ,priming kg 92.93 141.60 13,158.18
,and labour for fitting fixing etc.complete as
per the instruction of Engineer-in-Charge
Supplying and fixing 900mm dia SFRC cover
without frame for manhole including cost of
all materials, T&P, labour etc complete as
per direction of Engineer-in-charge.
M.S Panneled Door single leaf shutter with
233 106 M.S frame including frame made out of M.S kg 42.53 141.60 6,021.54
angle and panel shutter with C.R sheet
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing & Applying priming coat with
Cement primer of approved brand and
234 107 manufacture on plaster surface as per the sqm 67.95 71.98 4,890.86
instruction of Engineer-In-Charge at all
elevations including all material & labour
Providing and applying to outside walls with
two or more coats of Anti-Fungal Weather
coat water proofing paint including
scaffolding and cleaning the surface before
application of approved colour and
manufacture as per specification, instruction
of Engineer-In-Charge at all elevations
including all material labour complete.
Preparing surface and painting at all height
with two or more coats of interior Plastic
Emulsion "Royale Shyne" of Asian Paints or
equivalent of approved shade as per the
instructions of the manufacturers; giving
236 109 uniform shade etc in all heights of walls sqm 37.90 96.05 3,640.37
etc. including interior wall primer &
providing scaffolding, cleaning, curing and
supply of all materials and labour complete
as per drawing, design and direction of
Architect/Engineer-In-Charge.
Providing & Painting with synthetic enamel
paint of approved brand Asian / Berger
make (Apex Ultima quality) and
237 110 manufacture on concrete /Steel work (Grill sqm 2.21 168.98 373.86
and Gate) as per the instruction of Engineer-
In-Charge at all elevations including all
material & labour complete.
2.5 cm thick grading concrete (1:2:2) on
238 111 roof slab with 6.7mm & down grades size sqm 23.25 352.23 8,189.35
hard granite crusher broken chips
239 112 CIVIL WORKS OF 20KLD SEPTIC TANK 0 0.00 0.00 0.00
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
240 113 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
243 116 exceeding 15cm in depth: consolidating CUM 1.47 130.86 192.04
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling in plinth with sand
244 117 under floors, including watering, ramming, CUM 3.18 601.33 1,912.00
consolidating and dressing complete.
1:4:8 (1 Cement : 4 coarse sand (zone-III)
derived from natural sources : 8 graded
stone aggregate 40 mm nominal size
derived from natural sources)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
246 119 compaction concrete by using vibrators, 0 0.00 0.00 0.00
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
247 120 position.
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and applying two component high
performance polymer modifed cementitious
waterproofing coating, Dr.Fixit Fastflex of
Pidilite or approved equivalent having
minimum elongation of 120% , shore A
hardness of 60 as per ASTM D 2240 and
food grade certification by CFTRI applied
@2Kg/sqm in two coats, including
reinforcing the coating with 45gsm glass
fibre mesh between the coats at all corners
and change in directions. The coating shall
be applied on the entire horizontal and
300mm above the FFL on the vertical
surface as per manufacturer's
recommendation. The system includes base
preparation of cleaning, brushing and
removal of flacky materials, grouting the
porous area with cementitious grout,
sealing the minor cracks, proper coving
between slab and wall junctions and pre-
wetting the surface to attain SSD condition
before application of the waterproofing
coating, followed by the application of
waterproof coating. The waterproofing
system should be applied directly by the
manufacturer with 10 years of insurance
backed system warranty against leakage.
Mode of measurement will be actual area
252 125 treated
12 mm cement plaster of mix : 0 0.00 0.00 0.00
254 127 Neat cement punning. SQM 66.94 80.00 5,355.47
Supplying and fixing 900mm dia SFRC cover
without frame for manhole including cost of
all materials, T&P, labour etc complete as
per direction of Engineer-in-charge.
2.5 cm thick grading concrete (1:2:2) on
256 129 roof slab with 6.7mm & down grades size sqm 22.87 352.23 8,055.50
hard granite crusher broken chips
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
258 131 plan), including dressing of sides and cum 4.31 235.53 1,016.20
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Supplying and filling in plinth with sand
259 132 under floors, including watering, ramming, cum 0.40 601.33 240.97
consolidating and dressing complete.
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
260 133 agregate 40mm nominal size) as levelling cum 0.40 4885.67 1,957.85
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Brick work with non modular fly ash bricks
conforming to IS:12894, class designation
261 134 10 average compressive strength in super 0 0.00 0.00 0.00
structure above plinth level up to floor V
Cement mortar 1:6 (1 cement : 6 coarse
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
263 136 compaction concrete by using vibrators, 0 0.00 0.00 0.00
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
264 137 position.
cover Slab cum 0.14 6068.50 872.60
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
well sink with top and bottom cover of min
50 mm thk with cementing Khoa filling etc
INSPECTION CHAMBER (750X750X750) MM
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
268 141 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
270 143 exceeding 15cm in depth: consolidating CUM 15.39 130.86 2,013.84
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
271 144 consolidating and dressing, labours, tools, CUM 1.54 601.33 923.64
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
272 145 agregate 40mm nominal size) as levelling CUM 1.54 4885.67 7,504.39
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
273 146 compaction concrete by using vibrators, 0 0.00 0.00 0.00
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
274 147 position.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
278 151 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
280 153 Neat cement punning. SQM 12.00 27.38 328.51
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B
hard granite chips with cost of all labour &
other materials etc complete.
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
283 156 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
285 158 exceeding 15cm in depth: consolidating CUM 2.68 130.86 350.10
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
286 159 consolidating and dressing, labours, tools, CUM 0.73 601.33 436.56
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
287 160 agregate 40mm nominal size) as levelling CUM 0.73 4885.67 3,547.00
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
288 161 compaction concrete by using vibrators, 0 0.00 0.00 0.00
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
289 162 position.
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
293 166 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
295 168 Neat cement punning. SQM 6.00 27.38 164.26
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B
hard granite chips with cost of all labour &
other materials etc complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
construction man hole chamber of the
following size with cement concrete(1:3:6)
using 40mm size hard granite metal on bed,
1st class Fly ash brickwork in cement
mortar(1:6), moulding and shaping the
channel inside and benching with cement
concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing
(1:3) to outside, R.C.C cover slab in
(1:1½:3) using 12mm size h.g chips with
RCPC man hole cover, earthwork in
excavation in all kinds of soil and refilling
the cavity around the chamber including
watering, curing, conveyance of all
materials to worksite, payment of royalty,
taxes etc all complete as per approved
specification and direction of the Engineer in
299 172 SEWERAGE PIPE LINE TRENCH NOS 4.00 17419.16 69,676.64
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
300 173 plan), including dressing of sides and cum 31.50 235.53 7,419.13
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Providing and laying in position cement
concrete of specified grade excluding the
cost of centering and shuttering - All work
up to plinth level :
1:3:6 (1 Cement : 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size)
Supplying and filling sand in foundation and
over areas including watering, ramming,
303 176 consolidating and dressing, labours, tools, 0 0.00 0.00 0.00
taxes etc. all complete as per the
specification and direction of Engineer-In-
304 177 Sand filling in drain trench cum 2.70 601.33 1,623.59
Supplying and filling in for CC lining 75 mm
all arround on PVC pipes and base along
305 178 with Jamuna sand under floors, including cum 3.33 884.17 2,947.08
watering, ramming, consolidating and
dressing complete.
306 0 Sub-Total of Plumbing Works 0 0.00 0.00 34,01,327.49
307 0 Electrical Works 0 0.00 0.00 0.00
308 1 INTERNAL ELECTRICAL WORK 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make-
Finolex/Anchor/Polycab/HAVELLS/RR
KABLE/KEI or equievalant reputed make A
catagory ISI marked as approved with 20 mm
dia PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Havells or
equievalant reputed make A catagory ISI
marked as approved 6A modular type (anti
bactorial & flame retradant type) switch ISI
marked Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
as approved, and ceiling rose ISI marked
309 2 Make- Anchor/Havells of modular type G.I box 0 0.00 0.00 0.00
with metallic cover plate (both side) (anti
bactorial & flame retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved of suitable size, modular box with
1.5 sq. Mm FRLSH PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
AS FOLLOWS ,complete suitable for IPH
standard hospital. All the switches & sockets
should be warrantied for a replacement period
of 2 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type ISI
marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular
type((anti bactorial & falme retradant type))
switch ISI marked Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
313 6 make & model A catagory ISI marked as Nos 15.00 1211.86 18,177.90
approved, and ceiling rose ISI marked Make-
Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side)(anti bactorial &
falme retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
AS FOLLOWS ,complete suitable for IPH
Supplying ,fixing of 6A Plug on the same board
in existing switch board with complete fitting
by 01 no of 6A switch & socket (modular type)(
(anti bactorial & flame retradant type)) & other
required accessories of ISI marked as approved
as per direction of Engg. -in -Charge. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 2 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti bactorial
& flame retradant type)) with suitable size
modular box & cover(anti bactorial & falme
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
make & model ISI marked as approved ,
complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a period of 10 years against
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of 1x16A Plug on the separate
board with complete fitting by 01 no of 16A
switch & socket(modular type)((anti bactorial
& flame retradant type)) with suitable size
modular box & cover(anti bactorial & falme
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-charge..
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make A catagory ISI marked as approved, (For
equipement power)All the switches & sockets
should be warrantied for a replacement period
of 10 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 2x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+2 no 6A switch & socket(modular type)
( (anti bactorial & falme retradant type) with
suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision)or equievalant
reputed make & model A catagory ISI marked
as approved, (For equipement power)complete
suitable for IPH standard hospital.(Maximum
02 nos point in one circuit).All the switches &
sockets should be warrantied for a replacement
period of 10 years against defects with
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of 3x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+3 nos 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision)or equievalant
reputed make & model A catagory ISI marked
as approved, (For equipement power)complete
suitable for IPH standard hospital.(Maximum
02 nos point in one circuit).All the switches &
sockets should be warrantied for a replacement
period of 10 years against defects with
ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR
KEBLE) or equievalant reputed make A
catagory ISI marked as approved, in recessed
PVC conduit Heavy duty FRLS of mentioned
size (AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
321 14 conductor in 20 mm dia non metallic heavy Mtr 299.00 171.10 51,158.90
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
324 17 conductor in 32 mm dia non metallic heavy Mtr 344.00 289.10 99,450.40
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR PANEL
TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core 10
sq. mm copper wire for earth continuty
conductor in 40 mm dia non metallic heavy
duty flexible conduit.(FLOOR PANEL TO TPN
BDB power) (4X16+2X10)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with chained
metal cover for the socket outlet, and complete
with connections, testing and commissioning
etc. as required as per direction of Engg.-in-
Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A catagory
ISI marked as approved,All the Components
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing 32 amps, 415 volts, TPN,
industrial type socket outlet, with 4 pole and
earth metal enclosed plug top along with 32
amps. C-series, TP MCB, in sheet steel
enclosure, on surface or in recess, with chained
metal cover for the socket outlet, and complete
with connections, testing and commissioning
etc. as required as per direction of Engg.-in-
Charge.. . Equievalant higher model of Make-
Legrand/Schneider/Siemens/panasonic
equievalant reputed make & model A catagory
ISI marked as approved.All the Components
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side)(anti bactorial type)
plate for modular switches in recess etc as
required as per direction of Engg.-in-Charge.
MAKE-Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
331 24 model A catagory ISI marked as approved .All 0 0.00 0.00 0.00
the Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
same in case of recessed conduit as required as
per direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant reputed
make A catagory ISI marked as approved
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved as required as
per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular
339 32 coveras required as per direction of Engg.-in- Nos 24.00 730.42 17,530.08
Charge .All the Components should be
warrantied for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved .as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked conforming
to IS-1258/1987 in place of ceiling rose as per
direction of Engg.-in-Charge .All the
341 34 Components should be warrantied for a EACH 12.00 71.98 863.76
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant type))
in existing switch box(anti bactorial & flame
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
342 35 Arteor) /Panasonic (vision), complete suitable Nos 16.00 49.56 792.96
for IPH standard hospital.It should be
warrantied for a period of 10 years against
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
343 36 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of heavy
duty 300 mm sweep (Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
344 37 equievalant reputed make & model A catagory Nos 15.00 3683.96 55,259.40
ISI marked as approved ) of exhaust fan in the
existing wall, including fixing & conntection as
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Supplying, installation, of exhaust fan of heavy
duty 380 mm sweep 1400 rpm with louvers
Make-Equievalant higher model with 5 star
Havells/almonard/Anchor/Panasonic/Usha or
equievalant reputed make & model A catagory
ISI marked as approved ) of exhaust fan in the
existing wall, including fixing & conntection .as
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
equievalant reputed make & model A catagory
346 39 ISI marked as approved ) including wiring the Nos 20.00 2607.80 52,156.00
down rod of standard length (upto 30 cm) with
1.5 sq mm PVC insulated, copper conductor,
single core cable etc. as required.(With fan
Regulator) as required as per direction of Engg.-
in-Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Ushaor
equievalant reputed make & model A catagory
ISI marked as approved ) including wiring the
down rod of standard length (upto 30 cm) with
1.5 sq mm PVC insulated, copper conductor,
single core cable etc. as required as per
direction of Engg.-in-Charge,Replacement
Warranty will be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy efficient
Recess mounted LED luminaire made up of
CRCA powder coated sheet steel housing of
225 X 225 mm x 35 mm size with of not more
than 25W and system lumens output not less
than 3250 lumens (130 lm/ wt) with diffusers
for better light transmission and pure effect
with High luminous flux LEDs for better light
output, CRI not less than 80, CCT of 5700-6500
degree K, THD less than 10%,internal surge
protection of 3 KV, complete with Non
348 41 integrated isolated electronic driver (protects No 66.00 3158.86 2,08,484.76
the output /secondary side from any
disturbance on the input / primary side
ensuring safe operation)and all other
accessories suitable for operation on140- 270
V, 50 Hz ,L70 @50,000 burning hrs (5 years
warranty)supply .as required as per direction
of Engg.-in-Charge (Make:
Panasonic/LT/Trilux /Philips/Wipro or
equievalant reputed make & model A catagory
ISI marked as approved.) . The luminaire must
be Replacement Warranty will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 20 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
349 42 less than 10%, with electronic driver, internal Nos 50.00 1791.24 89,562.00
surge protection of 2.5 KV , L70 B50: 30000 hrs
(2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-in-
Charge. ( Make : Panasonic
/Trilux/Osram/PHILIPS/Wipro or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
130 lumens/watt ) of size 595 x595 x 70 mm ,
,CRI not less than 80,CCT of 5700-6500 degree
K,THD less than 10%, with Non integrated
isolated driver (protects the output
350 43 /secondary side from any disturbance on the Nos 20.00 2865.04 57,300.80
input / primary side ensuring safe operation),
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. ( Make :
Panasonic / LT /Wipro/PHILIPS or
equievalant reputed make & model A catagory
ISI marked as approved.) The luminaire should
be Replacement Warranty will be 5 years.
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
other accessories with diffuser having 5 years
warranty i/c connection etc as required as per
direction of Engg.-in-Charge. (Similar to
Panasonic/PHILIPS/LT/wipro or equievalant
reputed make & model A catagory ISI marked
as approved.). The luminaire should be
Replacement Warranty will be 5 years .
SITC of Sleek LED 10 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including
connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core
cable and earthing etc. as required as per
direction of Engg.-in-Charge.
( Make : WIPRO / PHILIPS/Panasonic or
equievalant reputed make & model A
catagory ISI marked as approved. )The
luminaire should be Replacement Warranty
will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K
with 12 w/mtr @ 5Mtr pool with Driver extra
as required as per direction of Engg.-in-Charge
( Make : Panasonic PHILIPS/Wipro or
equievalant reputed make & model A catagory
ISI marked as approved. )The luminaire should
be Replacement Warranty will be 5 years
Supplying and fixing of small focus light for
small monuments as 30W , 5700 K required as
per direction of Engg.-in-Charge Make :
354 47 Panasonic/PHILIPS/LT/WIPRO or equievalant Nos 12.00 3307.54 39,690.48
reputed make & model A catagory ISI marked
as approved.)The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy gauge
including painting etc. as requiredas required
355 48 as per direction of Engg.-in-Charge . Nos 122.00 38.94 4,750.68
(Note : More than 5 cm length shall be rounded
to the nearest 10 cm and 5 cm or less shall be
ignored)of ISI mark as approved.
356 49 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall be
fabricated to withstand IK09,the DB should be
properly pre-treated with 7 tank process and
duly powder coated, phosphatized with
powder coated finish, on surface/recess,
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved. as per direction of Engg.-in-
Charge. The Distribution boards should be
Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral
358 51 Bus bar, Earth Bar & Cable ties for cable Nos 4.00 2558.24 10,232.96
management, prefitted masking sheet, IP43-
IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD) Warranty on DB
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing of 12 way DD single pole and
neutral sheet steel MCB distribution board
250V on surface/recess complete with tinned
copper bus bar, neutral bus bar, earth bar, din
bar, detachable gland plate, interconnections,
phosphatized and powder painted including
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
door)(only each EM. CONNECTION UPS LOAD)
8 Way(8+24) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral
Bus bar, Earth Bar & Cable ties for cable
management, prefitted masking sheet, IP43-
IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD)
Supplying and fixing 20 amps rating, 240 volts,
C series, Double poles MCB of Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
362 55 as approved in the existing MCB DB complete Nos 2.00 392.94 785.88
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 6 amps to 32 amps rating,
240 volts, C series, single poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
363 56 as approved. the existing MCB DB complete Nos 212.00 155.76 33,021.12
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years.MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 40 Amps rating, TPN, 415
volts, RCCB,300mA .Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
364 57 approved in the existing MCB DB complete Nos 10.00 2650.28 26,502.80
with connections, testing and commissioning
etc. as required as per direction of Engg.-in-
Charge. .(4W TPN BDB IC)AC ODU
CONTROLLER). The RCCB should be
Replacement Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
367 60 make & model A catagory ISI marked as Nos 10.00 2619.60 26,196.00
approved in the existing MCB DB in the existing
MCB DB complete with connections as per
direction of Engg.-in-Charge.The RCCB should
be Replacement Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
368 61 approved in the existing MCB DB in the Nos 5.00 3116.38 15,581.90
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB
should be Replacement Warranty will be 5
369 62 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C Of Earthing with copper earth plate 600
mm x 600mm x 6 mm thick ISI marked
including accessories and providing masonary
with cover plate having loccking arrangement
and watering pipe etc (WITH charcoal and
salt) as required as per direction of Engg.-in-
Charge. The entire earthing system should be
Replacement Warranty will be 5 years
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
burnt wood charcoal, salt, foreign soil, water
371 64 pouring arrangements, brick masonary Nos 2.00 2954.72 5,909.44
enclosure on top with removable RCC cover
complete with labour for excavation of pit in all
kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 4 mm dia copper wire on
372 65 surface or in recess for loop earthing as Mtr 200.00 113.28 22,656.00
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
373 66 strip on surface or in recess for connections etc. Mtr 15.00 1293.28 19,399.20
as required as per direction of Engg.-in-Charge.
Providing and fixing 50mm x 5 mm copper
374 67 strip on surface or in recess for connections etc. Mtr 10.00 2394.22 23,942.20
as required as per direction of Engg.-in-Charge.
Supplying and making brick massonary
pedastal with extra super structure including
cement plastering etc as required as per
direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
377 70 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
380 73 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
3.5core x 95 sq mm ( FOR FDB 1F,2F, POWER )
4core x 16 sq mm (FDB LIGHT 1 RUN UPTO 1F
383 76 4 core x 4 sq mm (for small power) Mtr 19.00 103.69 1,970.05
3.5core x 35 sq mm (To FDB LIGHT / power
384 77 BDB/UPS PANEL,separate panel for OT Mtr 20.00 257.72 5,154.48
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM direct in ground in the trench in
386 79 one horizental formation including excavation Mtr 20.00 153.40 3,068.00
,sand coushing protection covering and refilling
the trench etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
SQ. MM but not exceeding 120 SQ. MM direct in
387 80 ground in the trench in one horizental Mtr 88.00 171.10 15,056.80
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
120 SQ. MM but not exceeding 400 SQ. MM
388 81 direct in ground in the trench in one horizental Mtr 67.00 189.98 12,728.66
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
389 82 25 SQ. MM direct in ground in the EXISTING Mtr 28.00 49.56 1,387.68
PIPE etc as required as per direction of Engg.-in
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
390 83 SQ. MM but not exceeding 400 SQ. MM direct in Mtr 32.00 68.44 2,190.08
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM in open duct etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
392 85 SQ. MM in open duct 400 SQ. MM direct in Mtr 20.00 54.28 1,085.60
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
393 86 25 SQ. MM in surface with shaddle and screw Mtr 26.00 95.58 2,485.08
etc as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
394 87 120 SQ. MM From 25 SQ. MM in surface with Mtr 20.00 151.04 3,020.80
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
395 88 400 SQ. MM From 120 SQ. MM in surface with Mtr 8.00 154.58 1,236.64
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of following dia G.I.
pipe (medium class) in ground complete with
G.I fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
with fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
406 99 MAIN CONTROL PANEL AT GF 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm
CRCA steel sheet duly derusted & painted by
siemens gray powder cote paint is designed as
407 100 G.A drawing as per direction of Engg.-in- Set 1.00 327944.42 3,27,944.42
Charge.Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be submitted
along with panel board including component
In commer-1-01 number of 630A(400-630) 4P
Icu=100%Ics,0, LSIG MCCB with micro
processor based release Electrical locking for
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(HVAC & MEDICAL
EQUIPEMENT)(200 KVA TRANSFORMER)
In commer-2-01 number of 250A 4P
Icu=100%Ics, 0 LSIG MCCB with micro
processor based release with adjustable
overload from 36%-100% & Electrical locking
for normal & DG (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked) along with 01 no of 200A 4P onload
changeover switch (125 KVA DG 01 NO)
Busbar-1&2 04 numbers of 500Amps
Aluminium busbar with 1A/SQ.MM current
410 103 carring capacity. busbar duly sleeved by color 0 0.00 0.00 0.00
coated PVC sleeve & supported by suitable size
DMC insulator. (for outgoing)
Out going- 08 numbers of 63A 4P MCB (make-
Legrand or equivalent reputed make ISI
marked)BDB P/AC,(timer panel & water supply
management,,FIRE,WTP,STP & GF POWER)
Out going- 5 numbers of 125A 4P Icu=50%Ics,
LSIG MCCB withTMR based release with
adjustable overload (make-
LEGRAND/Schneider/ABB/Siemens, ISI
marked)(FLOOR RAW POWER PANEL
,SPARE,DG PANEL OF OT COMPLEX & CT,AC )
Out going- 6 numbers of 32A 4P MCB ((make-
413 106 ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI 0 0.00 0.00 0.00
marked)(LIGHT SUPPLY)
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 02 set of digital type multifunction meter
with CT for voltage,current,frequency,PF,THD
indication with RS 485 COMPACTIVITY FOR
416 109 (iii) 4 nos of 65kA SP VSD WITH 32A SP MCB 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm
CRCA steel sheet duly derusted & painted by
simens grey powder cote paint is designed as
G.A drawing. (FOR ALL MAIN CONNECTED
LOAD) BUILDING LIGHT)as per direction of
Engg.-in-Charge. Warrentee period of
replacement of panel & accessories must be 5
years & compelete test certificate must be
submitted along with panel board including
component list.
In commer- 01 no 63A 4P MCB 10kA,C series
with on/off trip indication Light load for each
floor. ( Make-LEGRAND-Ekinox3 DB/ Siemens-
419 112 Betaguard/ Schneider- Acti 9/L&T 0 0.00 0.00 0.00
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or equievalant
make with proper model ISI marked)
Busbar- 04 numbers of 63Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by suitable
size DMC insulator.
Out going- 06 nos 32A 2P MCB 10kA,C series
UPS Light load for each area UBDB. ( Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
421 114 Schneider- Acti 9/L&T (Equievalant 0 0.00 0.00 0.00
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps Ammeter with
423 116 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
(iii) 01 set of 0-500 voltmeter
424 117 .(DIGITAL)(Sicure/L&T or equievalant make & 0 0.00 0.00 0.00
425 118 FDB RAW POWER AT 1FSUPPLY 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm
CRCA steel sheet duly derusted & painted by
simens grey powder cote paint is designed as
G.A drawing. (FOR ALL MAIN CONNECTED
LOAD) BUILDING POWER/AC)as per direction
of Engg.-in-Charge. Warrentee period of
replacement of panel & accessories must be 5
years & compelete test certificate must be
submitted along with panel board including
component list.
In commer- 01 no 125A 4P MCCB 25kA, with
ROM & S. Link. (make-
427 120 ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI 0 0.00 0.00 0.00
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS or equievalant make.
Busbar- 04 numbers of 125Amps,50kA
Electrolytic copper busbar duly sleeved by
color coded PVC sleeve & supported by suitable
size DMC insulator.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Out going- 04 nos 63A 4P MCB 10kA,C series
for power BDB. ( Make-LEGRAND-Ekinox3 DB/
Siemens-Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model)or equievalant
make with proper model ISI marked)
Out going- 02 nos 32A 4P MCB 10kA,C series
forExtra power BDB. ( Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
430 123 Acti 9/L&T (Equievalant 0 0.00 0.00 0.00
model)/Panasonic(Equivalant model)
/ABB(Equivalant model)or equievalant make
with proper model ISI marked)
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of MFM with
432 125 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
UPS PANEL FOR EMERGENCY(COMMON &
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm
CRCA steel sheet duly derusted & painted by
simens grey powder cote paint is designed as
G.A drawing. (FOR ALL MAIN CONNECTED
LOAD) BUILDING EMERGENCY LIGHT)as per
direction of Engg.-in-Charge. Warrentee period
of replacement of panel & accessories must be
5 years & compelete test certificate must be
submitted along with panel board including
component list.
In commer- 01 numbers of 63 Amps 4P
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=50% Isc) with shunt trip &
axulary for BMS & mechnical inter locking for
one incommer source to other.
Busbar- 04 numbers of 100Amps Electrolytic
copper busbar duly sleeved by color coded PVC
sleeve & supported by suitable size DMC
Out going- 04 nos 32A 2P MCB UPS Light load
for each floor.
Out going- 03 nos 32A 4P MCB OT/ICU
POWER/OT MACHINE OR Bed head panel
Instrument- (i) 03 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ammeter Digital type
& CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter Digital
NB- This panel should have proper earth by
suitable rated copper flat.
443 136 UPS SYSTEM(Emergency & COMMON AREA) 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply ,installation ,testing & commissioning of
10KVA UPS SYSTEM WITH suitable size
battery bank, rated of battery , IGBT based
inverter system with inbuilt isolation
transformer & automatic phase sicuency
corrector of 3ph in put to 3 ph
output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model of Numeric/ RELLIO/
Emersion or equievalant reputed make A
catogory, ISI marked as approved ) including
supply of rack inverter stand with sufficient
backup upto 30 minutes with all required
accessories to complete the job including all
connection.LOAD OF EMERGENCY) as per
direction of Engg.-in-Charge. Warrentee period
of all accessories & component & system must
be 2 years & compelete test certificate must be
submitted along with ups including
component list & SLD.
CABLE TRAY /RACE WAY FOR DISTRIBUTION
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand - Cablofil
make or equievalant reputed make & model A
catogory, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
446 139 minimum of 104.8Kg/meter at the span of mtrs 20.00 702.10 14,042.00
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of Legrand - Cablofil
make or equievalant reputed make & model A
catogory, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
447 140 minimum of 104.8Kg/meter at the span of mtrs 14.00 814.20 11,398.80
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of Legrand - Cablofil
make or equievalant reputed make & model A
catogory, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
448 141 minimum of 104.8Kg/meter at the span of mtrs 12.00 1077.34 12,928.08
1.5Meter as per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
GALVANIZED(GC) AS PER EN-ISO-1461 ,
FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 38mm(H) x
225mm(W), of reputed make ISI marked as
approved .(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge.(3 COMPARTMENT TOTAL 54
MM HEIGHT,COST WITHOUT GST,WITH LESS
DISCOUNT(REPUTED FACTORY MADE ISI
450 143 LIGHTENING PROTECTION SYSTEM 0 0.00 0.00 0.00
451 144 (LIGHTENING CONDUCTOR) 0 0.00 0.00 0.00
AIR TERMINAL & ACCESSORRIES LIGHTNING
ARRESTER+ MAST:
Providing and fixing of lightning conductor
finial made of 25 mm dia 300 mm long, G.I
tube,having single prong at top, with 85 mm dia
3 mm thick G.I base plate including holes etc
complete as required with as per direction of
Engg.-in-Charge.(RATE REFERING OSR 2018
SOR NO-4.2) .The entire LA system should be
Replacement Warranty will be 5 years
Reveting, sweating and soldering of copper /
G.I. tape ( with another copper / G.I. tape, base
of the finial or any other metallic object) as
453 146 required .as per direction of Engg.-in-Charge. mtrs 23.00 166.38 3,826.74
(RATE REFERING OSR 2018 SOR NO-4.4) The
entire LA system should be Replacement
Warranty will be 5 years
Providing and fixing of G.I. tape 20 mm x 3 mm
thick on parapet or surface of wall for lightning
conductor complete as required. (For
454 147 horizontal run) as per direction of Engg.-in- mtrs 23.00 69.62 1,601.26
Charge.(RATE REFERING OSR 2018 SOR NO-
4.7) The entire LA system should be
Replacement Warranty will be 5 years
Providing and fixing of G.I. tape 20 mm x 3 mm
thick on parapet or surface of wall for lightning
conductor complete as required. (For virtical
455 148 run) as per direction of Engg.-in-Charge. (RATE mtrs 23.00 114.46 2,632.58
REFERING OSR 2018 SOR NO-4.8) The entire
LA system should be Replacement Warranty
will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing of testing joint, made of 20
mm x 3 mm thick G.I. strip, 125 long with 4 nos
of G.I. bolts, check nuts and spring washer etc
456 149 complete as required as per direction of Engg.- Each 16.00 74.34 1,189.44
in-Charge. (RATE REFERING OSR 2018 SOR NO-
4.12) The entire LA system should be
Replacement Warranty will be 5 years
Providing and laying of G.I. tape 32 mm x 6 mm
from earth electrode directly in ground as
required as per direction of Engg.-in-Charge.
.(RATE REFERING OSR 2018 SOR NO-4.14) The
entire LA system should be Replacement
Warranty will be 5 years
Maintenance free Safe Earthing Electrodes
with ISI G.I. pipe dia 75mm as Secondary
electrode with wall thickness of 2.6 mm and
the Primary Earthing Electrode will be 50mm X
6mm X 1no M.S. hot dipped galvanized strip
filled with a highly conductive & non-corrosive
compound in between the Primary Earthing
and the secondary Earthing, the Surface Area in
will be 7,06,500sqmm for 3mtrs length and
Cross Sectional Primary conducting area is 300
458 151 sq.mm. An Solid G.I. Base plat seals the unit at SET 2.00 16531.80 33,063.60
the bottom. as per direction of Engg.-in-
Charge. (MES-GFC ground Filling compound
will be provided in 25 kgs Bags.)(MES-GFC
ground Filling compound will be provided in
25 kgs Bags.)(2 bags required for each earthing
electrode.)(FOR lightening protection &
Building Electrification).The entire earthing
system should be Replacement Warranty will
be 5 years.Make-OBO/Star-x/ABB or
equievalant reputed make & model A catogory.
459 152 DATA ,TELEPHONE & CCTV 0 0.00 0.00 0.00
Supply,installation, testing and commissioning
460 153 of 4 P&T & 14 Extensions Hybrid EPABX Set 1.00 15930.00 15,930.00
Supply,installation, testing and commissioning
461 154 of RJ11 Modular Complete in concealed manner Set 10.00 531.00 5,310.00
including termination of cable
Supply & Laying of 2 Core 0.5mm telephone
462 155 cable using Rigid PVC Pipe in concealed Rmt 522.00 76.70 40,037.40
manner per running metre of cable laid.
Supply,installation, testing and commissioning
463 156 of Electronic Push Button Telephone with Nos 10.00 826.00 8,260.00
Supply,installation, testing and commissioning
of GSM FCT Terminal
Supply,installation, testing and commissioning
of Lightening Protector for P&T Lines
Supply,installation, testing and commissioning
of 12v 7 Ah Battery including termination
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,installation, testing and commissioning
468 161 of RJ45 Modular Complete in concealed manner Set 10.00 1602.44 16,024.40
including termination of cable
Supply & Laying of Cat 6 cable using Rigid PVC
469 162 Pipe in concealed manner per running metre of Rmt 544.00 67.26 36,589.44
Supply,installation, testing and commissioning
470 163 of Patch Panel, 6U Rack, Cable Manager, Cooling Set 2.00 7786.82 15,573.64
Fan x 2 Nos., Earthing Kit, Power Manager
Supply,installation, testing and
commissionining of 1 Mtr Patch Cord
Supply,installation, testing and
commissionining of 3 Mtr Patch Cord
Supply,installation, testing and commissioning
of 10 Channel DVR with 2 Sata Ports
Supply,installation, testing and commissioning
475 168 of 4 MP Dome / Bullet Camera with 25 Mtrs IR Nos 20.00 18644.00 3,72,880.00
Supply & Laying of RG59+ 3 Core cable using
476 169 Rigid PVC Pipe in concealed manner per Rmt 422.00 128.62 54,277.64
running metre of cable laid.
Supply,installation, testing and commissioning
of BNC & DC Connectors
Supply,installation, testing and
478 171 commissionining of 4 TB CCTV Surveillance Nos 1.00 15104.00 15,104.00
Supply,installation, testing and
commissionining of 10 Amps Power Supply
Supply,installation, testing and commissioning
of Smart 32" LED Monitor
Supply,installation, testing and commissioning
of 10 Mtrs HDMI Cable
Supply,installation, testing and commissioning
Supply,installation, testing and commissioning
of Wireless Mouse
33 0 Sub-Total of Electrical Works 0 0.00 0.00 46,94,415.92
45 0 Firefighting Works 0 0.00 0.00 0.00
46 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to IS: 2878
made from ISI marked seamless cylinder confirming to
IS: 7285, fitted with ISI marked controlled valve
confirming to IS: 3224, high pressure 1mtr discharge
47 2 hose & horn complete with initial gas charged with Nos 26.00 14309.86 3,72,056.36
carrying handle & wall mounting bracket as per
direction of Engineer-in-charge. (Make:CS-
FIRE/SUNMAX/CANEXE or equievalant )
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and commissioning of
Mechanical Foam type 9 litre capacity Fire
Extinguisher, ISI marked, IS: 10204, containing 540 ml
AFFF liquid ISI marked, IS: 4989 Part II and a
polyurethane coated CO2 Gas Cartridge, ISI marked,
IS: 4947 complete with gunmetal union cap, nylon hose
with plastic foam making branch and wall mounting
bracket as per direction of Engineer-in-charge.
55 0 Sub-Total of Firefighting Works 0 0.00 0.00 3,84,066.40
67 Grand Total 3,12,56,331.86
67 Grand Total 3,12,56,331.86
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SAM 003 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sambalpur Training Hub at DHH.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .