Improvement work of toilet and water supply arrangements in the town and North Sub Division office in first floor of old SS control room building 110 3311 KV at Somanur SS

Amount

PCC 1:3:6, using 20mm HBG metal for flooring including cost of materials, lead, lift, labour charges, etc., complete.

Brick work in CM 1:4 using Fly ash Bricks of size 23x11x7.5cm with minimum compressive strength of 75kg/cm² for trench wall as directed by the Engineer in charge including cost of all materials, abour charges, curing, lead, lift, T&P, etc., complete.

Ceiling Plastering in CM 1:3, 12mm thick for RCC surface including the cost of all material, scaffolding charges, cement, labour charges, scafolding charges, all leads, lifts, as per standard specification.

Plastering in CM 1:5, 12mm thick for trench walls including the cost of all material, scaffolding charges, cement, labour charges, scafolding charges, all leads, lifts, as per standard specification.

Colour washing two coats with cement paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc., complete

Painting two coats of Enamel paint over one coat of primer for New Iron works including cost of all materials, labour, etc., complete.

Supplying and fixing of pin headed glass by using 3mm thick and ISI make complete for finished item of work, complete complying with the standard specification.

Supplying and fixing of colour coated galvalume sheet of 0.47mm thick of approved quality with necessary screws including cost of all materials, farication, labour for fixing, all lead, lift, etc., complete.

Supplying and fixing of MS Channels of size Flange 200 x7/8mm, Web 400-500 x4mm for roofing including cost of mateials fabrication, labour for fixing, all lead, lift etc., complete.

Supplying and fixing of purlins of size 250x70x22x2mm including cost of mateials fabrication, labour for fixing, all lead, lift etc., complete.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level -110mm

Supplying and fixing of110mm PVC sanitary pipe ( of 6 kg /sq.cm pressure) / specials of different sizes of approved quality and of reputed make including cost of all materials, lead and lift, etc., complete.

Supplying and fixing of PVC of approved quality and of reputed make suitable to resist a water pressure of 10 kg / sq.cm. To proper alignment and grade excluding cost of Specials, valves, tap, etc., including labour for fixing the specials in pipe line and cost of materials like shelloc, thread, cutting, threading of pipes. 40mm dia

32 mm dia

20mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. -PVC Bend 160 mm

PVC Bend - 110 mm

PVC Bend - 50 mm

PVC Bend - 40 mm

PVC Bend - 20 mm

PVC Elbow - 40 mm

PVC Elbow - 20 mm

Supplying and fixing in position first quality and approvedvariety of Gun Metal Gate Valve / Wheel Valve / CheckValve / Push cock (Heavy type) with I.S.I.mark of thefollowing sizes including cost of Shellac , thread etc,.including labour for cutting and threading of .Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.(per 1 No.) - 40 mm

Supplying and fixing in position first quality and approvedvariety of Gun Metal Gate Valve / Wheel Valve / CheckValve / Push cock (Heavy type) with I.S.I.mark of thefollowing sizes including cost of Shellac , thread etc,.including labour for cutting and threading of .Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.(per 1 No.) - 20 mm

Suppling and fixing in position 15mm.diameter brass / C.Pscrew down tap / pillar tap / swan neck tap (heavy duty)of approved make conforming to I.S.specifications andquality including cost of shellac , thread etc.complyingwith standard specifications and including cutting and threading wherever necessary (Taps should be got approved by the executive Engineer before use on the work.(per 1 No.)

Supplying and fixing of cast iron man hole cover size 60x60cm cover of heavy duty including cost of all materials lead, lifts, labour etc., complete

Providing two coats of Oil bound distember of approved quality and colour over one coat of primer to the wall surfaces as directed by the Engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift etc., complete.

Supply and fixing of Solid PVC door shutters using 19 gauge 19mm MS square tubes and outer frames. 15 mm square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm solid thick sheet. The shutters using 5mm thick solid PVC sheets for panelling including necessary furniture and fittings including cost of all materials lead lift etc., complete.

Supplying and fixing in position colour glazed EWC of approved Make & quality with 'P' or 'S' trap [Parryware -ELITE- or equivalent] with double flapped PVC AntiMicrobial Solid Seat cover , PVC low level SlimLine Cistern 12.5 litre capacity with all necessary fittings (viz.) Brass nipple, cp CP Angle cock, Nylon connection, CP brass fittings etc & connecting to water main complying with standard specifications including the cost of all materials, labour, lead,lift, T&P etc complete.-1set

Supplying and fixing of wash basin of size550x400mm with all accessories such as castiron bracket,32mm dia CP waste coupling, rupper plug and chain, 32mm dia Bclass CI waste pipe, GM wheel valve, nylon connection, 15mm dia brass nipple, 15mm dia CP pillar tap etc. including cost of all accessories, transportation , labour, leads, lifts fixing, etc, complete

Supplying and fixing of best quality of mirror of size 600 x450mm mirror with soap tray, screw and fixing near the wase basin, teak wood round block, including cost of all material, labour, lead, lift, etc, complete.

Removing the existing weathering course, clearing away the debrises from the roof top and clean the surface with water including cost of labour lead, lift, etc, complete as per standard specification.

Supplying and laying of Solar reflective ceramic tiles roof flooring for Sub Division office and North / Madukkarai Section office of approved quality & colour laid in CM 1:2, 12mm thick and pointing with white cement using 0.40kg/m2 including finishing the joint and pointing flush with tiles surface, including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.

P.C.C 1:2:4 using 10-6mm HBG metal for flooring screed concrete including cost of all materials lead, lift, labour charges etc., complete and as directed by engineer at site

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only