REPAIR MAINT OF WATCH TOWERS GURAD REST ROOMS CERTAIN FLOORINGS ROOF SHEETINGS CHAJJAS SANITARY FITTINGS PLASTERING AND ALLIED WORK AT OTM AND RESIDENTIAL ACCN AT R AND D E E DIGHI PUNE 15

Amount

Dismantling of floors hearth or walls tiling and Stone floor including cement mortar bedding (but not backing) & removing serviceable tiles to store and rubbsih of the premises complete all as specifed and directed.

Demolition of cement concrete exc 15 cm (below or above ground level) complete all as specifed and directed.

All as per Item No 02.00 here in before but above ground floors complete all as specifed and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate), 75 mm thick as in sub base for floors, complete all as specified and directed.

M&L in reapir 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggre) as in sub base of floor complete all as specifed and directed.

M&L for 15mm thick Screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes complete all as specifed and directed.

M&L for Rendering 10mm thick (as backing coat) on fair faces of brick work or concrete sufaces in CM 1:3 complete all as specifed and directed.

M&L for Glazed Vitrified ceramic tiles (GVT) glossy finish as in flooring and skirting of Light shade 10mm thick (square/ rectangular) polished area of each tiles size exc 0.11 sqm but n exc 0.36 sqm, 9 to 10 mm thick in floors, skirtings etc., set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. Note: Soluble salt, Double charge, twin charged etc not acceptable

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors, skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No 09.00 here in before but size ot tile exc 0.11 sqm but n exc 0.36 sqm

M&L for coloured Glazed ceramic tiles in vertical surfaces 450/ 600x300 mm thickness as per manufacture ( With two borders and mothiff pattern ) / High lighter tiles on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over a backing coat of 10 mm thick plaster in CM 1:4 including dubbing out coat to an average thickness of 10 mm thick in CM (1:6) , complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including poining in white cemen t(1:2) using marble dust with admix?ture of pigment to match with shade of granite complete all as specifed and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specifed and directed.

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any type and shade as complete all as specifed and directed.

M&L for Machine cut kota stone slab as in flooring and skirting 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifed and directed.

M&L for Machine cut cudappa stone slab as in horizontal, vertical surfaces and skirting 20-25mm thick over with or without cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifed and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specifed and directed.

S&F anodised aluminium snap grid frame work for false ceiling complete all as specifed and directed.

S&F 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specifed and directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specifed and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specifed and directed.

Taking down Wall panelling and similar work in any position, pattern and material complete all as specifed and directed.

S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specifed and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specifed and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specifed and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specifed and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each complete all as specifed and directed.

S&F second class hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,.

S&F MS hold fasts conforming to Fe -410 complete all as specifed and directed.

M&L for plain cement concrete as in bed plates 1:2:4 Type B0 (using 12.5mm graded stone aggregate) complete all as specifed and directed.

M&L for treating small articles such as hold fasts with tar or coal tar black paint incl preparation complete all as specifed and directed.

S&F Glazed and skeleton shutter 35mm thick open rebeted prepared to recived glass without sash bar complete all as per specified and doirected

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels and one face is covered with decoretive face veneer with lipping / frame to matchcommercial type on both sides complete all as specifed and directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in oppining complete all as specifed and directed.

S&F factory made solid panel PVC shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stylies and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stylie & rails with sutailble PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site complete all as specifed and directed.

S&F Aluminium, anodised barrel tower bolt 150 mm complete all as specifed and directed.

S&F Aluminium alloy , anodised sliding door bolt with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm complete all as specifed and directed.

S&F Aluminium handles fabricated type 150 mm complete all as specifed and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

S&F Mild steel cold rolled Butt hings 100 mm medium weight complete all as specifed and directed.

S&F aluminium powder coated frame for doors, windows, partitions and ventilators with one or more rebates including necessary jointing cleat for fixing etc complete all as specified & directed.

S&F anodised aluminium window, doors and ventilator shutter, sliding/ fixed type without sash bar , aluminium section weighing 0.55 Kg/Mtr including necessary jointing cleat glazing clips rubber packing anodised aluminium snap beading screws, rollers, locks etc complete all as specifed and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specifed and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specifed and directed.

M&L for sheet glass ordinary quality 4 mm thick fix in Aluminium/ steel, window/vent shutter area exc 0.50SqM in each pane complete all as specifed and directed.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specifed and directed.

S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specifed and directed.

S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed.

S&F in repairs Aluminium alloy , anodised sliding door bolt with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm complete all as specifed and directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specifed and directed.

S&F in repairs 25mm bore stainless steel 304 grade curtain rods with suitable fancy type brackets and fixed in position using stainless steel screws complete all as specifed and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples (304 Grade) complete all as specifed and directed.

S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed.

S&F in repair 25mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specifed and directed.

Demolition of Brickwork or PCC block masonary, stone/bou-lder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specifed and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 (using 20 mm gde agg) type C1 exc. 10 cm in width and setting in CM 1:6, complete all as specifed and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specifed and directed.

Taking down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing in repairs to old steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) of bore of pipe 15 mm bore complete all as specifed and directed.

Refixing in repairs to old steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) of bore of pipe 20 mm bore complete all as specifed and directed.

Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, icluding connecting with exsting GI steel tubing complete all as specifed and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth complete all as specifed and directed.

S&F in repairs 500 litres (ISI Marked) capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes complete all as specified and directed.

S&F in repairs 1000 litres (ISI Marked) capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes complete all as specified and directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.

S&F in repairs 15 mm bore, 60 cm long PTMT connecting pipe fitted with unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed.

S&F in repairs 15 mm bore, 45 cm long PTMT connecting pipe fitted with unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, chromium plated for iron pipe or for unions angle cock complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) complete all as specified and directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specifed and directed.

S&F in repairs, vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, flush pipe for joining etc complete all as specifed and directed.

S&F in repairs sink made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specifed and directed.

S&F in repair for vitreous China wash basin, white, flat back, size 580x450mm including necessary brackets,cp couplings, pvc waste pipes etc. complete all as specified and directed.

Supply only for Pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore CP brass health faucet of 1.2m long including brass holders, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs 15mm bore CP brass two way bib cock, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs PVC water tank covers suitable for 500/ 1000 ltrs capacity including conecting clips and fixing screws complete all as specifed and directed.

S&F in repairs gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20mm bore pipe complete all as specifed and directed.

All as per item No 91.00 here in before but 15mm bore pipe

S&F in repair PVC floor trap/nahani trap incl stainless steel gratings, 75 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specifed and directed.

S&F in repair Ball catcher with 8 mm dia steel ball and brass body and skirting plate including leting in and fixed complete all as specified and directed.

Taking down cement plaster from brick / concrete/ stone surfaces including racking out joint , hacking for key and scrubing down with water etc all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of any description in CM 1:6 and finishing the surface with Sagol Finish, all as specifiied and directed.

M&L rendering 10mm thick in cm 1:4 on brick or concrete of any description finished even and fair without using extra cement and using water proofing compound etc all as specified and directed. Note: WPC will be measured and paid seperately as supply only.

M&L for Rendering 20mm thick in two coats (15mm + 5mm) on fair faces of stone masonry surfaces in CM 1:4 using WPC on second layer all as specified and directed. Note: WPC shall be measured and paid seperatly as supply only.

M&L for Rendering 20mm thick in two coats on fair faces of stone masonry surfaces in CM 1:6 (sagol finish).complete all as specifed and directed.

Taking down old cement plaster from ceiling concrete surface, scubbing down with water etc, and plastering 5mm thick in CM 1:3, complete all as specifed and directed..

M&L for preparation of newly cement plastered wall surface and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering and a coat of primer complete all as specifed and directed.

Preparation of newly plastered surface of wall, applying two coats of exterior acrylic emulsion over a coat of exterior acrylic primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and directed.

Preparation of newly plastered surface of wall, applying two coats of cement based paint over a coat of exterior primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and directed.

M&L for preparation of newly plastered ceiling surface and applying three coats of white wash complete all as specifed and directed.

Supply only integral water proofing compound of approved make complete all as specifed and directed.

Preparation of old surfaces of wall and applying one coat of white wash on walls complete all as specified and directed.

All as per Item No 106.00 here in before but on ceiling surfaces

Preparation of old distempered surfaces of wall and applying one coat of oil bound distemper etc all as specificed and directed.

Preparation of old distempered surfaces of ceiling surfaces applying one coat of oil bound distemper etc all as specificed and directed.

Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specifed and directed.

M & L for one coat of cement base paint on walls incl, preparation of old decoreted surfaces complete all as specifed and directed.

Removing of debries (Concrete debries, tiles etc) out side the MD Land (R&DE Dighi) complete all as specifed and directed.

S/F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia including taking down old pipes complete all as specifed and directed.

S/F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia including taking down old pipes complete all as specifed and directed.

S/F in repair PVC (SWR) bends any radius 110 mm dia complete all as specifed and directed.

S/F in repair PVC (SWR) bends any radius 75 mm dia complete all as specifed and directed.

S&F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specifed and directed.

S&F in repairs exc 6 sqcm and n exc 13 sqcm II class hardwood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specifed and directed.

All as per Item No 119.00 but steel roof sheeting complete.

M&L for Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including corrugated ridge sheeting complete all as specifed and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and directed.

S&F Rolled mild steel in plates (Plain) square cut or notched (ordinary and colour sunk) forming holes, without any attachment confirming to Fe 290 (Gde E-165) complete all as specifed and directed.

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,confirming to Fe 290 (Gde E-165) complete all as specifed and directed.

S&F rolled mild steel in purlins /rafters of channels, angles or tee sections, fixed with MS angle cleats,plates etc incl all necessary welding , bolting etc. independently without connecting plates, etc.,confirming to Fe 290 (Gde E-165) complete all as specifed and directed.

Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specifed and directed.

S&F in repairs 50mm thick precast reinforced (steel fibres) cement concrete LD-2.5 , M-30 (Min Grade of Concrete) drain cover slabs square or rectangular in size area of each cover exc 0.5 sqm supprted on walls including 10mm to 12mm dia steel handles to each covers complete all as specifed and directed. All as Per IS IS: 12592:2002 Note: Rate is including Reinforcement (Steel fibres) used in the drain covers

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type),size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), including 15mm bore Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-50gms), 32mm bore Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms)

M&L for easning of existing steel windows/ ventilator shuttres using grease or oil complete all as specifed and directed.

M&L for cutting V groove in existing cement plaster cracks on wall surface and cleaning the surface with wire brush, filling the cracks using Dr fixit crack filler in two coats, including preparation of surface and applying a coat of interior/ exterior wall care putty to make the surfae suitable to receive further tretment, complete all as specified and as directed.

M&L for preparation of vertical or horizontal external surfaces and applying two coats of Asian smart care damp proof (or equivalent) layers as per manufaturer instructions complete all as specifed and directed.

S&F in repairs stainless steel 304 grade kitchen plate rack of size 750mm x 900mm complete as specified and directed. Makes: Bluestar/Pryag/Nirali/Amco/Neelkanth/Silver Shine

S&F in repairs 450mm x 600mm PVC body cabinet Mirror and fixing to the wall with suitable screws etc Make: Prayag

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, including taking down existing door leaf and refixing in position complete all as specifed and directed.

Taking down existing hinges from the steel windows and S&F MS hinges suitable for steel windows, including necessary welding, painting to small asticles etc, complete all as specifed and directed.

S&F in repairs 50mm bore High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm, including bends, Tee, socket etc complete all as specifed and directed.

vishalconstruction