GE863/EWS-T-28 OF 2022-23

Amount

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in unframed work, complete, all as specified and directed

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section, complete, all as specified and directed.

Demolition of PCC block masonary built in cement mortar including all quions, arches,pillars etc but precast concrete block walling, complete, all as specified and directed

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar, complete, all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises, complete, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete, all as specified and directed.

Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition, complete, all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames) including removing from site, complete, all as specified and directed

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames). including removing from site, complete, all as specified and directed.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed, complete, all as specified and directed.

ditto all as above except timber, complete, all as specified and directed.

S & F 1.25 mm thick pressed steel frame size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete, all as specfied and directed.

M & L for 6 mm (No of ply 5) thick plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling, complete, all as specified and directed.

M & L 4 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc,complete, all as specified and directed.

M & L for Second class hard wood as in plain fillets, square, rectangular, traingular in section wrought secured with nailsor brads of sectional area exc 3 Sqcm & not exc 6 Sq cm, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 Sqcm & n .exc 25 sq cm, complete, all as specified and directed.

S&F aluminium partition wall of section as in frame size 63.5 x 38.1 x 2 mm thick incl 8 mm thick glass/ 12 mm thick prelaminated particle board panelling including MS channel (Size of panel n. exc 1.5 sqm each) and all necessary fittings all as approved by Engr in charge, complete, all as specified and directed.

M &L for pre-cast cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified and directed, complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified and directed, Except stone, complete, all as specified and directed.(Note :- Stone shall be used as obtainedfro, item No - 05.00 here-in-before).

M&L precast PCC (1:3:6) type C1 using 20 mm well graded stone aggregate as in bond stone set in cement mortar (1:6), complete, all as specified and directed.

M&L for PCC (1:3:6) type C-1 using 20mm well graded stone aggregate for coping, parapaet, thrust block and other similar items, complete, all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 Using 12.5 mm well graded stone aggrgate as in sub base in floors, complete, all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6), complete, all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar (1:4) on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles, complete, all as specified and directed.

M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm/30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in cement mortar (1:4) as in floors with grey cement and pigment, complete, all as specified and directed.

M & L for machine cut kota stone slab flooring 18 to 20 mm thick over and including 15 mm thick screed bed laid in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, complete, all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) as in skirting/dado over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, including cutting, rubbing and mirror polishing (Granite finish), complete, all as specified and as directed.

M & L for providing cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in roof kerb or mud stops, round on edges including necessary formwork, complete, all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6), type C-2, (using 40 mm well graded Stone aggregate), as in plinth protection, finishing cement concrete surface fair and even without using extra cement ,laid in alternate panels including forming joints at 2 mtr intervals and filled with bitumen mastics ,complete, all as specified and directed.

M&L for 75 mm thick Plain cement concrete (1:3:6) type C2 using 40 mm well graded stone aggrgate as in sub base of flooring, complete, all as specified and directed.

M&L for RCC (1:2:4) type B-1 using 20mm well graded stone aggregate as in Chajjas etc, complete, all as specified and directed

M & L for RCC (1:2:4) type B-1 20 mm well graded stone agg as in Beams , cantilevers, bressummers, lintels etc, complete, all as specified and directed

M & L RCC (1:2:4 ) type B-1 using 20 mm well graded stone aggregate as in slabs supported on walls, beams and columns; in floors, roofs, landings balconies, canopies, deck slabs and in shelves, complete, all as specified and directed.

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete, complete, all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete, complete, all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete, all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.

M & L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.

S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap using grade of zinc coating -275. inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc,. complete, all as specified and directed.

Fixing only sheeting (any thickness) with two corrugation side lap using grade of zinc coating -275. inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc, complete, all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S & F of 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete, all as specified and directed.

M & L rendering 15mm thick on fair faces of concrete surfaces in cement mortar (1:4) incl finished even and smooth without using extra cement, complete, all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster (1:4) using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement), complete, all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster (1:6) and finished even and smooth (without using extra cement), complete, all as specified and directed.

M&L for raised pointing to random/square rubble masonary stone walling with CM (1:3), complete, all as specified and directed.

Supply only integral water proofing compound of approved brand/make, complete, all as specified and directed.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete, all as specified and directed.

S & F 40 mm thick second class hardwood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl 5 mm thick teakwood leaping, complete, all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009), complete, all as specified and directed.

S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009), complete, all as specified and directed.

S & F second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats, complete, all as specified and directed.

S&F Aluminum anodized frame for doors, windows, ventilators powder coating (Min thickness of powde coating 50 microne) with one or more rebated including jointing cleats for fixing etc, complete, all as specified and directed.

S&F Aluminum anodized window and ventilator shutters side hung type without sash , aluminum sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stays 150mm long (one/two no) hinges type B-21 100mm long (2 no/3 no) suitable handle (01/02 no) for each leaf ,powder coating of any colour (Thickness of powder coating not less than 50 micron), complete, all as specified and as directed.

S&F Aluminium alloy wire cloth, 0.45 mm nominal dia wire and average width of aperture 1.40 mm and fixed with aluminium wire staple, complete, all as specified and directed.

S&F 5.5 mm thick tinted glass in aluminium doors & windows with rubber packing (any thickness, size from aluminium beading), coloured anodised aluminium, complete, all as specified and directed.

S & F MS work as in clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165,complete, all as specified and directed.

M & L for providing cement concrete type C1 (1:3:6) using 20mm graded stone aggregate as in hold fast blocks including form work complete, all as specified and directed.

S & F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed,complete, all as specified and directed.

S & F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed,complete, all as specified and directed.

S & F 300mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.

S & F 150 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed.

S & F 125 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F 125 mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed..

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed.

S & F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete, all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.

M&L for preparation of old plastered surfaces & applying two coat of distempering, complete, all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer, complete, all as specified and directed.

M&L for preparation of old plastered surfaces & applying two coat of cement base paint , complete, all as specified and directed.

M&L for Preparation of new wall surface, and applying three coat of White wash, complete, all as specififed and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality,) complete, all as specified and directed .

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer,complete, all as specified and directed.

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint)., complete, all as specified and directed.

S & F in repair Harrison rails of dia 20 - 22 mm, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete, all as specified and directed.

S & F in repair 20mm dia, aluminium alloy anodised curtains rails with fixing brackets, stops, rollers etc, complete, all as specified and directed.

S&F of 18 mm - 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete, all as specified and directed.

M &L for Circular cutting or notching and waste of any thickness and size of tiles, granite and Marble stone, complete, all as specified and directed

S&F in repair first quality , Wash basins, vitreous china, white, flat back of size 550x400mm , including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete, all as specified and directed. MAKE :- Wash basin : HINDWARE/ PRAYAG/ JAQUAR/ PARRYWARE/ CERA.

S & F in repairs stop valve/angle valve, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of lengh 600mm, complete, all as specified and directed.

S&F in repairs Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms), complete, all as specified and directed.

S & F in repairs 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete, all as specified and directed.

Taking out/taking down old unserviceable damaged GI water tubing pipe of 15 mm size from excavated trenches or from wall/floor including removing of fittings, complete, all as specified and directed.

S & F 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long, complete, all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith complete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces, complete, all as specified and directed.

Taking down unserviceable submain wiring and service cable alongwith batten/PVC conduits etc and making good disturbed surfaces of walls/floor and match the existing surface, complete, all as specified and directed.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing from board, complete, all as specified and directed.

M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylum laminated sheet on top for fixing switches sockets etc. for one light point/ fan point controlled by one switch, complete, all as specified and directed.

All as per Srl item No 98 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm, complete, all as per specified and directed.

All as per Srl item No 98 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm, complete, all as per specified and directed.

All as per Srl item No 98 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 2.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor, complete, all as per specified and directed.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply and fixing of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type, complete, all as specified and directed.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type,complete, all as specified and directed.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply & Fixing of Ceiling Rose, 3 phase polycarbonate isolated body including junction round pvc cover plate with brass screw/nuts, complete, all as specified and directed

Supply and fixing in replacment surface & wall mounted LED 20W tube light fitting, batten 4 feet, ultra slim square profile LED light fixture with extruded polycarbonate, enviormental friendly, energy efficient, 6500K with all accessories complete all as specified and directed. Make: Havells Cat No LHEXAWP7IN1W020 or WIPRO-Cat No D552065 OR Crompton Cat No. LDLSR20-CDL

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings, complete, all as specified and directed. Make : Anchor/leader/havells

S&F in replacement of LED lamp 9 Watt, complete, all as specified and directed

Supply & Fixing in replacement bulk head light fitting with 10 W LED Lamp, complete, all as specified and directed. Make :- Cat Part No - HEXAFT10WLED857SSYMBPOC or Wipro Cat Part No - LW07 - 141 XXX-57-G1

S & F sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt with 200 amps rated bus bar complete with bus and neutral link,complete, all as per specified and directed.

S&F in repalcement of MCB SPN 40 Amps ,10 KA 230 Volts ,50 HZ, complete, all as specified and as directed

S&F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ, complete, all as specified and as directed

M&L in replacement of earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground(earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthling lead by means of bolts nuts, check nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with char coal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 20mm dia GI protection pipe light grade all as shown in electrical plate no-3 of SSR part-I and connected to earthling test point, and including testing on completion complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 6 Sqmm, complete, all as per specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia MS suspension wire, one twin core cable flat or circular of size 16 Sqmm, complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia MS suspension wire, one twin core cable flat or circular of size 10 Sqmm, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 1 module, complete, all as specified and directed

M&L in replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete, all as apecified and directed.

S&F in repalcement of RCBO for earth leakage, over load & short circuit protection, double pole 40 Amps, 230 Volts ,50 HZ with 100 mA, complete all as specified and as directed

S&F in replacement street light fitting for 35 watt LED with lens, compact street light fitting with deep drawn die cast aluminum housing complete incl provn of PVC insulated unsheathed copper conductor single core cable 2.5 Sqmm, 1.5 mtr long approx for connection from OH line to fitting, complete, all as specified and directed

Note:- The total shall subject to adjustment of credit of Rs 53866.50 for old Materials as per Schedule of Credit.

H.S. Enterprises

GULATI BUILDERS