PROVISION OF DEMOLITION AND RECONSTRUCTION OF TOILET AT ALG, PROVISION OF 6KLD FRP SEPTIC TANK AT CERTAIN LOCATION AT HQ EAC (U) AF UNDER GE (I) (AF) SHILLONG

Amount

Taking down chowkhats with shutters (without taking off shutters from the frames) & removing from site area exc 1.5 Sqm & n. exc 4.00 sqm each complete all as directed.

Dismantling water tanks of size exceeding 250 ltr but exceeding 500 ltr and removing to store complete all as directed by Engineer-In-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia

Demolition of Brickwork or stone/ boulder masonry, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as directed by Engineer-In-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out soft or loose soil complete all as specified.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft / loose soil for removing old and laying new pipes , complete all as specified and directed at site.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundation, filling and mass concrete complete all as specified.

Material and labour for pre-cast cement concrete block masonry with solid blocks 1:3:6 type C1 20 mm graded crushed stone aggregates, exceeding 10 cm in width and setting in cement mortar 1:4, complete all as specified. Note: Formwork shall be paid including this item but reinforcement shall be measured and paid separately.

Material and labour for reinforced cement concrete 1:2:4 type B0 using 12.50 mm graded crushed stone aggreagates as in Beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as specified. Note: Formwork shall be measured and paid including this item but reinforcement shall be measured and paid separately.

Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for 20 mm thick rendering in cement mortar 1:4 in two layers (12 mm +8 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (8 mm) as per manufacturer instruction complete all as specified and as directed by Engineer-In-Charge. Note: LWPC shall be measured and paid including this item

Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finshed even and smooth without using extra cement complete all as specified.

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco

Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 450 mm x 350 mm as in skirting / dado or in vertical surfaces set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .

Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.

Supply and fix 100 mm long aluminium alloy handles, fabricated type, anodized all as specified.

Supply and fix as in repairs Vitreous China wash basin, white, flat back, size 550 mm x 400 mm including 32 mm dia waste fittings and waste pipe including brackets complete all as specified. Make Johnshon / Jaquar / Cera/ Parryware

Supply and fix PVC flexible sink/wash basin waste pipe drain hose/ outlet pipe of 35 inches as spesified and directed Note: Prayag/ Johnshon / Jaquar / Cera/ Parryware

Supply and fix 15 mm bore CP pillar tap,pressmatic with aerator complete as per manufacturer instruction. Make:- Jaquar Cat No PRS-031/ Johnson Cat No T2001C/ Cera Cat No F9020101

Supply and fix 15 mm dia cast copper alloy chromium plated Angle valves, with wall flange concealed type screwed down for iron pipe of for unions complete all as specified and directed. Make :- Parryware Cat No T3907A1/ Cera Cat No F1016201/ Johnson Cat No T5310C

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified. Make:-Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff

Supply and fix frameless bathroom mirror of size 600 mm x 450 mm x 5 mm, cerium oxide polish mounted on 9 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as per manufacturer instruction. Make: Sant Gobain/ Modiguard/ Prayag

Supply and fix Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 500 ltr capacity hoisted and fixed in position including 20 mm dia Ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified Make:Sintex/ Astral/ Finolex/ Supreme

Supply and fix one piece Vitreous China wash down water closet pan floor mounted, white including fixing bolts, 10 ltr capacity flushing cistern,flush pipe plastic water closet seat white including jet spray, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices and also including 'P' or 'S' trap complete all as per manufacturer instruction. Make of Pan Parryware Verve AM / Cera CAMPBELL/ Johnshon COSMO

Supply and fix vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified. Make Parryware Cat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW

Supply and fix CP health faucet with tube and wall hook including all fittings as per manufacturer instruction. Make: Parryware Cat No T9961A1/ Jaquar Cat No ALD-579 / Johnson Cat No S0826C

Supply and fix for 15 mm dia cast copper alloy chromium plated two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as Per manufacturer instruction. Make :- Parryware Cat No G2381A1/ Cera Cat No F1016163/ Johnson Cat No T3370C

Supply and fix 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as per manufacturer instruction Make Parryware Cat No E8109 / Cera Cat No B1020101/ Johnshon Cat No P2831PW

Supply and fix 75mm dia PVC (SWR) floor trap, plain with gratings including jointing with solvent cement complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag

Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, as in wall complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, as in wall complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix 110 mm dia PVC (SWR) junction single, (Single `T') equal or unequal all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag

Supply and fix 110 mm dia PVC (SWR) bends with access door complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag

Supply and fix 75 mm dia PVC (SWR) bends with access door complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag

Supply and fix 110 mm dia PVC (SWR) vent cowl complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Material and labour for preparation of newly plastered surfaces of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete, as per manufacturer's specification. Two or more coats over a coat of wall care putty complete all as directed. Make: Berger (Silk)/ Dulux (Velvet Touch)/ Shalimar Paints Ltd (Superlac Stay clean)/ Asian Paints Ltd, (Royal Aspira)/ Nerrolac Paints Ltd (Impression)

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces. Make: Berger (Silk)/ Dulux (Velvet Touch)/ Shalimar Paints Ltd (Superlac Stay clean)/ Asian Paints Ltd, (Royal Aspira)/ Nerrolac Paints Ltd (Impression)

Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified.

Supply and fix mild steel plates, plain or chequered, of any thickness in available sizes conforming to Fe 410 -W (GdeE-250) quality A with riveted, bolted or welded attachments complete all as specified.

Supply and fix 20 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 10 cm but not exceeding 15 cm long complete all as specified.

Supply and fix 20 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm but not exceeding 10 cm long complete all as specified.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Material and labour for prepration new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and fix anodised aluminium window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply and fix 5 mm thick figured glass, pin head type and glazing in square exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.

Material and labour for 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregates as in sub bases complete all as specified.

Supply and fix Pavement floor vitrified tiles of size 300x 300x 10 mm thk (Endura tiles of Johnson or equivalent makes listed in List of Makes) of approved colour and design set and jointed in neat cement slurry and pointed in white or coloured to match including 20 mm th screed bed in cement mortar 1:4 complete all as specified and directed. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell Ltd

Excavating over areas, not exceeding 1.5 m deep and getting out soft/ loose soil complete all as specified.

Material and labour for walling random rubble uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 as in retaining walls, wing walls, abutment and the likes complete all as specified. Note: Precast PCC bond stone will be measured and paid seperarely against item here-in-after

Material and labour for hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level with broken boulders/ stones complete all as specified.

Material and labour for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified.

Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in weep holes complete all as specified and directed. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Material and labour for PCC 1:2:4 type B1, 20 mm graded crushed stone aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in roof kerbs or mud stops, rounded or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified

Material and labour for providing precast cement concrete 1:3:6 type C1 using 20 mm crushed stone aggregates as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr the starting point complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/ loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified.

Material and labour for plain cement concrete 1:2:4 type B2 using 40 mm graded crushed stone aggregates as in foundation, filling and mass concrete complete all as specified.

Supply and fix Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to Fe 410 -W (GdeE-250) quality A complete all as specified.

Supply and fix on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregates below foundation, Vent shaft, connection etc., complete for 10 users.

Excavation of soakage well in any type of soil, foundation in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 1.5 M effective depth

Material and labour for Hardcore of broken stone or boulder gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.

Material and labour 50 mm thick PCC type C2, 1:3:6 using 40mm graded crushed stone aggregates as in hard standing/plinth protection including finishing the concrete surface even & smooth without using extra cement and laid in alternate bay complete all as specified.

Supply and fix Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), with all fixing accessories as per manufacturer instruction, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including brass screws, pointing around urinal back in cement. Make: Jaquar / Parryware / Cera

Supply and fix urinal partition of size 310 mm x 700 mm with frosted glass of minimum 10 mm thick complete as per manufacturer instruction. Make:- Johnshon/ Jaquar / Cera

Supply and Installation of PWTS series Polyethylene Tank which is an advance version of Septic Tank with capacity of 6000 liter per day, diameter of 2070 mm and height of 2510 mm Tank has two zone, first zone is septic zone where sludge is stabilized by anaerobic digestion. Second zone is pall ring media zone having surface area of 190 Sq.mt / Cum and retain micro-organism long enough to digest the organic waste which results in 60-70% of BOD reduction from final out let. It is provided with inlet & outlet pipe of 100 mm dia., Vent pipe of 50 mm dia, Internal piping, manhole cover of 400 mm dia. 1 Nos. Make: Sintex/ Prayag/ SFMC/ other equivalent make as approved by GE

Supply and fix high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast/ Prayag/ SFMC/ Fusion

Material and labour for 150 mm bore Concrete bed to drain pipes in cement mortar 1:3:6 type C2 using 40 mm graded crushed stone aggregates including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified.

Material and labour for providing precast cement concrete 1:2:4 type B1 using 20 mm crushed stone aggregates as in cover slabs. and setting in cement mortar 1:6 complete with joints to match complete all as specified.

Material and labour for point wiring (surface type) with 1.5 Sqmm PVC insulated (FRLSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet of 1.6 mm thick for mounting of fittings like switch, socket and fan regulator with3mm thick hylum laminated/bakalite sheet cover including taking out old wiring complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for 'N' capping and box of suitable module. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One light/ fan point/ call bell controlled by one, one way switch

One 3 pin socket outlet 5 amps on the same board with other switches

Material and labour for point wiring (surface type) with 4.0 Sqmm PVC insulated (FRLSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 4.0 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet of 1.6 mm thick for mounting of fittings like switch, socket and fan regulator with3mm thick hylum laminated/bakalite sheet cover including taking out old wiring complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for 'N' capping and box of suitable module. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One 3 pin socket outlet, 15 amps, independent board

Supply and fix as in repairs Switch piano, flush type single pole one way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket outlet , 3 pin 6 Amps 240 V flush type . Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs switch socket combination, 2 in 1, 5 pin 6 Amps and 16 Amps 240 V ,flush type. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs ceiling rose surface baklite with three terminals 240 V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in repairs lamp Angular holder insulated body with back plate suitable for batten fittings all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix as in replacement LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 12-15W LED surface mounted downlighter with white powder coated aluminum housing with integrated electronic driver and all accessores complete all as directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement sheet metal enclosure MCCB DB SPN with 160 Amp rated bus bar 4 way 415 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix as in repair MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix as in repair MCB SPN 240 volts, 50 Hz capacity 40 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 4.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith single run of 4.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit including taking down existing wiring complete all as specified and directed. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 10 Sqmm 2.0 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ KEI (ISI Marked)/ Gloster (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Supply and filling for dry sand in cable protection trenches before and after the cables are laid, for sand cushioning to cables complete all as specified and directed. NOTE : thickness after punning of sand shall be (minimum as specified in SSR) measured and paid in this item.

Material and labour for brick protection for UG XLPE cable with burnt clay old size sub class 'B' bricks laid dry and flat abutting each other with gaps between adjacent brick not more than 10mm and width equal to length of brick in trenches across the cable complete all as directed by Engineer-In-Charge. Make: Best quality locally available which is duly approved by GE.

Material and labour for tubes "light grade" galvanised with all fittings laid in trenches of 40mm bore dia. Make : Tata / Jindal Steel / Prakash/ Surya Roshni ltd

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick,buried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel, earth strip protected by and including GI Pipe 40 mm dia bore(light grade) and connected to main test point as directed and including Concrete Pit in PCC (1:3:6) type C1 precast RCC (1:1.5:3) type A1 cover slab 54 X 54 X 5 Cm reinforced with 8mm dia TMT bars@150mmC/C both ways with one handle for lifting made of 8mm dia TMT bar embeded in precast cover slab,funnel,wire mesh , 20 mm bore GI Pipe (medium grade) for watering charcoal and salt in alternate layers, incl necessary excavation and earth work in any type of soil complete all as shown on electrical plate no 3 of SSR part I complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase, ISI Marked, heavy duty with 1400 RPM, 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of walls for fixing exhaust fan and making good the disturbed surfaces with required plaster work and applying distempered and putty to match with existing surfaces and cleaning and stacking bricks , removing surplus serviceable bricks, hardcore, etc. to store and rubbish not exc. 50 m complete all as specified and as directed by Engineer-In-Charge. Make: Almonard (ISI Marked) / Usha (ISI Marked) / Orient (ISI Marked)/ Bajaj (ISI Marked)/ Havells (ISI Marked) / Crompton Greaves (ISI Marked)

Supplying and laying 3 layer PP-R (polypropolene randam copolymer) pipes SDR 7.4 UV stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply, all PP-R plain and brass threaded polypropolene random fittings fixed complete to walls, ceilings or in floor etc for 32 mm outer dia pipes complete all as specified and directed:- Make: M/s Jain Irrigation/ Kisan/ Prince/ Supreme/ Oriplast/ Finolex/ SFMC/ Fusion

Supply and fix as in repairs PP-R Gate valves (brass insert) screwed both ends for PPR pipes and fixed for following outer dia pipes complete all as specified and directed :- Make: M/s Jain Irrigation/ Kisan/ Prince/ Supreme/ Oriplast/ Finolex/ SFMC/ Fusion

M/s Nishi Kumar Das (BID ID -3068749)

MAHINDER ELECTRICALS (BID ID -3068863)

M/S DEEDAR ENTERPRISE (BID ID -3068065)

S K ENTERPRISE (BID ID -3068830)

M/s Gupta Construction (BID ID -3068392)

M/S T N CONSTRUCTION (BID ID -3068309)