REPAIR OF ADMINISTRATIVE BUILDING AT I A MASOORIE GULAWATHI ROAD DISTT HAPUR

Amount

Excavation of foundation in ordinary soil (Loam,clay or sand) including lift upto 1.5 M and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30M from the foundation trencehs.

Cement concrete in1:4:8 proportional with cement,coarse sand and 40mm gauge approved stone ballast including supply of all materia,labour T&P etc. required for proper completion of the work

R.C.C. work with cement, approved coarse sand & 20mm approved stone ballast in proportion of 1:1.5:3 in T-beam & slabs roof and R.C.C Column. including aupply all materials but excluding supply of reinforcement & its bending but including its fixing in position & binding the same with 24 BWG GI binding wire & including the cost of binding wire & including providing & fixing necessary centering & shuttering & its removal after completion of work & supply of all other materials, labour T&P etc.required for proper completion of work.

12 mm thick plaster with cement and coarse sand in 1:3 over brick work minimum thickness not to be less than 1.00 cm including supply of all materials, labour, tools & plant etc. reuired for proper completion of the work

R.C.C. work with cement, approved coarse sand & 20mm approved stone ballast in proportion of 1:1.5:3 in T-beam & slabs roof and R.C.C Column. including aupply all materials but excluding supply of reinforcement & its bending but including its fixing in position & binding the same with 24 BWG GI binding wire & including the cost of binding wire & including providing & fixing necessary centering & shuttering & its removal after completion of work & supply of all other materials, labour T&P etc.required for proper completion of work.

M.S. ( tor steel or plain) in plain work such as R.C.C. of R.B. work including bending for proper shape as necessary including bending for proper completion of the work and including supply of all steel & Wastage, bend, hooks and authorised overlapping shall be measured

M.S. Or Iron work in Z Section Window excluding glass panes(openable panel) wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing required for proper completion of the work SI No. 502(B)

M.S. Or Iron work in M.S. Grill & Stair case railing wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing required for proper completion of the work SI No. 502(A)

Providing and fixing pressed steel doors frames confirming to IS:4351 manugfactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, Lock jamb bead and if required angle threshold of mild steel angle of section 50x25 mm. or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with splits end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface and directed by enginneer in charge. SI No. 524 (new item)

Providing and Fixing ISI Marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters. 35 mm thick including ISI marked stainless steel butt hinges with necessary. (Lko SI No 9.21.1)

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat from diagonal 20x5 mm size with top and bottom rails or T-iron 40x40x6 mm with 38 mm dia steel pulys with bolts, nut locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. SI no. 518

Supplying and fixing rolling Shutters of approved make made 80x125mm cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by ene locks and mounted on specially designed pipe shaft with brackets, side guides and arrangement for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. SI No. 520

Providing and fixing ball bearing for rolling Shutters SI No. 523

Supply And Fixing aluminium fittings for doors Rate as per Market

12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:6 over brick work minimum thickness not to be less than 1.00 cm including dupply of all materials, Labour, tools & Plants etc. required for proper completion of the work SI No. 586

Dismantling of existing plaster including disposal of refuse as directed by engineer in charge with in distance of 60 meter( SI No. 706)

Dismantling of Reinforce cement concrete or reinforced brick work including stacking of materials as directed by the engineer in charge with in distance of 60 Meter(SI No. 694)

Supply of Fixing of Kota stone flooring 25 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coar(bedding) of 1:2 Cement & coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour tools & plants etc. required for proper completion of the work. (SI No. 632 new item 2)

Supply of Fixing 10 to 12 mm thick Kota stone tiles in skriting or dado laid with 1:2 cement and approved coarse sand mortar finished with in its cement colour slurry jointing and polished of approved quality complete including supply of all material labour, tools and plants etc. required for proper completion. (SI No. 632 new item 3)

20 mm thick cement plasted in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand lain in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. SI No. 597

Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified bt the manufactured) of 1st quality conforming to IS 15622 of approved make in all colours shades except white, ivory, grey, furne red brown. Laid on 20 mm thick bed of cement mortar 1:4( 1 cement :4 Coarse sand) jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. (LKO SI No. 11.38 )

Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools & plant etc. required for proper completion of the work. (SI No. 660)

White washing three coats including supply of all material, labour, tools & plants etc. requied for proper completion of the work. (SI No. 673)

One priming coat and one coat of dry distemper on new work including supply of all material, Labour, tools & plant etc. required for proper completion of work. (SI No. 681)

Providing & injecting chemical for post construction anti termite treatment with drilling holes at junction of floor with walls & pillars the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code including quarterly inspection and providing required treatment for one year. As direction bt the engineer-in-charge. SI No. New item (19.03)

Providing wall putty on old surface with approved quality material of berger/J.K/ Birla or similar make 2 coats (SI no. 15.22 New Items)

Painting or varnishing work in small areas or new wood work with two coats (upto one square meter of ready mixed priming paint and one coat of approved superior quality ready mix plant or varnish including supply of all materials, labour, tools & plants etc. required for proper completion of the work paint to be used should confirm the ISI No. (SI No. 641 + 642) Rs. 55.00 + Rs. 25.00 = 80.00

Supply of fixing of 4kg/sqcm , 110 mm (od) PVC down pipe (kissan/suprime make) complete with bends with door at top and plain at bottom and granting and including supply of necessary M.S. Clamp 2.5 cmx 3mm(1" x 1/8) fixed to walls with cement mortar (1:2) and including supply of 15 cm long 6mm (1/4) dia nail all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. UPPWD Mainpuri Circle SI No.42 of water supply)

Supply and fixing of 24 guage aluminium sheet of toilet door shutter bottom including fixing with aluminium greves & supply of all materials, labour, T&P etc. required for proper completion of work. (SI No. New Item 21.21)

Providing & Fixing glass panes 6 mm thick (Lko SI No. 9.7.7.2)

Dismantling cement concrete or brick( Mud Faska/Brick Tiles) or granolithic floors including base concrete and including stacking of dismantled materials as directed by the engineer-in-charge within a distance of 60 meter (200 feet) (SI No. 697)

Providing & Fixing Brick Coba 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerclic cement concrete water proofing compound filled gaps of coba & top of coba mortar 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x 30cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, T&P etc complete for (SI No. 549, New Item)

Providing & Fixing PVC Spout Pipes 15 Cm Long Dia 50 mm (Rates as per SI No. 730 (c))

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections appropriate Z sections and other section with dash fasteners of required dia and sizem including necessary filling up the gaps at junctions. i.e. at top, bottom and sides with required including cleat angle, aluminum snap beading for glazing/paneling, C.P. brass/stainless steel screws, all completete as per architectural drawing and the direction of engineer-in-charge ( Glazing, paneling and dash fasteners to be paid for separatly) Powder coated aluminium ( Minmum thickness of powder coating 50 Micron)

Making Khurra 45 cms x 45 cms with c.c. 1:2:4 average 5 cms thick including supply of all materials, labour, T&P etc. required for proper completion of work.(New item 21.20)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. Rates as per UPPWD Mainpuri Circle SI No. 12.21)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors ,embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-Charge. With stainless steel cover plate minimum 1.25 mm thickness Rates as per UPPWD Mainpuri Circle SI No. 21.4)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete (Rates as per DSR 9.83)

Circular shape 450 mm dia precast R.C.C. manhole cover with frame - L.D. - 2.5

Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. UPPWD Mainpuri Circle SI No.17.1.1)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. UPPWD Mainpuri Circle SI No.17.1.1)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern UPPWD Mainpuri Circle SI No.17.4.1)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps UPPWD Mainpuri Circle SI No.17.7.3)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. UPPWD Mainpuri Circle SI No.17.31)

Fixing C.P. brass towel rail with C.P. brass brackets fixed to wood plugs, Plastic sleeves with CP. Brass screws UPPWD Mainpuri Circle SI No.23.148)

Glass shelf 7/32" thick 600x130mm size with C.P. guard rail of standard size of bracket UPPWD Mainpuri Circle SI No.31 Sanitary works)

Providing and Fixing 110 mm PVC Cowel (as per market rates)

HEP Nahani trap of Indian make HCI 100x75mm UPPWD Mainpuri Circle SI No.67 Sanitary Material)

Providing and fixing PVC pipe conforming to IS make working pressure 4 Kg/SqCm incuding testing labour T&P and all complete fittings 140 mm diameter UPPWD Mainpuri Circle SI No.42 of water supply)

Providing and fixing PVC pipe conforming to IS make working pressure 4 Kg/SqCm incuding testing labour T&P and all complete fittings 110 mm diameter UPPWD Mainpuri Circle SI No.42 of water supply)

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design : Inside size 900 x 800mm and 500mm deep including C.I. Cover frame. UPPWD Mainpuri Circle SI No.19.7.1

Fixing S.W. gully trap grade "A" complete with C.I. Grating, brick masonary chamber and water tight C.I. Cover frame of 300mm x 300mm size (inside) square mouth traps or "P" or "S" type traps. 100X100mm dia UPPWD Mainpuri Circle SI No.19.4.4.1

Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. for 500 Liters. (UPPWD Mainpuri Circle SI No.02 MISCELLANEOUS)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore UPPWD Mainpuri Circle SI No.18.49.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore UPPWD Mainpuri Circle SI No.18.51.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore UPPWD Mainpuri Circle SI No.18.53.1

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms Rates as per DSR Item No. 17.70.1

Fixing gunmetal check or non return value of all nominal base 25mm dia UPPWD Mainpuri Circle SI No.23.99

Fixing gunmetal check or non return value of all nominal base 20 mm dia UPPWD Mainpuri Circle SI No.23.99

C.I. Jali Round 100mm dia UPPWD Mainpuri Circle SI No.78(a) WATER SUPPLY MATERIAL

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore UPPWD Mainpuri Circle SI No.18.52.1.

Laying cement concrete1:5:10in haunching S.W. (PVC pipes used instead of S.W.)pipes including concrete for bedding necessary form work and curing complete. 150mm dia UPPWD Mainpuri Circle SI No.19.2.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. UPPWD Mainpuri Circle SI No.18.7.1, 18.7.2 & 18.7.3 16 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Tubewell for Water Supply to administrative Building Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. all types of soil. 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 100 mm dia

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge Rates as per DSR Item no 24.8

Supply & Installation of Submersible Pump of KSP make 2HP, control panel suitable for 2HP Pump, Submersible cable suitable for 2HP Pump load, CVPC verticle pipes 25 mm dia in 10 feet length approved make & quality length 35 meters, clamps, caps, MS Rope for safety of pump & including supply of all material, T&P, etc. required for proper installation of submersible pump, as per direction engineer in charge.

M-150 class brick work in 1:3 cement & approved coarse sand mortar in foundation & plinth including supply of all material, labour & T&P etc. required for proper completion of the work. SI No. 307

M-150 class brick work in 1:6 cement & approved Fine 1.25 F.M. sand mortar in foundation & plinth including supply of all material, labour & T&P etc. required for proper completion of the work. SI No. 303

12 mm thick plaster with cement and coarse sand in 1:3 over brick work minimum thickness not to be less than 1.00 cm including supply of all materials, labour, tools & plant etc. reuired for proper completion of the work SI No. 583

12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:6 over brick work minimum thickness not to be less than 1.00 cm including dupply of all materials, Labour, tools & Plants etc. required for proper completion of the work SI No. 586

Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools & plant etc. required for proper completion of the work. (SI No. 660)

Painting or varnishing work in small areas or new wood work with two coats (upto one square meter of ready mixed priming paint and one coat of approved superior quality ready mix plant or varnish including supply of all materials, labour, tools & plants etc. required for proper completion of the work paint to be used should confirm the ISI

Excavation of foundation in ordinary soil (Loam,clay or sand) including lift upto 1.5 M and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30M from the foundation trencehs. SI No. 251 A

Cement concrete in1:4:8 proportional with cement,coarse sand and 40mm gauge approved stone ballast including supply of all materia,labour T&P etc. required for proper completion of the work SI No. 281

RCC work Providing and laying in position specified grade of reinforced cement concrete in Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) SI No. 287

R.C.C. work with cement, approved coarse sand & 20mm approved stone ballast in proportion of 1:1.5:3 in T-beam & slabs roof and R.C.C Column. including aupply all materials but excluding supply of reinforcement & its bending but including its fixing in position & binding the same with 24 BWG GI binding wire & including the cost of binding wire & including providing & fixing necessary centering & shuttering & its removal after completion of work & supply of all other materials, labour T&P etc.required for proper completion of work. SI No. 288

M.S. ( tor steel or plain) in plain work such as R.C.C. of R.B. work including bending for proper shape as necessary including bending for proper completion of the work and including supply of all steel & Wastage, bend, hooks and authorised overlapping shall be measured SI No. 504

M.S. Or Iron work in M.S. Grill & Stair case railing wrought to required form including supply of steel bolts, nuts, wastage etc. and their fixing required for proper completion of the work SI No. 502(A)

12 mm thick plaster with cement and coarse sand in 1:3 over brick work minimum thickness not to be less than 1.00 cm including supply of all materials, labour, tools & plant etc. reuired for proper completion of the work SI No. 583

Painting or varnishing work in small areas or new wood work with two coats (upto one square meter of ready mixed priming paint and one coat of approved superior quality ready mix plant or varnish including supply of all materials, labour, tools & plants etc. required for proper completion of the work paint to be used should confirm the ISI No. (SI No. 641 + 642)

Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools & plant etc. required for proper completion of the work. (SI No. 660)

Construction of ramp, Stainless Steel handrail, gril & techtile tiles etc complete for disabled persons as per direction of engineer in charge.

Providing, Laying & Fixing PVC coduit pipe with electrical wire and electrical fitting including electrical boards & M.C.B. panel box etc. as per requirement of site and direction of engineer in charge etc. complete