Beautification and repair work in treasury office in Kannauj district

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete (As per chap.13 -S.l.code no .13.88 of D.S.R)

Earth work in excavation by mechanical means (Hydraulic excavatory manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.(code no 2.6 of DSR)

1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)(As per chap.4 -S.l.code no .4.1.8 of D.S.R)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in::(As per chap.6 -S.l.code no .6.4.1of D.S.R)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(As per chap. -S.l.code no .13.80 of D.S.R)

12mm thick cement Plaster with cement mortar in proportion of 1:4 cement and corse sand in single coat on fair side of single or half brick wall for interior plastering including arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in grit and finished even and smooth.(As per chap.13 -S.l.code no .13.4.1of D.S.R)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm( code no. 13.48.1 of DSR)

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5 mm nominal size derived from natural sources)(As per chap.4 -S.l.code no .4.10 of D.S.R)

Providing and fixing 25 mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Code no 9.7.7.1 of DSR