Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹30.7 L+₹22,465 (0.74%)Rejected-Finance C O MR M K BHOWMIK NEAR TAPAN VARIETIES JOYNAGAR 06 AGARTALA TRIPURA W 799001 | WEST TRIPURA | TRIPURA | 799001 | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹30.9 L+₹33,451 (1.10%)Rejected-Finance | L3 | Rejected-Finance Higher bid value |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF REFRIGERATOR DEEP FREEZER AT RAJBARI AREA DIMAPUR AND RMS AND REPAIR MAINT OF ELECTRICAL HOT WATER APPARATUS GEYSER AND REWINDING OF CEILING EXHAUST FANS WITH ALL ACC ESSORIES AT DIMAPUR
2022_MES_543693_2
8483/C/E8
Open Tender
Electrical and Maintenance Works
Item Rate
334 days
RANGAPAHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹58,000
19 Nov 2022
12 Oct 2022
3 Nov 2022
12 Oct 2022
1 Nov 2022
20 Oct 2022
12 Oct 2022 - 19 Oct 2022
60 days
Amount
Servicing of Refrigerators of 165 to 195 ltr capacity single door of any make / model by Cleaning of condensing coil with wire & brush to remove dust including checking of electric circuit for smooth functioning of Refrigerators (unserviceable spares required to be replaced shall be measured paid for separately under respective items.
All as per item no 1.00 here-in-before but for double door Refrigerators.
Servicing of Deep fridger upto 460 ltr capacity 2/3 door of any make / model by Cleaning of condensing coil with wire & brush to remove dust including checking of electric circuit for smooth functioning of Refrigerators (unserviceable spares required to be replaced shall be measured paid for separately under respective items.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 2.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 2.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make: Richa/KEI/RR Kable/Havells/Finolex Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor
Disconnect and remove unserviceable Deep frezzer/Refrigerator compressor and supply and fix new sealed rotary / reciprocating compressor with built-in OLP, thermostat including brazing the suction / discharge lines suitable for existing model of filling the gas and testing on all as specified and directed by Engineer - in - Charge following cooling appliances. Make : Kirlosker/Tecumseh/ Sriram/ Voltas (other unserviceable spares required to replace with AC compressor shall be measured & paid for seperately under respective items)
For 90 to 195 ltr capacity
for 200 to 410 ltr capacity
Supply & charging the gas refrigerarent R-134 or as existing No to Refrigerators up to 195 ltr capacity including removing of leakage if any and testing complete all as specified & directed by Engineer-in-charge
All as per item No 8.00 here-in-before but for 200 ltrs to 410 ltrs capacity
Note for Item No 8.00 & 9.00 :- (i) Gas quantity will be measured physically by weighing gas cylinder before filling and after filling. (ii) Suitable weight machine for measuring gas quantity shall be provided by contractor and cost is included.
Disconnect and remove unserviceable Deep frezzer/Refrigerator PCB and supply and fix new PCB suitable for existing model of following cooling appliances, all as specified and directed by Engineer - in - Charge. Make : Kirlosker/Tecumseh/ Sriram/ Voltas/Carrier.
Upto 195 ltrs
200 to 410 ltrs
Disconnect and remove unserviceable Refrigerator coolling chamber and supply and fix new colling chamber suitable for existing model of following cooling appliances, all as specified and directed by Engineer - in - Charge. Make : Kirlosker/Tecumseh/ Sriram/ Voltas/Carrier.
Upto 195 ltrs
200 to 410 ltrs
Taking down unserviceable condensing coil unit and supply and fix new condensing coil unit suitable for Refrigerator of capacity upto 310 Ltrs complete all as specified and directed by Engineer-in-Charge
M & L for Fan Motor of suitable for refrigerator/deep freezer
Upto 195 ltrs
200 to 410 ltrs
M&L for replacement of the following parts/items of refrigerator/Deep Freezer 90 ltr upto 410 ltr capacity, and desert coolers etc complete all as specified and directed.
Supply and fixing in replacement of Starting capacitor of capacity 10 MFD/20MFD. Make : Asian/Keltern/Unistar/EPSCO/Keal/as per existing
Supply and fixing in replacement of Running capacitor of 30 MFD/36 MFD capacity. Make : Asian/Keltron/Unistar/EPSCO/Keal/as per existing
Supply and fixing in replacement of Running/Fanmotor capacitor of 4 to 6 MFD. Make : Asian/Keltron/Unistar/EPSCO/Keal/as per existing
Supply and fixing in replacement of Starting relay open type for refrigerator Make: Renutral/Shriram/Indfoss/as per existing
Supply and fixing in replacement of Overload protector for refrigerator Make: Renutral/Shriram/Indfoss/as per existing
Supply and fixing in replacement of Thermostat for Refrigerator Make : Renutral/Shriram/Indfoss/as per existing
Supply and fixing in replacement of Wiring kit for Refrigeration/Deep Freezer
Supply and fixing in replacement of Refrigerator/Deep freezer filter
TSupply and fixing in replacement of imer switch suitable for refrigerator/deep freezer of capacity 90 to 410 ltrs. Make - LG,Whirlpool, bluestar
Supply and fixing in replacement of Door gasket with magnetic strip for upto 195 ltrs refrigerator
Supply and fixing in replacement of Door gasket with magnetic strip for upto 410 ltrs refrigerator/deep freezer
Supply and fixing in replacement of Biometal for Deep freezer/Refrigerator
Supply and fixing in replacement of sensor
Supply and fixing in replacement of Pin type / screw type bulb suitable for 90 ltr to 360 ltr. Refrigerator (Make : Philips).
Supply and fixing in replacement of Door switch 230 volt.
Flushing and leak testing the complete system Refrigerator and deep freezer with nitrogen gas and making good leaking portion by brazing and topping up compressor oil complete all as specified and as directed by Engineer in charge. Note: Cost of brazing and topping up of compressor oil is deemed to be included in quoted rate.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store.
Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed by Engr-in-Charge
Dismantling and taking out burnt copper winding from ceiling fan of sweep 1200mm any make, model, type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of ceiling fans work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured and paid under respective
All as per item No 18.00 above but ceiling fan of sweep 1400mm
Dismantling and taking out burnt copper winding from wall cabin fan/table fan of sweep 350/400 of any model any make, any type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of Wall cabin fan/table fans work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured and paid under respective.
Dismantling and taking out burnt copper winding from Exhaust fan 200-400mm sweep of any model any make, any type and rewinding the same with new super enameled copper wire of similar gauge and number of turns as exists for full speed, including cleaning and greasing of bearing/bushes, taping, varnishing, heating and replacement of defective parts and reassembling of fan motor and refixing the fan after testing complete to the entire satisfaction of the Engr-in-Charge. Note:- Contractor shall arrange repair/rewinding of Exhaust fan 450mm sweep work in RMS/Dimapur area with suitable winding machine and connected acessories. Spare parts shall be measured and paid under respective items.
Preparation of old painted surface of Exhaust fan of any sweep, model and make by using chemicals, wire bush, etc to make smooth surface and apply two coats of synthetic enamel paint (first quality) by spraying similar to existing colour of the Exhaust fan, motor, blades (set of 3), complete all as specified and directed.
Taking down and Supply and fixing PVC Exhaust fan PVC 150 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge. Make : Bajaj/CG/V-Guard Note : Old Exhaust fan deposit to MES AGE(E/M) Store.
All as per item No 23.00, 200 mm sweep single phase 50 Hz AC complete all as specified and as directed. Make :Bajaj/CG/V-Guard
All as per item No 23.00, 250 mm sweep single phase 50 Hz AC complete all as specified and as directed. Make :Bajaj/CG/V-Guard
Fan capacitor of capacity 2.5 MFD (Make: Universal/Usha)
Fan capacitor of capacity 4.0 MFD Make: Universal/ Usha.
Ball bearing/Bush bearing suitable for ceiling fan, of any sweep. Make of bearing-TATA,NBC,SKF (6201to 6204)
Fan clamp MS including nut, bolt, rubber reel, split pin complete of suitable size 1200/1400 mm
Flexible wire, copper conductor,Twin twisted multicore cable 2 core High Quality twin core flat wire of size 40/.0076 Sqmm wire. Make Plaza/Richa/RR Kabel
Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two
Ceiling fan 1200mm Sweep Rotor ring reel small/big size all as directed by Engr-in-Charge.
Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long
Dismantling of storage type water heater (Geyser) of 25/35/50 ltrs capacity, any make, vertical or horizontal type, mounted on wall by disconnecting electric and water supply connection and keeping the same in safe custody for carrying out necessary repair/replacement of UNSV parts/components including descaling of the geyser tank by using proper liquid chemical and re-assambling & refixing the same all as directed by the Engr-in-Charge. (Note: UNSV items for renewal shall be measured and paid seprately under respective itme here-in- after as supply only). Make: Jilco/Havells/Indosian/Bajaj/CG
Supply & fixing following items for water heater and geyser of any type model and make all as directed by Engr-in-Charge.
Rubber washer for geyser fixing complete all as sp[ecified and as directed.
Heavy duty PK Aqua 2 feet hot water connection for geyser hose pipe both cold/hot of set water line with adopter and washer at both ends of the pipe.
Indicator lamp round/rectangular complete all as specified and as directed.
Thermostat for geyser 30 to 75 degree centigrade. Make: Thecha/DasPass/Victor
Auto cut-off electric water heater geyser temperature controlling sensor any capacity complete all as specified and as directed.
Push type copper heating element of 1.5 KW capacity complete all as specified and as directed..
All as per item No 35.06 above but push type 2.00 KW capacity complete all as specified and as directed.
Glass wool in between outer cell and containercomplete all as specified and as directed.
Inner container for geyser of capacity 25 ltr, any make any type complete all as specified and as directed.
Inner container for geyser of capacity 50 ltr, any make any type complete all as specified and as directed.
Assemblly for water heater 25 ltr capacity of any make and type complete all as specified and as directed.
Assemblly for water heater 50 ltr capacity of any make and type complete all as specified and as directed.
15 Amp plug Top suitable for 15 amp socket complete all as specified and as directed.
2.5 sqmm 3 core copper cable connecting for plug top to Geyser complete all as specified and as directed.
Cleaning of geysers any type and size/make all as specified and directed by Engr-in-Charge.
Fixing only Geyser of any capacity, complete with etc and all accessories and connection Note : Geyser will be issued from E/M store free for fixing
Supply & fixing for Element Assembly (Glass coated ) suitable 25 Ltrs (GL WH models) including taking down complete all as specified and as directed. Make : Bajaj or equivalent
S & F of metal fasteners of 12mm dia for fixing geyser complete as specified and as directed. Make : Anchor
S&F for DBOXx MCB protected socket pvc plastic base of size 46.5 x42.8 x26 CM with single pole MCB 25 Amps complete all as specified and directed.
SHRI SUBRATA GUHA
P K ELECTRICAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .