WBPWD/HESD-I/ NIeQ-03/ 2023-24

Amount

Distribution wiring in 1.1 KV grade 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 19mm bore, 3mm thick polythene pipe to light/fan/call bell points with Modular type switch(Brand approved by EIC) as per GS with following average run.

8 Mtr. [ 2(iii) / E- 20 ]

Distn. wiring in 3 X 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point as per GS with following average run.

On Board [ 4 (a)(i) / E- 10 ]

S & F PVC rigid conduit (Precision mk) on wall with saddles as per GS.

20 mm size [ 7(a)/ E- 16 ]

25 mm size [ 7(b)/ E- 16 ]

Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.

19 mm dia 3 mm thick [ 3 (a)/ E- 2 ]

25mm dia 3 mm thick [ 4 (a)/ E- 2 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS.

3 x (1.5 sqmm) [1(b) / E- 9 ]

2x(2.5 sqmm)+1x(1.5 sqmm) [ 1(s) / E-9 ]

S & F solderless Copper socket by crimping of Copper wires.

a)1.5 sq mm

b) 2.5 sq mm [9(i) / F-5]

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Nicco / Gloster/KEI/Polycab]

2 Core 10 Sq. mm [ NS ]

Laying of cable after cutting floor/pavement/wall as per GS for the following Sizes.

2.5 to 35 Sq. mm [ 5(i)/ F- 3 ]

Laying of cable in underground trench as per GS for the following numbers of Cables.

Upto 35 Sq. mm [ 1(a)/ F- 2 ]

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS.

2Core 10 Sq. mm [7(c)/F4 & 8(b) /F5]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[21 / E-6]

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [4(a) / E-17]

Supply and delivery of single/twin Industrial LED Batten luminaries incl. Supply of 1 no./2nos. 18W LED Tube

Single fittings [Philips make Cat No. TMC-501 P1xT-LED 22W P3241 or equivalent make CG / Bajaj / Wipro] incl. 1 no. 18W Master LED Tube

Twin fittings [Philips make Cat No. TMC-501 P1xT-LED 22W P3242 or equivalent make CG / Bajaj / Wipro] incl. 2 no. 18W Master LED Tube

Supply of ceiling fans complete with all accessories without regulator ( Make -Orient-New breeze/CG- Aura Metallic/Usha-Striker Plus)

a. 1400 mm Sweep

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS [ 21 (a) / C-3 ]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [16/C-2]

Supply & Fixing of 240V, 72 W LED Street light luminarie complete with all accessories and equipped with IP66 Protection (Crompton-Cat no.-LSTP-120-CDL or equivalent model of Philips/Bajaj//wipro/Magik) on existing MS Pipe/Mini Pole as per direction of E.I.C

Supply & fixing 450mm sweep wall bracket fan(high speed) with metal body & blades(Orient - Wall-II Tornado,or equivalent cat of CG/EPC/Cinni) with necessary wooden board on wall with nuts, bolts, washer etc.

Supply & fixing heavy duty Exhaust fan(Make-EPC] of followinng sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust incl. s&f louver shutter as per G.S. )

9"( 230mm ) Speed 1370 RPM [NS]

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS

Add GST @18% Rs.

Add LWC @1% except item no.- 7,13,14:- Rs..

R.K. ENTERPRISE

RAKSHIT CONSTRUCTION