Renovation work of Inspection house at Kasia Irrigation Division, Kushinagar in Distt.- Kushinagar.

Amount

Renovation work of Inspection house at Kasia Irrigation Division, Kushinagar in Distt.- Kushinagar.

CIVIL WORK

Dismantling jack arches and berjas roofs including roof concrete & including stacking of dismantled materials within a distance of 60 meters (200feet) But only Roof Concrete

Dismantaling Reinforced brick Slab including stacking of dismantled materials within a distance of 60 meters (200 feet)

Dismantling brick work in cement mortar and including stacking of materials within a distance of 60 meters (200feet)

Dismantling existing plaster including disposal of refuse within a distance of 60 meter (200 feet)

Racking out joints of brick work in cement or lime mortar to a depth of 1 cm, (3/8") including disposal of refuse within a distance of 60 meter (200 feet)

Dismantling door or window including chaukhats with hold fasts and including stacking of materials as within a distance of 60 meters (200feet)

Dismantling door or window leaves including stacking of materials with in a distance of 60 meter (200 feet)

Concrete with cement ,coarse sand and 40mm gauge stone ballast (1:4:8) in foundation including cost of all materials labour, tools and plants etc. required for proper completion of work.

First class brick work in 1:4 CM in super structure /Foundation including necessary cutting and moulding of bricks rquired and also including honeycomb brick work, supply of all material labour and tools and plants etc. required for proper completion of work but thickness of wall is one brick (230 mm) .

R.C.C. work with cement, coarse sand and approved stone ballast in the proportion 1:1.5:3 in R.C.C. Slab, including cost of all materials labour and T & P required for proper completion of the work.

Cutting,Bending and binding of steel including Cost of all material labour and T & P.

Providing and laying "Brick Coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm. x 30 cm. and side wall parapet shall be mono tythic plaster wall upto 30cm. higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water pooring compound @ 2.00% by weight & including S/o all material, labour T&P etc. complete for proper completion of work.

Providing and fixing pressed steeldoor frames confirming to IS:4351,manufactured from commercial mild steel sheet of 1.25mm thickness ,Including hings,jambs,lock jamb,bead and if required angle threshold of mild steel angle of section 50*25 mm ,or base ties of 1.6mm ,pressed mild steel welded or rigidly fixed togther by mechanical means ,including MS pressed but hinges 2.5mm thick with mortar guards,lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatement of surface fixing with adjustable lugs with split and tail to pitch jamb.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Providing and fixing 30 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smoth outer integral skin having 71 mm width & 28 mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI 'C sections (39mmx19mmx0.60mm thick) or MS pipe (40mmx20mm) stiffener frame insert & telescopic polymeric 'L' corners. the panel shall be filled with 3 mm mm thick high - pressure compact laminate as per manufacture's specifications and directions of the engineer in charge, cover moulding shall be provided for covering fixing screws and elegant look. (For W.C. bathroom door shutter) .

Providing & fixing of Sliding door bolts Aluminium (300x16mm)

Providing & fixing of Tower door bolts Aluminium (150x10mm)

Providing & fixing of door handle Aluminium 100mm long

Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Z-sction windows (ISI marke) or Z- tubler window made of gold rolled formed continous seam welded M.S. tubler box section made from corrosion resistant coated conforming to IS: 513=1973 size of welded tubuler Z-profile and T profile are glzing bars jointed mitred and flush but welded and lugs 100 mm long of 19 x 3 mm size embedded in cement concrete blocks 150 x 100 x 100 of 1:3:6 cement approved coarse sand and 20 mm nominal size of dalla stone aggregate or with plugs and screws required including fixing 4 mm thick glass panes with glazing and special metal sash putty of approved make complete including M.S. oxidised casement fastercer (125 mm length weighting not less than 240 gms) and box type hinges 65 mm length 2.5 mm thick galvnised pin of 6 mm dia and aplying a priming coat of approved steel primer.

Fabrication and supply of M.S. grill as per approved design and drawing including the stair case railling etc. with square bars, m.s. angle iron, and m.s. flat iron as per direction of Engineer-incharge, supply of steel and its wastage, cutting, drilling holes and welding joints where necessary including each joint tube perfectaly welded and jointed and grinded to smooth finish.

Fixing panes of glass with and including putty and brads and including supply of all material labour and tools plants etc. required for proper completion of the work, but excluding cost of glass. 3.8 to 4.7 mm thick

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm

12.5 mm thick plaster with cement mortar consisting of(1:3) 1 part cement and 3 part approved coarse sand minimum thickness not to be less then 10mm including supply of all materials, labour and tools and plants etc. required for proper completion of work.

12.5 mm thick plaster with cement mortar inproportion of 1:6 cement and C/sand over brick work minium thickness not be less than 10 mm including supply of all materials, labour and T&P etc. required for proper, comletion of work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.5% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300*300 mm.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm

Supply and fixing of 6mm thick china white glazed tiles (ceramic tiles) in flooring/ skirting/dado with 1:3 cement and approved coarse sand mortor joints finished with white cement etc.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

One priming coat of cement primer and two coats oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm):

Painting Two coat with priming coat (but excluding cost of priming cost) on wood or steel and other metal surface with superior synthetic enamel standard make brusing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter and papering and stripping including cost of all material, labour, T&P etc. required for the proper completion of the work. but for every subsequent coat after first coat on wood or steel surface with paint of (iii) Superior quality.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (110 mm diameter)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single push fit Coupler 110 mm

Bend 87.50 110 mm bend.

Shoe plain 110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50m and lead upto 30m. and including filling, watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth .

40 mm thick 1:2:4 cement conc. Flooring with cemnet, approved coarse and 2 cm. Graded approved stone balast laid in planels finished with 3 mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specific over and iremoving any overlapping mortar at the joints of the panels if any giving them of all materials, labours, T& P etc. required for proper completion of the work.

1st class brick work in 1:6 cement mortar including all cost of materials,T&P and labours etc.

Providing M.S. foot rests (Step) including fixing in manholes with 345x345x150 cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar.

Providing and fixing 100 x 100 x100 mm single equal plain junction of required degree :Sand cost iron of 100 mm diameter.

Providing and fixing 100 mm dia Sand cast iron Pipe for in let and out let trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors .

Providing and fixing plain Sand cast iron 100 mm diameter bend of required degree.

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :

Providing filling brick bats mm brick ballast

Providing filling 63-40 mm brick ballast

Providing filling 40 mm brick bats

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter

Providing and laying of factory made 80mm thick rubber moulded Interlocking cement Concrete tiles (30mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/laying of interlocking tiles leveling & dressing of surface to required level &slop, filling joints with fine sand including the cost of material,labour and tools and plants etc. required for proper completion of the work.

Centering and shuttering for R.C.C. & P.C.C. work including all cost of materials,T&P and labours etc. finished.

colour washing one coat using approved colour material including supply of material and T&P etc. require for proper complition of work.

Mild steel or iron work in heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. wrought to required form, including drilling holes riverting or welding where necessary & their fixing, required for proper completion of the work.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, (I) 100 mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, (I) 100 mm nominal size dia

Earth filling inclunding loading unloading filling leveling compacting and dreesing with all t&p etc.

Supply and fixing of finolex of copper cable ISI marked submersible cable of size 4 sq mm N.S

Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.

Wiring point for 5 amp Plug with 141( B) but in PVC conduit with 1.5 sq. mm FR PVC insulated multisrand copper conductor cable as earth wire drawn inside the conduit.

Wiring point Exhaust fan with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVCl conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling roase on 3 mm. thick bakelite sheet etc, complete in all respect including matching colour wash.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 1.75mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

As in item 221 (B) but in 20 mm dia (2mmthick) PVC conduit with one no. 2.5 sq. mm for PVC insulated multisrand copper conductor cable as earth wire drawn inside the conduit.

Supply and wiring of submain in PVC insulated 1100 V grade single core Copper conductor cable in heavy gauge rigid PVC conduit partly laid in slab along with reinforcement before concreting with 8 SWG GI earth continuity wire etc. complete in all respects.

Supply and wiring submain with two number As in item no. 219(B) but in 25 mm dia heavy duty (2 mm thick) PVC conduit with one number 10 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and fixing of single light wall bracket on matching M.D.F.E.G. board base etc. complete all respect.

Supply and fixing of factory fabricated M.S. box in existing sunk of size 600mm x 480mm x 200 mm deep with godrej type almirah, cover with handle etc. fabricated from 18 SWG (1.25mm) M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and D.P./T.P.N. fixing arrangements and provision for compartment for loose wires openable housing on the top and hold fast etc. including supply of all material, labour, T&P etc. required for proper completion of the work.

Erection and testing of ceiing fan and regulator for room height upto 3.5 meters including supply of 3 mm thick G.I.P. pipe 19 mm dia. Duly painted, complete in all respect.

Supply & fixing of 40 Amp. 4 pole MCB (10KA)

Supply and fixing of polished MDFEG/ Teak ply cover for surface type B.D.B. above 4 ways complete with 50 mm hinges, aluminium kunda, chhapka and handle etc. complete in all respect.

Supply and fixing 16 gauge M.S. drum duly painted including making hole in the wall for exhuast fan and finshing properly complete in all respect.

Construction of recess pf 600mm x 480mm size of main boards, distribution boards of all sizes including cutting of brick work, providing lintel of suitable size and thickness, plastering etc. with supply of all material labour T&P required for proper completion of the work.

Supply and fixing of electronic fan regulator (Modular) 120-280 V. ISI maked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of engineer in charge of work.

Supply & fixing surface/flush mounting 6ways VTPN disribution board with additional metal without MCB complete in all respect,.

Supply and fixing of 240 volts 'L' series miniature circuit breaker in existing MCB, DB complete with connections as required.

Supply and fixing of MCCB (16KA) Thernal Magnetic release.

S&F surface/flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect,

Supply and fixing of LED fitting suitable for 1x22 watt tube light complete including tube etc. on surface complete in all respect. Cat AAA

Supply and fixing of 36 watt indoor recess mounting LED Square Fitting for arnstrong ceiling having powder coated die cast aluminium housing with body with extended heat sink, diffuser of polycarbonate material and driver set complete in all respcet.

Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc. complete (Make : Bajaj/Crompton Greavs) 1400 mm sweep

Supply of AC 230/250 volts, 50 HZ exhaust fan including providing nuts, bolts, mounting frame and other accessories etc. Complete (Make : Bajaj/Crompton Greavs)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, 78 mm and effective height of 88 mm, weighing not lesswidth than 190 gms.

Providing and fixing terminal guard 75 mm DIAMETER : Sand cast iron S&S .

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of 75 mm diameter :

Providing and fixing Slotted Cowl guard in the 75 mm dia.Ventilater pipe.

Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore 45 cm long Wash & Cistern.

Providing & fixing soil, waste and vent pipes.

(a) 100 mm dia centrifugally cast iron S & S pipe.

(b) 75mm dia centrifugally cast iron S & S pipe.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Exposed on wall

(a) 20 mm dia nominal bore

(b) 25 mm dia nominal bore

(c) 40 mm dia nominal bore

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall for 15 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete for 25 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

(a) 25 mm dia nominal bore

(b) 40 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Capacity (500*2)

Providing and fixing brass stop cock of approved quality for 15 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 for 15 mm dia nominal bore

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

(a) 100 mm diameter

(b) 150 mm diameter

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m for Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design for 100 mm diameter S.W.Pipe

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 150mm dia DSR 23.1.1

Supplying, filling, spreading & leveling p gravel of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc.,

Supply and fixing mosquito proof jali with sheesham wood batten around the jali including the ocst ofjali, buton, nails, screws etc.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of :

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Providing and installation of voltas 1.5 ton split invertor air conditioner

White Vitreous china flat back wash basin size 550x400mm with single 15mm C.P. brass pillar tap

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

PUMPING SET KSB make submersible pump set suitable for installation in bore well of min 110 mm inner dia preferably more and having under noted specifications.[2.0 H.P.} NS