WELCOME MAINT AND PERIODICAL SERVICES TO CERTAIN BUILDINGS IN RESIDENTIAL AREA AT RCI HYDERABAD UNDER GE I RD RCI HYDERABAD

Amount

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:4, on other than fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:6, on other than fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, 5mm thick rendering in cement mortar 1:3, on ceilings of concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, preparation of plastered surfaces of walls and applying water proof external wall care putty, including rubbing/grinding with sand paper and making surface even and smooth to receive external emulsion and applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer all as per manufacturer's instruction complete all as specified and as directed.

M&L, preparation of newly plastered ceiling and wall surfaces and applying two coats of OBD over a coat of 1mm thick putty complete all as specified and directed.

Complete removal of existing treatment from externa/ internal surfaces of walls , scrapping, rubbing/wire brushing, sand papered and watering with jet etc., and applying

M&L applying one coat of water proof wall care putty, 1.5 mm thick (average) including rubbing/grinding with sand paper and making surface smooth and even complete all as specified and as directed.

M&L applying a coat of alkali resistant primer on wall surfaces all as per manufacturer's instruction complete all as specified and as directed.

Preparation of old plastered surfaces of walls/ ceilings including cornices, pilasters etc., complete all as specified and directed.

M&L, for applying one coat of distemper oil emulsion complete all as specified and directed.

M&L applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed.

M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality on exernal surfaces of walls at any height , all as per manufacturer's instruction complete all as specified and as directed.

M&L, preparing old plastered surfaces of walls, ceilings, cornices, soffits of slabs and chajjas fins and facias etc., and applying one coat of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality all as per manufacturer's instruction complete all as specified and directed.

M&L, French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and as directed.

M&L, Writing letters or figures (Block Roman, Italic or Indian) not exceeding 30cm high using synthetic enamel paint of approved tint complete all as directed.

Dismantling/ Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as directed.

M&L Plain cement concrete 1:2:4,type B1 (20mm graded stone aggregate), 30mm thick as in floors, finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L, light coloured vitrified tiles( double charge) in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:6 laying in floors complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 9 to 10mm thick light coloured vitrified tiles in skirting of size 600 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L, 7 to 8mm thick 300 x 300mm coloured, joint free Non skid ceramic tiles, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:6 laying in floors complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, coloured glazed ceramic tiles of size 450 x 300mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size exc 0.18 sqm but n exc 0.38 sq each tile400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and as directed. Note: Shade, design/pattern of tiles shall be as approved by GE

M&L, 20mm thick, approved pre polished black Granite work (of any type, factory polished) edges rounded in steps (single piece), cooking platform and the like laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, demolition of stone slabs of any thickness and description in floors and removing debries off the premises complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin white 550x400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size including removal of debries off the premises complete all as directed

S&F in repairs, stainless steel sink 1mm thick kitchen or laboratory with plugs, washers and waste pipes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600 x450mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, stainless steel plate rack of 0.63mm thick, of size 36" x 36" x 10" load capacity not less than 30Kg complete all as specified and directed.

S&F in repairs, plastic water closet seat cover, white, closed pattern with recessed bottom and cover aluminized hinging device complete all as specified and directed.

S&F in repairs, mild steel chromium plated towel rail, 'D' shaped, 20mm dia, 600mm long, premium quality complete all as directed.

S&F in repairs, glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing, 60cm long, complete all as specified and directed.

S&F in repairs, 32mm dia PVC waste pipe with fittings for fixing to WHB and kitchen sinks of suitable length as per site requirement and including taking down old waste pipe complete all as specified and directed.

S&F in repairs, 32mm dia brass chromium plated waste coupling fittings for wash hand basin etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls and making good, ducts/ceilings or laid in floors complete all as specified and directed.

All as per item No 36 above but 20mm bore of pipe.

S&F in repairs, 15mm bore bib taps, long body, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron/GI pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, 125mm size chromium plated shower rose with or without swivel joint complete all as specified and directed.

S&F in repairs, chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar CAT No 573 or techno commercially equivalent in Hindware or Parryware/Cera

Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar including disposal of debris off the premises complete all as directed.

M&L, brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repaiors 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber all as specified and directed.

S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's

S&F Second class hard-wood in scantlings clean sawn any section complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish 30mm flap or electrogalvanised.

S&F in repairs, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples complete all as specified and as directed.

S&F in repairs, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F in repairs, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L in repairs, 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed to timber framework complete all as specified and as directed.

M&L in repairs, 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed to timber framework complete all as specified and as directed.

S&F in repairs, 19/20mm dia stainless steel ,medium grade curtain rod, including SS cantiliver brackets fixed to wall with rawal plug on both ends including complete all as specified and directed.

S&F in repairs, stain less steel end fancy holders of curtain rods 20mm holding dia with necessary tightening screw 65-75 mm long fixed in position complete all as specified and directed.

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but n.exc 4 Sqm complete all as directed.

S&F unplasticised Poly Vinyl Chloride (UPVC) 3-Track Panel Sliding Window Fusion welded joints (2 Glass Shutters, 1 SS Mesh Shutter) of 88mm x 52mm x 2.20mm with reinforcement of 1.2 mm thickness, Super sash with overall size 42mm x 60 mm x 2.20mm with reinforcement of 1.5 mm thickness for sliding window shutter frames capable of mounting glazing bead of appropriate dimension including 4-5 mm thick tinted glass and stainless steel wire cloth, 0.36 mm nominal dia and average width of aperture 1.40 mm including locks and handles. After fixing frame the gap between frame and the ajjacent wall shall be filled with weather proof silicon sealant complete all as specified and directed .

S&F of fixed louvered ventilator made out of multi chambered uPVC sections fusion welded joints with glazing bead with EPDM black gasket having isolated drainage and reinforced with galvanized iron profiles throughout the window. The outer frame having an overall size of (60mm x 36mm x 2.2mm)/(60mm x 58mm x 2.2mm) with reinforcement of 1.2mm thickness including 4-5 mm thick frosted glass and stainless steel wire cloth, 0.36 mm nominal dia and average width of aperture 1.40 mm. After fixing frame the gap between frame and the ajjacent wall shall be filled with weather proof silicon sealant complete all as specified and directed .

S&F in repairs, mild steel framed work such as grills, gratings, framing , framed guard bars and similar works using any section conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F in repairs first quality vitreous China wash down water closet pan (pedestal pattern), white, of size not less than 400mm x 400mm x 340mm (excluding fixing bolts, flushing cistern and flush pipe) but including provision of plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, 10 litres, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

vvcenterprises (BID ID -3313327)

shyam engineerings (BID ID -3311717)

SUN LIGHT HOUSE (BID ID -3310537)

MM PROJECTS (BID ID -3313316)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3310549)

SRI SAI ENTERPRISES (BID ID -3310654)

Maruthi international (BID ID -3310466)

M/s K Venkateswara Rao (BID ID -3311900)