ANNUAL MAINT OF OTM ACCN AT NCC DTE BLDGS AND NCC OFFRS MESS UNDER GE CHENNAI

Amount

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including pipe fittings and including taking up or down in the existing pipe line complete all as specified and as directed for pipe of 20mm outer dia.

All as per item No.1 above but for25mm outer dia bore

S&F in repairs 15mm dia bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm PVC connection 450mm long of superior quality complete all as specified and as directed.

S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed complete all as specified and as directed. (min. weight 20mm-210 gms)

S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) but including connections to flushing pipe and outgoing pipes complete all as specified and as directed.

S&F in repairs vitreous china wash basin of oval type including waste coupling, waste pipe and brackets etc complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction complete all as specified and as directed

S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs angular stop cock 15 mm dia brass chromium plated fancy type with long shank, screwed down high pressure with crutch or butter fly handle screwed down both ends for iron pipe or for union of make that shall match with existing fitting i.e, jaquar complete all as specified and as directed.

S&F in repairs toilet paper holder with flat recessed type matt chromium plated complete all as specified and as directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/Colour CP) complete all as specified and as directed.

S&F in repairs health faucet (hand shower with 1 M flexible tube with wall hook, chromium plated complete all as specified and as directed.

S&F in repairs towel rail 600mm long between flanges, chromium plated complete all as specified and as directed.

S&F in repairs for 15 mm bore sink cock with swinging spout wall mounted model with wall flange complete all as specified and as directed.

S&F in repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs, washers and wastes, including beading in cement mortar to dwarf of including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as specified and as directed. Make : NIRALI/JAYNA/DIAMOND/ PARRYWARE

S&F in repairs plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets of of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed.

S&F in repairs PVC waste pipe for wash hand basin (size 31/32mm x 800mm length)of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed.

S&F in repairs PVC waste pipe for Sink waste pipe (size 38/40mm x 1150mm length)of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed.

Supply and fix CP overhead shower ABS round with 225 brass arm & flange of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed.

S&F in repair 15mm dia two way bib cock with flange, chromium plated of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed.

S&F in repairs corner glass shelf 300mm superior quality matt finished chromium plated (MCH/Colour CP ) with bracket and fittings complete all as specified and as directed.

S&F in repair PVC cabinet mirror PTMTof size 400 x 500mm with sided shelves fancy type of superior quality of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipes complete all as specified and as directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipes complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

S&F in repairs Rotational moulded polyethylene water tank cover any capacity tank including hinge device and locking arrangement complete all as specified and as directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls /floor etc complete including dismantling existing pipes complete all as specified and as directed.

S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete etc including dismantling existing pipes complete all as specified and as directed.

S & F in repairs PVC (SWR) bends with oval access door 110mm complete all as specified and as directed.

S & F in repairs PVC (SWR) bends with oval access door75mm complete all as specified and directed.

S & F in repairs PVC (SWR) vent cowl 110mm complete all as specified and directed.

S & F in repairs PVC (SWR) junction single (single T ) equal or un equal with access door 75 mm complete all as specified and directed.

S & F in repairs PVC (SWR) junction single (single T ) equal or un equal with access door 110mm complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L PCC 1:4:8, Type D2 (using 20 mm graded stone aggregate), 75 mm thick, as in sub base complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for fly ash old size brick work straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and as directed.

M/L sand filling under paver blocks including watering and consolidation complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block 60mm with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed.

S&F for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors Pattern, size and shade pointed with grey cement and pigment complete all as specified and as directed.

M/L Screed bed or bedding layer of mortar 15mm thk for laying floor finish in CM 1:6 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar of existing backing coat and screed removing serviceable tile to store and rubbish off the premises complete all as specified and as directed.

M&L for Vitrified Ceramic light coloured tiles in Patches of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Vitrified Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed.

M & L for non skid ceramic coloured joint free tile in patches 7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed coloured ceramic Concept designer tiles of 7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE, fixed in vertical surfaces in Patches such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thickcomplete all as specified and as directed.

M & L for ceramic mosaic exterior wall tiles of 10mm thick in multi colour and area not exceeding 0.18Sqm as approved by GE, fixed in vertical surfaces in patches such as in dado/ walls set and jointed in neat cement slurry and pointed in white or coloured cement to match tile over and including a backing coat in Cement Mortar 1:4, 10mm thick complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete wall / ceiling surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick in CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY

Supply only Liquid water proofing compound complete all as specified and as directed. (Make SIKA/FOSROC/CHOKSEY)

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

Dismantling plain or corrugated steel sheeting any gauge, any thickness, including nainital or similar pattern roof covering complete all as specified and as directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Steel work Fe- 410 in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S .1161- 1979 grade St.-240complete all as specified and as directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of weather proof acrylic emulsion paint (exterior grade, Apex ultima) on wall surfaces complete as per manufacturer's instructions all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coat of oil bound distemper on wall surfaces complete all as specified and directed.

M & L for preparing old decorated surface of ceiling by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying one coat of whitewash to ceiling complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed..

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exceeding 4sqm each including separating guard bars/grills/wire mesh etc.,complete all as specified and as directed.

S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and as directed.

S&F 4.0mm thick, figured glass pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from Aluminium section fixed with beads/glazing clips complete all as specified and directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames all complete all as specified and as directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs, complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed.

Demolition of Wall and ceiling boards, wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make that shall match with existing make i.e., GYPTECH/ARMSTRONG or equivalent complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc.,complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and as directed.

S&F Aluminium handles cast type anodised 150 mm size complete all as specified and as directed.

S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ventilator/partition, glazing clips with one or more tracks including joining cleats for fixing complete all as specified and as directed.

S & F for powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including 5mm thick tinted glass fixed with necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S&F in repairs aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width) using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc (The rate is inclusive of all fixings of builders hardware such as wiremesh hinges, bow handles, locking arrangements etc complete all as specified and as directed.

Repairs to aluminium door of any description including removal and refixing after replacement of the defective builders hardware/section, glass pane, prelaminated particle board, hydraulic door closer, stopper etc, and making the good to the original position complete all as specified and as directed.

S & F in repairs 9 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber / aluminium frame work complete all as specified and as directed.

M & L in repairs stainless steel curtain rods with L clamps and with suitable globe brackets and brass screws complete all as specified and directed.

S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including removing of old floor spring complete all as specified and as directed.

Cutting holes in brick/stone walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement or cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate for the required depth of embedded portion of holdfast or lugs measured from the face of jamb in to the wall exc half brick but not exc one brick complete all as specified and as directed.

S & F in repairs Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

M& L in repairs mortice lock vertical type size 100 mm 4 levers with stainless steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed.

Cleaning & removing all scale & dirt, etc. from tanks & from mouths of circulating pipes, etc in tanks of capacity .exc 500 & n exc 1000 litres complete all as specified and directed.

M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes suitable for modular switches, sockets etc concealed in walls for housing modular switches,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for :- one light point controlled by one switch

one fan point controlled by one switch

one 3 pin socket outlet 5 amps on the same board controlled by one switch.

one 3 pin socket outlet 5 amps on independent board controlled by one switch.

one light point controlled by two 2 way switches

one bell/buzzer point controlled by one bell push

As per above item No. 99 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated sheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade, drawn through and including new PVC casing capping, ISI marked, with accessories fixed on wall/ floor and ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick suitable for mounting modular switches, sockets regulators etc., concealed in walls including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc. incl taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed for the following:- :- one light point controlled by one switch

one fan point controlled by one switch

one 3 pin socket outlet 5 amps on the same board controlled by one switch.

one 3 pin socket outlet 5 amps on independent board controlled by one switch.

one bell/buzzer point controlled by one bell push

As per above item No. 101 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

S& F for modular cover plate with frame 2 module complete all as specified and directed.

S& F for modular cover plate with frame 3 module complete all as specified and directed.

S& F for modular cover plate with frame 4 module complete all as specified and directed.

S& F for modular cover plate with frame 6 module complete all as specified and directed.

S& F for modular cover plate with frame 8 module complete all as specified and directed.

S&F modular switches suitable for type AC 240V, 6 amps 1 module one way including taking down complete all as specified and directed.

S&F modular switches two way suitable for type AC 240V, 6 amps 1 module including taking down complete all as specified and directed.

S&F modular sockets outlets suitable for type AC 240V, 6 amps , 2/3 pin combined, 2 module including taking down complete all as specified and directed.

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete including taking down all as specified and directed.

S&F modular power sockets outlets suitable for type AC 240V, 6A/ 16A , 2/3 pin combined, 2 module including taking down complete all as specified and directed.

S&F modular fan step regulator 120W suitable for type AC 240V, 2 module including taking down complete all as specified and directed.

S&F modular bell switch suitable for type AC 240V, 6 amps 1 module including taking down complete all as specified and directed by Engr-in-Charge

S&F call bell of multi music type A/C 230 volts including taking down complete all as specified and directed.

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals including taking down complete all as specified and directed.

Supply and fix in repairs lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings straight/angle type as required including taking down old damaged lamp holder complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete including taking down ceiling fan and removing blades and fan body and depositing in store including connecting rod, cotter pins and all accessories complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including taking down exhaust fan and depositing in store complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m including taking down exhaust fan and depositing in store complete all as specified and as directed.

Supply and fix wall mounted fan of double string, steel body AC single Phase 230 V of size 400mm sweep with baldes, frame, louvres, oscillation control knob, tilting control and white colour (Body and blades) including taking down fan and depositing in store complete all as specified and as directed.

S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suit variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 36 Watts 2x2 ceiling COOL LIGHT a veratile 2X2 Recess mounted luminaires which provides soft-light and glare free symmetrical illumination, including taking down complete all as specified and as directed. Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or techno commercial equivalent in Philips/Bajaj.

S&F for 45 W new generation energy saving environmental friendly long life versatile pressure die cast aluminium IP-66 street light with high power LED as light source including taking down complete all as specified and as directed by the Engineer-in-Charge Make Havells ( ENDURASUNDOWNSL45WLED765PASYBOTG) or its techno commercial equivalent in Bajaj/Philips

S&F sub main wiring complete with two runs of 4 sqmm PVC insulated unsheathed single core multistrand copper conductor of 1100 volts grade drawn through and including new PVC casing capping alongwith accessories fixed on walls/floors/ceiling with one run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 4 sqmm + one run 4 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor of 1100 volts grade drawn through and including new PVC casing capping alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F sub main wiring complete with two runs of 10 sqmm PVC insulated unsheathed single core multistrand copper conductor of 1100 volts grade drawn through and including new PVC casing capping alongwith accessories fixed on walls/floors/ceiling with one run of 10 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 10 sqmm + one run 10 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

M & L for Sub main wiring complete with four runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with two run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down complete all as specified and directed. Note:- four runs of PVC insulated cable 6 sqmm + two run 4 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

M & L for Sub main wiring complete with four runs of 10 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with two run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down complete all as specified and directed. Note:- four runs of PVC insulated cable 10 sqmm + two run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

Supply/ fix PVC flexible pipe for electrical use, 32mm, heavy duty for passing wires/ cables fixed on wall or ceilings complete all as specified and as directed.

S&F SPN MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volts 6 way MCB DB, TPN including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F SPN MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240 volts 12 way MCB DB, SPN including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCCB fixed thermal & magnetic setting 415V, 4 pole, 50Hz of cap 100 Amps 16 KA including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed. Location : I/C for VTPN DBs

S&F MCB of rating 415 Volts, TPN 40 to 100 Amps, 10 KA C Curve complete all as specified and directed by Engr-in Charge including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of rating 240 Volts, SPN 40 to 63 Amps, 10 KA C Curve including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts C curve including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F of LED bulb 9 w high suitable for lamp holder including taking down unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make : Havells Cat No. LED PLUS 9W B22 CDL 2STAR LAMP or its techno - commercial equivalent in CG/ Philips /Wipro

S&F MCB Power unit with 4 module steel box consisting of 3 pin 24 Amps socket with Plug top and MCB SP 25 Amps, suitable for operation of AC & Geysers etc., including taking down unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including earth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete including taking down all as specified inlcuding testing on completion.

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3458392)

Sri Aruna Associates (BID ID -3463124)