PRODING COMPOUND PRECAST SLAB AND WATER SUPPLY ARRANGEMENTS WARD 26 ANGANWADI IN NELLIKUPPAM MUNICIPALITY

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Earth pit using machinery (Back Hoe), including Hire charges, fuel charges and Supply of Tree guard, Wooden cauge, green cloth, Guard stick and Manure (Fertilizer) including cost, conveyance, loading, unloading and all other labour charge etc., complete.

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supply and Delivery of Panel Size: 6 to 7 feet long, 1 foot high, and 40 to 50 mm thick.Wall Height: Built up to 5 to 8 feet high by stacking 5 to 7 panels vertically.Concrete Grade: Commonly M30 reinforced/prestressed concrete with steel bars.Pillar Type: Grooved I-beam columns anchored deep into the ground Including cost and conveyance of all materials etc complete as per standard specification

Erection and Installation of Precast / Pre-stressed Concrete Elements in correct and final position with proper line level and plumb at site making all arrangements (i.e. Cranes, Push-Pull Jacks and all other Tools & Plants for lifting, placing and alignment of elements, within erection tolerance as per IS:15916 as per approved shop drawings and all complete as per the direction of Engineer-in-Charge but excluding the cost of sim pads, non-shrink grout and steel works (i.e.) hangers.Upto 20.00 metre height

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.20mm PVC Pipe

32mm PVC Pipe

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S complete complying with standard specifications.32mm Dia Tee