Brand Type Unbranded

Supply , fixing, connecting, commissioning and testing of LT panel of suitable size, CPRI approved factory made, out door type (kiosk type), floor mounted, dust and vermin proof (IP 65 protection ), suitable for 1100 volts grade, 3 phase, 4 wire AC supply , fabricated out of 3.15 mm thick mild steel CRCA sheet mounted on usitable size angle iron and fixed to 50 mm x 50 mm x 6 mm angle iron frame and welded to 60 cm long 50 mm x 50 mm x 6 mm angle iron legs (04 Nos) , front and rear openable, double door type inclusive locking arrangement with provision of all incoming/outgoing cable entreis and epoxy powder coated over and including anti corosive treatment coat, duly fixed danger notice plate on front side, legs grouted in floor in PCC (1.2.4) bed block of size 30 cm x 30 cm x 30 cm, complete all as specified and directed, comprising the following including taking out old u/s panel. INCOMING (a)� Bus bar of aluminium, 300 Amps capacity, suitable size, TPN/4Nos, strips, duly sleeved with relevant colour code insulation 01 set. (b) Amp metter 0 to 500amps& with CTs and selector and switch digitial type 01 Set. (c ) Voltmeter 0 to 500Volts with selector switch digital type 01 Set. (d)�� Phase indicator RYB 01 Set. (e)�� MCCB, 100 Amps, 4 pole, 415 Volts, 50 Hz, AC,with rupturing capacity 36 KA 01 No.OUTGOING (f)MCCB 63 Amps, 4 pole, 415 Volts, 50Hz, AC, with rupturing capacity 25KA 03 Nos

Supplying, laying, jointing, testing and commissioning for PVC sheathed heavy duty electric LT cable XLPE PVC insulated armoured and with aluminium conductor 1100 volts grade of size 35 sqmm 3.5 core laid in trenches in floor, in ducts, through pipe or fixed along the poles complete all as specified and directed.Note. 1.�� Excavation, earth work, sand cushioning, and brick protection shall be measured and paid for separately. 2.� Rate of necessary lugs, thimbles and jointing material shall be included in unit rate.

Do same cable but of size 120Sqmm 3.5 core

Do same cable but of size 185Sqmm 3.5 core

Do same cable but of size 240Sqmm 3.5 core

Do same cable but of size 300Sqmm 3.5 core

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with a layer of sand 80 mm thick before laying of cable and 15 cm thick (punned down to 100 mm thick) after laying of cable in trenches/ducts complete all as specified. Note. Punned down thicknes(overall 18 cm) shall be considered for measurement and payment.