Supply and Construction of Integrated Gun Area (COW)

Supply and Construction of Comn Trench Construction Mtrl for Comn Trench Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja /Ultratech/ACC/ JK/Dalmiya)

Coarse sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40 mm graded

Water Proofing compoundconfirming to IS 2645-2003 (Make : Pidilite/Dr.fixit/ Fevicol)

Hard core 63-90 mm

Mild Steel Bars of size 12 mm dia conforming to IS 432 (Part I) 1982 (Make : TATA / SAIL /JSW)

GI binding wire (TATA / SAIL / JSW)

Wooden plank for shuttering Iind class wood of size 3.0X0.30X0.026

PBS Roll (20 mtr long, width 0.9 mtr) ISI marked with min weight 34 kg/Roll

Oil bound distemper incl primer. Make: Berger/Asian/Nerolac

Painting brush 4" (ISI Marked)

HDPE sand bags OG colour of size 0.75x0.375x0.15

Stone Boulder 9" to 12"

Black oil for shuttering

Nails various sizes

Wooden Logs for props of size 1.7 M long and 100 mm dia

Loop Holes 1000 x 300 mm (Make:-TATA / SAIL /JSW)

Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet of 1.00mm thick hold fast ISA 35x35x6mm and tower bolt 8mm dia 75mm long (Make:-TATA / SAIL /JSW)

Construction material for Sump (22 Nos) Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja /Ultratech/ACC/ JK/Dalmiya)

Coarse sand free from vegetation

Coarse aggregate 40 mm graded

Water Proofing compoundconfirming to IS 2645-2003 (Make : Pidilite/Dr.fixit/ Fevicol)

Hard core 63-90 mm

Painting brush 4" (ISI Marked)

PCC solid block 400x200x200 (+ 10 mm) minimum strength 50 Kg/Sqcm. PCC shall conform to IS-2185 (Part-I) 2005. Solid Block made out of PCC 1:3:6 having the compressive strength 5 KN/Sqmm

Grating for drain size 1 M x 0.95 M made out of outer frame of size ISA 40x40x5 MM thick and 8 mm dia bars at 25 mm gaping both ways

MS Pipe high grade of size 100 mm OD and 10 Foot long with MS flanges on both sides made out of 12 mm dia plate

Construction material for Water Staging of size 2.4 x 2.4 x 3.00 Mtr Height Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja /Ultratech/ACC/ JK/Dalmiya)

Coarse sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40 mm graded

Water Proofing compoundconfirming to IS 2645-2003 (Make : Pidilite/Dr.fixit/ Fevicol)

Hard core 63-90 mm

Bricks Sub Class 'B'

HDPE Water Tank Triple Layer, Capacity 2000L for storage of drinking water manufacture under rotationally moulded process using FDA approved grade of high density polyehylene enamel (HDPE) duly stebliazed for out door appliances produced in cylindrical vertical shape with manhole and shall be confirmed as per IS specification IS-12701 : 1996 (Make -Sintex/Polycon/Sheetal/ Supreme).

PPR-FR 3 layer Thermal pipe 32 mm outer dia PN/16 , Homogenous 03 layer pipe of outer layer green colour Ultra Violet (UV) stablized, Internal layer of white colour antimicrobially treated and PPR-FR Composite middle layer (Make : SFMC/Supreme/Fusion/KPT).

PPR socket 32 MM (Make : SFMC/Supreme//Fusion/KPT)

PPR union 32 mm (Make : SFMC/Supreme//Fusion/KPT)

PPR Gate Valve 32 mm (Make : SFMC/Supreme//Fusion/KPT)

PPR Elbow 32 mm (Make : SFMC/Supreme//Fusion/KPT)

PPR Tee 32 mm (Make : SFMC/Supreme//Fusion/KPT)

PPR Tank Nipple 32 mm (Make : SFMC/Supreme/ Fusion/KPT)

PPR Reducing socket 32-25mm (Make : SFMC/ Supreme/ Fusion/KPT)

PPR Pipe (PN-16/SDR 7.4) 25mm diameter (3 Layers-outer green UV stabilized, middle black and inner Anti microbial white colour) ISI Marked. (Make : SFMC/ Supreme/Fusion / KPT)

PPR Socket 25mm diameter. (Make : SFMC/Supreme/ Fusion/ KPT)

PPR Elbow 25mm diameter female threaded. (Make : SFMC/Supreme/Fusion/KPT)

PPR Union 25mm dia. (Make : SFMC/Supreme//Fusion/KPT)

PPR Tee 25mm diameter. (Make : SFMC/Supreme /Fusion/ KPT)

PPR Clamp suitable for fixing of 32mm diameter PPR pipe.(Make : SFMC/JINDAL/RELIANCE/KPT .)

PPR Clamp suitable for fixing of 25mm diameter PPR pipe. (Make : SFMC/JINDAL/RELIANCE/ KPT.)

PPR End cap 35mm diameter for PPR pipe. (Make : SFMC/JINDAL// RELIANCE/ KPT .)

PPR End cap 25mm diameter for PPR pipe. (Make : SFMC/JINDAL// RELIANCE/ KPT .)

No 8 x 32 CSK screw full threaded

No 8 x 50 CSK screw full threaded

CP Water Tap 25 MM (Make : Supreme/SFMC/Fusion)

PVC Float Valve 32/25 MM

Labour cost on Constr mtrl of Comn Trench, Sump & Water Staging

Supply and Construction of LMG Bkr/PD Constr Material Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja/Ultratech/ ACC/JK/ Dalmia)

Stone boulder 9" to 12"

Coarse Aggregate 40 to 63mm

Coarse sand free from vegetation

Coarse Aggregate 20mm graded

Coarse Aggregate 40mm graded

Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW

Water proofing compund conforming to IS 2645-2003 (Make:- Pidilite/Dr Fixit/Fevicol)

PBS Roll (20m Long , Width of 0.9Mtr ) (ISI Marked) with Min weight of 34 Kgs/Roll

GI binding wire (TATA/Sail/JSW)

Cement based paint (Snowcem) Make : Berger/Asian/Nerolac

Slack lime

Painting brush 4" (ISI Marked)

HDPE sand Bags khaki colour of size 30"x15" inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms/Bag

Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 (Make: Asian/Berger/Neroloc)

Synthetic paint enamelled OG conforming to IS 5-2004 (Make : Asian/Berger/Nerolac

Thinner. Make-Nerolac/Berger/Asian

Steel Items SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA / SAIL /JSW)

SRT 1840 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA / SAIL /JSW)

ISMB hot rolled 200x100mm and 4 mtr long. Make - TATA/SAIL/JSW

Prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner ISA 30x30x3mm as per drg. Steel shall conform to IS-800 (Make: Tata/Sail/JSW

Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW

Loop Holes 780 x 300 mm (Make:-TATA / SAIL /JSW)

Loop Holes 1000 x 300 mm (Make:-TATA / SAIL /JSW)

Loop Holes 1250 x 300 mm (Make:-TATA / SAIL /JSW)

Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet of 1.00mm thick hold fast ISA 35x35x6mm and tower bolt 8mm dia 75mm long (Make:-TATA / SAIL /JSW)

Shuttering & Nails Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m

Wooden scantling various size

Nails various size

Lightning Conductor Air terminal single pointed aluminium rod 12mm dia and 300mm long.

Testing point terminal block make of Gun metal & phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw.

Aluminium strips 25x3mm.

Galvanised iron strip 32x6mm.

Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal/ Tata/ Kalinga)

Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side.

CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame.

Insulating PVC block 75x75x30mm with insulating clamp nut & bolt (Make-Presto/Polycab/ Finolex).

Charcoal

Labour cost on Constr mtrl of LMG Bkr/PD

Supply and Construction of Comd Post (Bty) Construction Mtrl Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja / Ultratech /ACC /JK/Dalmiya)

Coarse sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40 mm graded

Coarse aggregate 40-63 mm graded

Stone Boulder 9" to 12"

Water Proofing compoundconfirming to IS 2645-2003 (Make : Pidilite/Dr.fixit/ Fevicol)

HDPE sand bag OG colour of size 15" x 30 "

Painting Brush 4" (ISI Marked)

Anti corrosive red oxide zinc chromate primer confirming to IS 5-2004 (Make : Berger/Asian/Nerolac)

Synthetic Paint enamelled OG confirming to IS 5-2004 (Make : Berger/Asian/Nerolac)

Thinner ( Make- Nerolac/Berger/Asian)

SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA / SAIL /JSW)

ISMB hot rolled MS 200 x 100, 3M (Make:-TATA / SAIL /JSW)

ISMB hot rolled MS 200 x 100, 4M (Make:-TATA / SAIL /JSW)

Polythene sheet colour less and weight of sheet shall be not less than 70gm/Sqm

PBS Roll (20m Long , Width of 0.9Mtr ) (ISI Marked) with Min weight of 34 Kgs/Roll

Prefeb mild steel door of size 900x 1700mm, outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner ISA 30x30x3mm as per drg. Steel shall conform to IS-800 (Make: Tata/Sail/JSW

Shuttering & Nails Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m

Wooden scantling various size

Nails various size

Lightning Conductor Air terminal single pointed aluminium rod 12mm dia and 300mm long.

Testing point terminal block make of Gun metal & phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw.

Aluminium strips 25x3mm.

Galvanised iron strip 32x6mm.

Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal/ Tata/ Kalinga)

Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side.

CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame.

Insulating PVC block 75x75x30mm with insulating clamp nut & bolt (Make-Presto/Polycab/ Finolex).

Charcoal

Labour cost on constr of Comd Post (Bty)

Furniture and Miscs Double Sleeping Bunk complete with plywood, matress and all connected accessories all as per Technical Specification.

Study chair of size length 56cm height 82 cm width 56 cm Lacqured finish with arm seat and back cushion velvet pholestry Make supreme or equivalent as per photograph of sample attached

Study table of size 4x2 wooden top on round tube structture with three drawers unit (As per photograph of sample attached)

Steel Bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec.

Water Dispenser of 230 V 500 Watts without refrigerator with normal cold and heating capacity of 5 Lts/ hour with storage compartment complete and auto shut off facility. (Make: VOLTAS/ LG/ USHA/Samsung)

Plastic dustbin of capacity 40 ltrs Make : NEELKAMAL/CELLO/SUPREME.

Solar System comprising of 1 x 500 Watt Monocrystaline PV Panel, 100Ah Solar Bty, Min 550VA AC/DC Inverter with inbuilt MPPT & Charge controller with and incl rechargeable led bulb 10Watt-02 Nos, Holder-02 Nos, Rechargeable LED T/L fitting18/20 Watt-01 No,PVC wire Single core 1.5 sq mm -60 RM, PVC wire Single core 2.5 sq mm -20 RM, casing & caping 25 mm-30RM, PVC Modular switch board 6 way-02 Nos, M/switch-06, Socket 5 Amp-03, MCB DB 4 way-01 No and Service wire aluminium stranded conductor of size 6 sq mm 2 core-30 RM complete all as directed and specified. Make of :- Inverter/ Solar Panel: Waree /Luminous/ Microtek/ Adani/ Tata Solar or equivalent. Make of Modular switch board, switch & socket: ABB, Legrand, Havells Crab Tree or equivalent.

Portable indoor type High quality Kero Heater metal body ignites type of continues heating duration min 8 hrs and above with capacity 4 ltrs above min output 7000 BTU/hrs incl all accessories. Make/Model : Paseco (PS22G)

Labour cost on Funiture and Miscs

Supply and Construction of Living Shelter (RCC) Living Shelter (RCC) Supply and Construction of RCC Living Shelter in Coffor Technology of Internal size 2.80 x 2.20 x 2.00 Mtr Ht complete with and including all RCC/PCC/labour/concreting/plastering/Door/Vent & finishes works and stores complete as per Technical Specification and Drawing attached

Supply and Construction of RCC Living Shelter in Coffor Technology of internal size 2.30 x 1.60 x 2.00 Mtr Height., complete with and including all RCC/PCC/Concreting/plastering / Door/ Vent & finishes works and stores complete as per Technical Specification and Drawing attached

Labour cost on constr of Living Shelter (RCC)

E/M items Distribution box 4 way double door SPN, 240 volts copper bus bar and neutral link earthing stud conforming to IS-13032 & IS – 8623 double door type. (Make : Havells/Legrand/L&T/ISI equivalent)

MCB SPN 240 Volts 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

MCB SP 240 Volts 6 to 32 Amps (Make : Havells/ L&T/ Standard/ISI equivalent)

PVC Flexible Conduit pipe 15 mm dia (Make :- Polycab/ Supreme /Finolex/ISI equivalent)

PVC tape 19mm wide 5 m long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent)

Screw full thread 6 x 19 mm ISI Marked, 200 Nos Pkt

PVC switch board (snow white) size 7”x4” for sockets and switches (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

Switch Piano 5 Amp 230 Volts Flush type one way (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

LED Tube light fittings 20W recharagle 230V box type 4 feets with CRCA body Pre coated white and Prewired for LED tublecomplete(Make :HAVELLS/BAJAJ/PHILIPS/CROMPTON/ISI equivalent)

Ceiling Rose three terminal (snow white) (Make : Anchor/ SSK/CONA/ISI equivalent)

Switch socket combination (snow white) 5 Amp 230 Volts (Make : Anchor/ SSK/CONA/ISI equivalent)

Cable PVC insulated elecric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size' 3/4”’ Medium Grade (snow white) (Make:-Presto/Polycab/Finolex/ISI equivalent)

PVC switch board (snow white) size 8” x 10” for main switches / DB (Make : Supreme/Polycab/ Finolex/ISI equivalent)

PVC 'L' bend and 'T' junction joint for PVC casing and capping confirming to IS 3419 (Part 3) (Make : Supreme/ Polycab/ Finolex/ISI equivalent)

Service cable PVC insulated aluminium conductor, 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall PVC sheathed in service connection 10 Sqmm 2 core (Make : Havells/ Finolex/ Plaza/ISI equivalent)

PVC Round/Squire Block (Make :- Polycab/Supreme/Finolex/ISI equivalent)

Lightening Conductor Air termination single pointed aluminium rod 12 mm dia and 300 mm long.

Testing point terminal block make of gun metal & phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw

Aluminium strips 25 x 3.0 mm

Galvanised Iron strip 32 x 6 mm

Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make:-Jindal/Tata/Kalinga/ISI equivalent)

Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt (Make:-Presto/Polycab/Finolex/ISI equivalent)

Charcoal

Salt normal

Labour cost on E/M items

Fire Alarm System Individual standalone plastic body smoke alarm with adequate provision for fixing on wall/ceiling/roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 dB. Smoke alarm be powered by 9 volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two nos of battery.

Individual standalone plastic body heat alarm with adequate provision for fixing on wall/ Ceiling/Roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangements to test the battery and indicator to warn for low battery, including supply two nos of battery.

Fire ball extinguisher 1.3 kg with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendly and suitable for all types of fires. (Make-AFO/Knaex/Fire Stop/Elide or equivalent/ISI equivalent)

Labour cost on Fire alarm system

Furniture Double Sleeping Bunk with matress complete all as per Technical Specification

Labour cost on Furniture

Supply and Construction of Gun Pits with OHP Construction Material Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112-1989 (Make: Birla Gold/Ambuja/ Ultratech/ACC /JK/ Dalmia/ISI equivalent.

Coarse Sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63-90 mm graded

Mild Steel Bars of size 8 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW/ISI equivalent.)

Mild Steel Bars of size 10 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW /ISI equivalent)

Mild Steel Bars of size 12mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW/ISI equivalent )

Mild Steel Bars of size 16 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW/ISI equivalent)

MS Binding wire : Make (TATA/ SAIL/ JSW/ISI equivalent)

Wooden plank for shuttering II class wood of size 3.0 x0.3 x0.026 m

Wooden Log for prop of size 3 Mtr long 100 MM dia

Wooden Scantling various size

Nails various sizes

HDPE sand bags OG colour of size 0.75x0.375x0.15

White Lime

Cement based paint (Snowcem) of Make : Asian/Berger/Nerloac/ISI equivalent

Labour cost on Constr mtrl

Portable Collapsible Protective Wall Baskets, Galvanished Welded Mesh Frame (2 Cells per set) of size 1.232 x 0.626 x 0.769 Mtr with complete accessories including non woven geotextile materials (3 mm Thick 300 GSM), Shall be supplied as per Schedule-II

Labour cost on Portable colapsible Protective wall baskets

Supply and Construction of Semi UG Amn Bkr Construction Material Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112-1989 (Make: Birla Gold/Ambuja/ Ultratech/ACC /JK/ Dalmia or equivalent.

Coarse Sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63-90 mm graded

AAC Blocks of size 600x200x150mm (Make:Brikolite/NCL/Nuconor/equivalent.)

Mild Steel Bars of size 8 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent.)

Mild Steel Bars of size 10 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent. )

Mild Steel Bars of size 12mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent. )

Mild Steel Bars of size 16 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent.)

MS Binding wire : Make (TATA/ SAIL/ JSW or equivalent.)

Wooden plank for shuttering II class wood of size 3.0 x0.3 x0.026 m

Acrylic emulsion paint of approved brand on new concrete surface of Make : berger/Asian/Nerolac/equivalent

Wooden Scantling various size

Oil bound distemper (washable Quality) of proprietary brand of ( Make : Berger/Asian/Nerolacor equivalent.)

Synthetic enamel paint any colour as directed conforming to IS 5-2004 ( Make : Berger/Asian/Nerolac or equivalent.)

Steel props of size 2 mtr long, 80 mm dia, adjustable upto 4 Mtr height nad as directed

Water Proofing compound (Make : Pidilite/Dr.fixit/ Fevicol) Confirming to IS 2645-2003

Painting brush 4'' (ISI Marked)

Nails various sizes

MS frame work for roof trusses, purlin, rafter and MS plate etc all as directed (Make : TATA/SAIL/JSW) :- (a) MS RHS of size 80X40X3.2

(b) MS Plate of size 8mm thick

MS Nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed.

PPGI Sheet, 0.55 mm thick of size10ft x3 ft of make: SAIL/TATA/JINDAL incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make(BERGER/ASIAN/ NEROLACor equivalent.)

PPGI ridge sheet of 0.63mm thick of 90cm wide of make: SAIL/TATA/JINDAL incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make(BERGER/ASIAN/NEROLACor equivalent.)

Self taping steel screw half thread with rawl plug of 1 1/2" size (ISI Marked) (100 Nos/Pkt)

HDPE sand bags OG colour of size 0.75x0.375x0.15

Door size (3.0X2.10m double leaf) MS sheet for door (2mm thick) frame \9chowkat) made of steel equal angle iron 55x55x6mm (ISI Grade),shutter made up of steel equal angle iron frame 35x35x5mm (ISI grade flat iron for stiles (25mm width and 5mm thick)holdfast 450mm long welded either side of anglle iron frame including hinges (06 Nos) tower bolt 150mm long (04 Nos). Bow handles (04 Noa) and sliding bolt 12mm dia 300 mm long with locking arrangement completeb both side and openable outside complete along the wall. Note : The door shall be made of steel suitable painted in Olive Green colour with two coats of red oxide primer.

Door size (1.80X2.10m double leaf) MS sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (ISI Grade),shutter made up of steel equal angle iron frame 35x35x5mm (ISI grade) flat iron for stiles (25mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 Nos) tower bolt 150mm long (04 Nos). Bow handles (04 Nos) and sliding bolt 12mm dia 300 mm long with locking arrangement complete both side and openable outside complete along the wall. Note : The door shall be made of steel suitable painted in Olive Green colour with two coats of red oxide primer.

Ventilator with Grill of size (600X400 mm) Ventilator (Loop Hole) frame for steel angle of size 35x35x5mm(ISIGrade). Grill made of TMT bar 12mm dia with welding. The items shall be suitably painted with weather resistance and fire proof paint over one coat of red oxide primer (Make: TATA/ ISPAT/ SAIL)

Gate size (3.0 mx 2.0m double leaf) Frame made of anlgeiron 75x 75x6mm (ISI Grade), with shutters made of reinforemnt (TMT Bar 12 mm dia), flat iron for stiles (25mm width and 5m thick) holdfast 450mm long welded either side of anlgeiron frame including hinges(06 Nos). Bow handle (04 Nos) and Sliding bolt 12mm dia 300mm long wwith locking arrangement with comlete both side and openable inside completely alongthe wall. Note : Gate shall be made of steel suitable painted in olive Green colour with two coats of red oxde primer.

Anti corrosive red oxide zinc chromate primer conforming to IS 5-2004 (Make : Berger/Nerolac/Asian or equivalent

While Lime

Waterproofing compound (Make : Pidilite/Dr.Fixit/Fevicol or equivalent

Cement based paint (Snowcem) of Make : Asian/Berger/Nerloac or equivalent

Construction Material for Drain & Sump Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112-1989 (Make: Birla Gold/Ambuja/ Ultratech/ACC /JK/ Dalmia or equivalent.

Coarse Sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63-90 mm graded

Brick Sub Class 'B'

Three phase 1.2 HP Monoblock pump 430 Volt complete with and incl 3 Mtr length required size flexible suction pipe, foot valve and connected accessories complete all as specified and directed (incl tasting x comminssining)

Lightening Conductor Air termination single pointed aluminium rod 12 mm dia and 300 mm long.

Testing point terminal block make of gun metal & phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw

Aluminium strips 25 x 3.0 mm

Galvanized Iron strip 32 x 6 mm

Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

Charcoal

Salt Normal

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Nut bolt 6mm dia 30 mtr dia with check nut and washer

GI pipe 40mm dia mtr 2.5 mtr (Make:-Jindal/Tata/Kalinga)

Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt (Make:-Presto/Polycab/Finolex)

WATER PROOFING ITEMS Wall (Vertical) Non woven Geotextile 500gsm as seperation layer between wall & PVC mebbrance with provision of PVC disk & anchor faster. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3 Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

2 mm thick PVC-P water proofing membrane. Properties of 2 mm thick PVC-P Water proofing membrane thickness - 2 mm+5% Tensile Strength ->16N/mm Elongation ->300% Cold folding resistance - no cracks at -20 Degrees Celsius Resistance under water pressure - waterproof at 10 bar/10hrs

Non woven Geotextile 500gsm as protective layer of PVC waterproofing mebbrance with provision of high quality adhesive for non-woven geotextile 50gsm. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3mm Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

Floor (Horizontal) Non woven Geotextile 500gsm as seperation layer between foundation & PVC mebbrane. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3 Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

2 mm thick PVC-P water proofing membrane. Properties of 2 mm thick PVC-P Water proofing membrane Thickness - 2 mm+5% Tensile Strength ->16N/mm Elongation ->300% Cold folding resistance - no cracks at -20 o Celsius Resistance under water pressure - waterproof at 10 bar/10hrs

Non woven Geotextile 500gsm as protective layer of PVC for PVC membrane Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3mm Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

Deck Slab (Horizontal) Non woven Geotextile 500gsm as seperation layer between deck slab & PVC mebbrance. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3 Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

2 mm thick PVC-P water proofing membrane. Properties of 2 mm thick PVC-P Water proofing membrane Thickness- 2 mm+5% Tensile Strength ->16N/mm Elongation ->300% Cold folding resistance - no cracks at -20o Celsius Resistance under water pressure - waterproof at 10 bar/10hrs

Non woven Geotextile 500gsm as protective layer of PVC waterproofing mebbrance with provision of high quality adhesive for non-woven geotextile 50gsm. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3mm Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

High quality adhesive for termination of PVC water proofing membrane at doors/ ventilators

Retaining wall (48.00 Mtr x 4.00 mtr height) 8 Mtr x 3 Mtr x 6 Nos = 48 Mtr Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt (Make:-Birla Gold/Ambuja/ Ultratech/ACC/JK/ Dalmia/equivalent)) Confirming to IS 8112 - (2013)

Coarse sand free from vegetation Confirming to IS 650 - 1991 (Reaffirmed 2008)

Coarse Aggregate 40mm graded Confirming to IS 383 - 2016

Stone boulder 9" to 12" Confirming to IS 1597 Part- I - 1992 (Reaffirmed 2002)

PVC Pipe 75mm dia 3 mtr long Make: Prince /Finolex/Supreme/equivalent Confirming to IS 4985 - 2000 (Reaffirmed 2006)

Supply and Construction of UG COMD POST Construction Mtrl & B/R Items Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/ Ambuja/Ultratech/ACC/JK /Dalmiya)

Coarse sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40 mm graded

Coarse aggregate 63-90 mm graded

Stone for RR Masonary less than 6"

Mild Steel Bars of size 8mm dia conforming to IS 432 (Part I) 1982 (Make : TATA / SAIL /JSW)

Mild Steel Bars of size 10 mm and above dia conforming to IS 432 (Part I) 1982 (Make : TATA / SAIL /JSW)

Mild Steel Bars of size 12 mm and above dia conforming to IS 432 (Part I) 1982 (Make : TATA / SAIL /JSW)

Mild Steel Bars of size 16 mm and above dia conforming to IS 432 (Part I) 1982 (Make : TATA / SAIL /JSW)

MS Binding Wire

Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m

Wooden Scantling various sizes

Wooden log for props of size 3.2 Mtr long 100mm dia.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

Priming surfaces and applying bitumen as a primer in base of APP membrane

MS frame work for roof trusses, purlin, rafter and MS plate etc all as directed (Make : TATA/SAIL/JSW). (a) MS RHS of size 80X40X3.2

(b) MS RHS of size 50X25X2.9

(c) MS RHS of size 96X48X3.2

(d) MS Plate of size 8mm thick

(e) MS Plate of size 10mm thick

(f) MS Plate of size 12mm thick

(g) MS angle of size 40X40X6 for cleat

MS Nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed.

MS Flat iron 40x5mm thick for wind tie : TATA/SAIL/JSW

Iron welding rod confirming to IS 814-2002 (ISI Marked) 3.15mm Thick : 100 Nos Pkt

Water Proofing compoundconfirming to IS 2645-2003 (Make : Pidilite/Dr.fixit/ Fevicol)

Quick setting Compound (Make:- Pidilite/Fevicol/Quick Fix)

Cement based paint (Snowcem) Make : Berger/Asian/Nerolac

Oil Bound Distemper (Washable Quality) of proprietary brand of (Make : NEROLAC/ BERGER/ ASIAN)

Birla white wall care putty (Water Resistant White Cement). (Make : NEROLAC/ BERGER/ ASIAN)

PPGI roofing sheet 10' x 3' long and thickness 0.63 mm with grard film. The PPGI sheet shall have minium coating of 4-5 micron epoxy primer and 18-20 micon polyester top coat. The top of 30-40 micon on the finished surface only for protection. The pre coated GI sheet confirm to IS -14246-1995 Make : Unifix/Jindal Mectec or euinalent brand with IS specification.

Pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 Mpa(Make-Uniix/Jindal mectec or Eqv Brand)

Synthetic Paint enamelled OG colour confirming to IS 5-2004 (Make : Berger/Asian/Nerolac)

Painting Brush 4" (ISI Marked)

Nails various size

Self taping steel screw half thread with rawl plug of 1 1/2" size (ISI Marked) (100 Nos/Pkt)

Anodised Aluminium door 1000 mm x2100 Double shutter with frame including all fittings and as directed (Make : Jindal/Hindalco) aluminium section weighing 0.55 kg/mtr.

Anodised Aluminium window triple track (2 track glass & 1 track wire mesh) with frame of size 1000mm x 1000mm including all fittings and as directed (Make : Jindal/ Hindalco) aluminium section weighing 0.55 kg/mtr.

Anodised Aluminium Ventilator 1200x600 mm fixed type with glass (4mm thick) thick including all fittings and as directed (Make : Jindal/Hindalco) aluminium section weighing 0.55 kg/mtr.

MS anchor bolt, suitable for RCC work, 12mm dia, 300mm long with 2 washer and a nut (Minimum wt of each bolt & nut is 450 gm) complete all as directed.

Ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick Make: (Johnson/ Kajaria/ Orient) 1st quality confroming to IS -156-2006

White Cement confirming to IS 8042/1989 (Make: ACC/Birla White /Ambuja)

Curtain Arrangement Drapery and rod made of 25 mm dia and 1600 mm long, pre coated MS pipe with fancy type ends. Suitable fixing arrangement for the curtain rod, shall be made and supplied to hold the curtain rods alongwith fixing arrangement complete. (ISI Marked)

Retaining wall (height) 8 Mtr x 3 Mtr (5 Nos) = 40 Mtr Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt (Make:-Birla Gold/Ambuja/ Ultratech/ACC/JK/ Dalmia or equivalent) Confirming to IS 8112 - (2013)

Coarse sand free from vegetation Confirming to IS 650 - 1991 (Reaffirmed 2008)

Coarse Aggregate 40mm graded Confirming to IS 383 - 2016

Stone boulder 9" to 12" Confirming to IS 1597 Part- I - 1992 (Reaffirmed 2002)

PVC Pipe 75mm dia 3 mtr long Make: Prince /Finolex/Supreme/equivalent Confirming to IS 4985 - 2000 (Reaffirmed 2006)

Construction Material for Drain & Sump Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112-1989 (Make: Birla Gold/Ambuja/ Ultratech/ACC /JK/ Dalmia or equivalent.

Coarse Sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63-90 mm graded

Brick Sub Class 'B'

Three Phase 1.2 HP monoblock pump 430 Volt complete with and incl 3 Mtr length required size flexible suction pipe, foot valve and connected accessories complete all as specified and directed (incl testing & commissioning)

E/M items Distribution box 8 way SPN, 240 volts copper bus bar and neutral link earthing stud conforming to IS-13032 & IS – 8623 double door type. (Make : Havells/Legrand /L&T)

MCB SPN 240 Volts 32 Amps (Make : Havells/ L&T/ Standard)

MCB SP 6 to 32 Amps (Make : Havells/ L&T/ Standard)

PVC tape 19mm wide 5 m long (Make : Steelgrip/Anchor/Kinjal)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 2.5 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 4 Sqmm single core (FRLS) confirming to IS 1554 (part-1) 1988 (Make : (Havells/Finolex/Polycab)

PVC casing capping of size 1” Medium Grade (snow white) (Make:-Presto/Polycab/Finolex)

PVC casing capping of size 3/4” Medium Grade (snow white) (Make:-Presto/Polycab/Finolex)

Modular Switch Piano 5 Amp 230 Volts Flush type one way (snow white) (Make : Anchor/ SSK/CONA)

LED Tube light fittings 15W 230V box type 4 feets with CRCA body Pre coated white and Prewired for LED tuble complete (Make : HAVELLS/BAJAJ/PHILIPS/ CROMPTON)

LED Mirror lights 1 feet 5 Watts (Make- Havelles/ Bajaj/ Philips/ Crompton)

Screw full thread 6 x 19 mm ISI Marked, 200 Nos Pkt

PVC switch board (snow white) size 6”x6” for sockets and switches (Make : Supreme/ Polycab/ Finolex)

PVC switch board (snow white) size 7”x4” for sockets and switches (Make : Supreme/ Polycab/ Finolex)

PVC switch board (snow white) size 8” x 10” for main switches / DB (Make : Supreme/Polycab/ Finolex)

PVC 'L' bend and 'T' junction joint for PVC casing and capping confirming to IS 3419 (Part 3) (Make : Supreme/ Polycab/ Finolex)

Modular Switch socket combination(snow white) multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/ SSK/CONA)

Modular Switch socket combination (snow white) 5 Amp 230 Volts (Make : Anchor/ SSK/CONA)

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long (Make:-Jindal/Tata/Kalinga)

Service cable PVC insulated aluminium conductor, 1100 volt grade Heavy duty served with inner sheathing of PVC tap and overall PVC sheathed in service connection 10 Sqmm 2 core(Make : Havells/ Finolex/ Plaza)

Ceiling Rose three terminal (snow white) (Make : Anchor/ SSK/CONA)

LED Bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with LED lamp 10 watts (Make : HAVELLS/BAJAJ/PHILIPS/CROMPTON)

PVC Flexible wire copper conductor multi stranded 0.0016/76 (Make: Havells/Finolex/Plaza)

PVC Flexible Conduit pipe 15 mm dia (Make :- Polycab/Supreme/Finolex)

PVC Round/Squire Block (Make :- Polycab/Supreme/Finolex)

Exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings (Make : Bajaj/Havells/ Crompton).

Fire extinguisher of one kilogram capacity, dry power type conforming to IS-13849 along with its accessories (Make: Cease fire/Omex/Alfa Fire)

Earthing Items Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make:-Jindal/Tata/Kalinga)

GI wire 4 mm diameter (For earthing).

Charcoal

Salt normal

Lightening Conductor Air termination single pointed aluminium rod 12 mm dia and 300 mm long.

Testing point terminal block make of gun metal & phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw

Aluminium strips 25 x 3.0 mm

Galvanized Iron strip 32 x 6 mm

Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make:-Jindal/Tata/Kalinga)

Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt (Make:-Presto/Polycab/Finolex)

Funiture Double sleeping Bunk alongwith Rexene sleeved Matress of Make :- Kurlon/Sleepwell/Corform, complete all as specified in tech specification.

Steel Bed side Locker of size 1000mm X 1520mm X 450mm, comlete all as specified in tech specification

Study chair of size length 56 Cm, Height 82 Cm and Width 56 Cm, Type : Lacquered finish with arm, seat and back cushion, velvet upholstery (Make :- Supreme or equivalent)

Study Table of size 4' X 2', Wooden top on round tube structure with three drawers on one side.

Peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms (Make:-Ess Ess/Prayag/ Johnson Suisse)

Water Dispenser of 230 V 500 Watts without refrigerator with normal cold and heating capacity of 5 lts/hour with storage compartment and auto shut off facility. (Make : VOLTAS/LG/USHA)

Protable indoor type High quality Kero Heater metal body ignites type of continues heating duration min 8 hrs and above with capacity 4 ltrs above min output 7000 BTU/hrs incl all accessories model 5- 585-B or eqivallent

Fire Alarm System Individual standalone plastic body smoke alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery. (Make :- Fire End/AFO/Safe Guard)

Individual standalone plastic body heat alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two No of battery. (Make :- Fire End/AFO/Safe Guard)

Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendlye, and suitable for all type of fires. (Make :- AFO/Kanex/Fire Stop/Elide/Fire End/Safe Guard or equivalant)

J W ENTERPRISES (BID ID -3289842)

PARBIN SIDDIKI (BID ID -3289700)