REPAIRS TO TOILETS, KITCHEN, PLUMBING, INTERNAL AND EXTERNAL PAINTING ETC IN MARSHAL BK, APS, BAIRD BARRACK, NCC, CWE, GE ETC UNDER GE(SOUTH) BANGALORE

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing rubbish ouside MD land complete all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F coloured Glazed ceramic tile in verticle surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, shelf and partition pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed

M&L for providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm including fixing cantilever brackets and connecting union to waste pipe complete all as specified and as directed.

Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in tfloors Iincluding taking down old tubes 20mm dia, complete all as splecified.

All as per item no.9 hereinbefore but 25mm dia including taking down 25mm dia pipe all as specified and as directed.

S&F in CPVC brass treaded elbow 20 mm fixed with all as specified.

S&F CPVC brass treaded Tee 20 mm all as specified.

S&F viterous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Squatting pan orrisa pattern including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete.

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified.

S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste coupling 32mm dia etc.

S&F PVC connection 15 mm dia with PTMT nuts of length 450 mm.

S&F in repair 32 mm dia flexible PVC waste pipe for sink and WHB of suitable length complete all as specified.

S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed ends for iron/CPVC pipes or for unions complete all as specified and directed.

S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed.

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified

S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges

S&F shelf of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Min wt 300 gms)

S&F in repairs chromium plated grating 100/75 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F assembled ready to use hollow section stainless steel grade 304, kitchen plate rack inlcuding top/middle shelves of hoolow section medium grade, square hollow supports, including bottom hooks, spoon holes, size 915x915mm as approved and specified.

S&F 25mm PP-R Gate valves (brass insert) as per requirement of the site

S&F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified.

All as per item no.28 hereinbefore but suitable for WHB.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

All as per item no.30 but 110mm dia complete all as specified and as directed.

S&F in repairs stainless steel grade 304 curtain rod medium weight 25mm dia including support wall bracket and end knobs of stainless steel all as specified and as directed.

S&F stainless steel end knobs, polished, suitable for 25mm dia rods, medium weight all as specified

S&F stainless steel Wall bracket 100mm, polished, suitable for 25mm dia rods, medium weight, fixed in wall with brass screws all as specified

Taking down chowkat or frames with shutter (without taking off shutters from the frame)n. exc 1.5 sqm complete all as specified and directed.

S&F stainless steel 75 mm butt hinges for doors complete all as specified.

S&F 100 mm long aluminium anodised barrel tower bolts and extruded section complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed. (Cost of hold fast included in the unit rate of this item.)

M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing upto complete all as specified and as directed.

S&F 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of tanks all as specified.

All as per item no.42 hereinbefore but 1000 ltr capacity complete all as specified and as directed.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Min wt 210 gms)

S&F CPVC tank adaptor 25mm dia.

S&F GI snap grid for false ceiling suitable for 600x600 mm ceiling tiles,hanging with 2.5mm GI wire of any length and 4mm thick cement fibre board of approved design including dismantling wall and ceiling boards(fibre,pulp,insulation etc.)or insulation boards/slabs/blankets any thickness including cover fillets,complete all as specified and as directed. Note:Rate of Grid,ceiling board,hangers etc included in the quoted rates.

Preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion all as specified and as directed.

Preparation of old decorated surfaces of ceiling and applying one coat of distemper oil emulsion all as specified and as directed.

Preparation of old decorated surfaces of wall and applying one coat of cement base paint all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coat of distemper oil emulsion all as specified and as directed.

M&L for Complete removal of existing treatment of old surfaces of walls and applying two coat of distemper oil emulsion incl 1mm thick wall putty with alkali resistant priming paint on plastered surface complete all as specified.

Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:4 mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and fair complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule)

M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 incl finished even and smooth (without using extra cement).

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth including cutting to edges, all mitres and stopped ends, etc.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tint over primer with 1mm wall putty on plastered surface complete all as specified.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion white or tinted over primer with 1mm wall putty on plastered surface complete all as specified.

M&L for preparation of old decorated surfaces of walls and applying one coat of premium acrylic exterior paint complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for preparation of old painted steel and iron surfaces of roof trusses or any description, over 10 cm in width or girth, not otherwise described and applying one coats of synthetic enemel paint.

Removal of vegetation/tree growth etc on walls/roofs of single/multi storeyed building including digging out and filling holes with PCC 1:2:4 type B1 using (20 mm graded stone agg) and finishing the surface to match adjacent surfaces after application of suitable chemical to avoid re-growth of the vegetation complete all as specified and directed (any damage to the adjacent govt properties shall be made good without any extra cost) for plants girth not exc 25 cm

All as per item no.65 above for plants girth exc 25 cm.

S SUDHAKAR (BID ID -3337469)