Upgradation of Existing Toilet Block and Construction of Water Tank, Septic Tank along with Soakage Pit at Bagh-e-Bahu

Amount

Earth work in Excavation by manual means including disposal of excavated earth, lead upto 1 mtr. From cutting edge, disposed earth to be levelled and neatly dressed.

Providing, laying in position cement concrete (1:4:8) grade excluding the cost of centering and shuttering, all works upto plinth level with crushed stone aggregate.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Foundation, plinth, Superstructure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work including straightening,cutting,bending,binding all complete

Centering and shuttering including strutting propping etc. and removal of formwork for : walls

Suspended floors,roofs and balconies.

Edges of slabs.

Water proofing treatment under floors by using cement slurry

15mm thick cement sand plaster on brick wall surface with (1:4) mix. including all carraiges.

Cement concrete flooring in (1:2:4) mix with floating coat of neat cement.{25mm}

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing,fixing M.S lockable cover of underground water tank made of M.S angle flats,M.S Sheets etc. complete incl. priming and painting complete.

Providing and fixing 1 H.P water pump over ground for lifting of water complete incl. all fittings and fixtures required.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Taking out doors,windows and clerstorey windows Shutters(Steel or wood) staking within 50m lead.

Of area of 3sqm and below

Of area beyond 3sqm

Providing and fixing 1st quality ceramic glazed wall tile of approved make/size(kajaria,Nitco,Johnson,somany or equivalent) in all colours and shade laid over 12mm thick bed of cement mortar 1:3 and jointed with grey cement slurry including pointing in white cement.(Size 300x600mm).Basic cost of tile is 100/- shall be approved by Engineer-in-charge

Providing and fixing 1st quality Vitrified floor tiles (anti-Skid) of approved make/size( kajaria, Nitco, Johnson, somany or equivalent) in all colours and shade laid over 20mm thick bed of cement mortar 1:4 and jointed with tile grout(laticrete) of matching shade as approved 600mmx600mm) Basic cost of tile.Rs.80/-.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Finishing walls with 100% Premium acrylic emulsion paint having VOCless than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:

after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm

laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.

third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours.The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.

fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.

Dismantling brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50M lead.

Labour Engaged for removing bathroom fittings,CI/GI pipes including disposal of material.

Disposal of unserviceable material from site by mechanical transport beyond municipal limits.

Providing,fixing water supply and sanitary Fittings.

CPVC pipes 20mm (Medium)

CPVC pipes 15mm

Providing, fixing Urinals of size 375x315x620 (Jaquar make) model URS-WHT-132530

Providing, fixing W.C with Cistern (western type) of Jaquar make. Model no. W.C {LYS-WHT-38751S}. Model no.Cistern {LYS-WHT-38201}.

Providing,fixing wash basin of Jaquar make {size 590x420x195} Model no.CNS-WHT-705 shape oval.

Providing,fixing Central Hole Basin mixer of Jaquar make Model no.CON-169KNB with Pop up waste system

Providing,fixing Bib cock (Straight line modal with wall flange) of Jaquar make. Model no. FLR-5047N

Providing,fixing Hand dryer-speed flow. Model no. HDR-SAP-M06ACS

Providing,fixing soap dispenser with metallic bottle. Model no. ACN-1137N

Providing,fixing toilet paper holder Recessed type (stainless steel). Model no. AHS-1551

Providing,fixing PVC pipe of 100mm dia.

Providing, fixing Towel Ring of Jaquar Make Model no. 1121BN-ACN

Providing, fixing PVC door frames of size 50x47mm with a wall thickness of 5mm,made out of extruded 5mm rigid PVC foam sheet metered at corners and jointed with two numbers of 150mm long brackets of 15x15mm MS square tube,the vertical door profiles to be reinforced with 19x19mm MS square tube,the vertical door profiles to be reinforced with 19x19mm MS square tube of 19 guage,EPDM rubber gasket weather seal to be provided throughout the frame.The door frame to be fixed to the wall using MS Screws of 65/100 size completely as per manufacturers specifications and directions of Engineer-in-Charge.

Providing and fixing 30mm thick factory made panel PVC door shutters for frame made out of M.S Tubes of 19 guage thickness and size of 19mmx19mm for styles and 15mmx15mm for top and bottom rails.M.S frame shall be have a coat of steel primer of approved make and manufacture. Complete Job. Pre-laminated PVC door Shutters

Providing and fixing Aluminium doors and windows complete Job.

Providing and fixing Aluminium doors and windows complete Job.

Constructing brick masonary Man hole in cement mortar 1:4(1 cement:4 coarse sand) R.C.C top slab in (1:1.5:3) with crushed aggregate 20mm nominal size foundation concrete (1:4:8) mix with crushed aggregate 40mm nominal size inside plastering with 12mm in cement mortar (1:3) finished with floating coat of neat cement and making channels in cement concrete (1:2:4) finished with floting coat of neat cement as per standard design. Inside size 90x80 cm and 45 cm deep including C.I cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg) With F.P.S bricks of class designation of 75 and with crushed stone aggregate.

Carriages of materials by mechanical transport

Stone aggregate for an av. lead of 15.0KM including 200M Head load

Sand for an av.lead of 55.00 K.M including 200M Head load

Bricks for an av. lead of 44KM including 200M Head load