GE 874/EWS-52/2021-22

Amount

B/R and E/M Portion

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete, all as specified and directed.

Description all as per item No 3 above but except stone all as specified and directed.

Plain cement concrete (1:2:4) type B-1 using (20mm graded crushed stone aggregate) as in copings, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, all as specified.

Taking down cement plaster on stone walls etc incl racking out joints, hacking for key scrubbing down with water etc.

M & L applying two coats of whitewashing including preparation of newly plastered surface of wall.

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.

M &L for second class soft wood as in scantling clean sawn complete all as specified and directed by Engr-in-Charge.

All as per description of Ser item No 9 here in before but fixing only.

Dismantling of plain or corrugated steel sheeting any guage / thickness including Nainital or similar pattern roof covering, all as specified.

S & F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

S&F for Pre-Painted galvanume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as roof covering / cladding to wall fixed with self tapping screws as specified.

M&L Plain Cement concrete type C-2 1:3:6 using 40mm graded aggregate of 100mm thick in sub base of flooring.

M&L for 40mm thick PCC 1:2:4 (20mm graded aggregate) finishing cement concrete surface even and smooth using extra cement as in floor etc.

Supplied only glass dividing strip 3mm thick 38mm width in strip.

Dismantling wall/ceiling boardof any discription including cover fillets.

M&L 6 mm thick plywood, 5 Nos of Ply, grade BWR, framework type BB fixed with screws with timber framework type BB fixed with nails to timber frame work in ceilling.

M & L plain fillet square, rectangular in section exc. 3 & n exc. 6 sqcm.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths.

Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter from the frame) all as specified.

Taking down chowkhats or frame n exe. 1.5sqm each with shutter (without taking out shutter) all as specified.

M & L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints.

M & L plain framed paneled shutter 2nd class soft wood 35mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc supplied and fixed to chowkhat, 30mm thick.

Mild steel butt hinges, medium weight, cold rolled, 100mm long, all as specified.

Mild steel butt hinges, medium weight, cold rolled, 75mm long, all as specified.

S & F 250mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.

Mild steel pressed handles,oval type, stove enameled, black, size of handle 125mm, all as specified.

Mild steel pressed handles,oval type, stove enameled, black, size of handle 100mm, all as specified.

S&F 125 mm long aluminium alloy, anodised barrel tower bolt of extruded section.

MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long, all as specified and directed.

M&L 15mm thick rendering in Cement mortar 1:6 on fair faces of brick / stone work making surfaces even and smooth without using extra cement.

M & L Plain cements concrete 1:4:8 type D-2 (using 40mm stone aggregate as in sub base flooring) 75mm thick.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set jointed and pointed in neat cement slurry over and including 25 mm thick screed bed in cement mortar 1 :4 floors.

M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 3mm thick.

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section.

S & F aluminum handles, cast type, anodized 150mm long.

M & L for rendering 12mm thick on over surface other than fair face of brick work or stone masonry in cement mortar 1:6 finished over and smooth w/o using extra cement.

Hacking out broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and ixing new ones

M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 3mm thick.

M&L for 25mm thick flooring in plain Cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) and finishing the surface rough for floor finish.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes.

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in wall/linings complete all as specified.

M&L for 75 mm thick plinth protection in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

Excavation over area n. exc 1.5m deep & getting out in any type of soil.

M & L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete.

M & L for Walling of random rubble , brought upto courses well bonded, bedded and solidly hearted built in cement mortar 1:4.

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints.

M & L PCC 1:2:4 type B - 1 ( 20 mm graded aggregate) cast in situ in lintels upto 1.5 m span, cills and other similar bands, plinth course, parapets, coping, bed plates and the like incl weathering slightly, water through.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

M & L precast cement conc 1:3:6 type C1 (using 20 mm graded stone aggregate) as in boulders (for stone walling )and set in cement mortar 1:6.

M & L hand packing (any thickness) at back of wall etc and raising or lowering to required level.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil.

M & L flush pointing to random rubble stone masonry in cement mortar 1:4, uncoursed or brought upto courses

Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit and making good distribued surface of wall, floor etc complete all as specified and directed.

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make of wire: Finolex/Anchor/Polycab.

All as per description all as per item No.78 here in before, but for 3 Pin socket outlet 5 Amps on the same board, with cable 1.5Sqmm size, insulated copper conductor cable 1100 volt grade with continuous PVC insulated copper conductor cable of 1.5 Sqmm, complete all as specified and directed.

Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab.

Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.0 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab.

Supply and fixing of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 9 watt. Make : Havells/Anchor/Siska/Philips/Bajaj

Supply and LED 9 Watt Bulb with B22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above

M&L for LED Batten 1x20 W for regal batten for LED Universal battenm for G13 with 18 W rods and ultra bright LED Polycarbonate tube light very high effiency suited for instalation in existing T8 and connecting electrically using PVC insulated and overall sheated flexible copper conducter cable of size 0.75 sqm 3 core all as required at site or directed by engr - in- charge. Make : Havells Batten Cap part No LHFYBYG21N1W020 and LED Tube Rod Cat part LHLDCLXNUL8X018 or Equivalent.

Supply and fixing LED light fitting, 1x9 W bulk head luminaries, including LED light driver with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make : Bajaj/Havells/Anchor/Philips

S&F flush type Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips

S&F ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips

S&F socket outlet 2-in-1, 3 pin, 6 Amps Flush type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips

S&F Switch socket combination 5 in 1, 5 and 15 Amp Flush Type universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips

Supply & Fixing RCBO, single phase and neutral 30mA, 420V , 32Amp all as specified and directed. Make- Havelles/MDS/Legrand.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 ways with 200 Amps rated bus bar with IP-43 IK-09 protection conforming to Cat No. 607711 of Legrand or equivalent fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/Hager.

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips

S&F Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips

Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts graded standard aluminium conductor of size 10 sq mm 2 core complete all as specified and directed. Make Havells/Polycab/Gloster

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

S&F irragular voltage, voltage stabilizer for automatic operation, single phase and neutral air cooled indoor type & designated for input variation between 110V to 290V with output voltage stabilizer at 230 V with accuracy + 2.5% 4-6 Sec initial delay and of capacity 6.6 KVA, 30 Amp all as specified and directed by Engr-in-Charge Make : as approved by Engr-in-Charge

M/S GM CONSTRUCTIONS

M/S GHULAM RUBANI & SONS

M/S AK CONSTRUCTION

patriotic builders

Bidder Name

patriotic builders

M/S GHULAM RUBANI & SONS

M/S MANZOORAHMAD LONE

M/S GM CONSTRUCTIONS

M/S AK CONSTRUCTION