Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 CrAccepted-AOC | ₹2.8 Cr | L1 | Accepted-AOC stood L1 |
| 2 | L2Rejected-AOC | - | L2 | Rejected-AOC stood L2 |
| Sl No | Description | Qty | Unit | PRIME INDUSTRY L1 | FLOWTECH INDUSTRIAL COMPANY L2 |
|---|---|---|---|---|---|
| 1.00SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: DEG/14694-01/00, SERIAL NO.: 14694-1.1, MILL INLET HOT PRIMARY AIR ISOLATION DAMPER | |||||
| 1.01 | SET OF SEALS ALONG WITH SUPPORT BARS,
SEAL FIXING HARDWARES
Modified Seals
(1 SET = 1 DAMPER REQUIREMENT) | 6 | Set | 1,32,000 ₹1,58,875.2 Lowest | 3,40,750 ₹4,02,085 |
| 1.02 | PUSH ROD (1SET = 2NOS.) | 3 | Set | 13,200 ₹15,887.52 Lowest | 1,27,600 ₹1,50,568 |
| 1.03 | STUFFING BOX
(1 SET = 1 DAMPER REQUIREMENT) | 2 | Set | 26,400 ₹31,775.04 Lowest | 52,200 ₹61,596 |
| 2.00SPARES FOR “FOURESS” MAKE MULTI LOUVRE DAMPER AS PER DRAWING NO: ML/14694-04/00 SERIAL NO.: 14694-4.1 MILL INLET HOT PRIMARY AIR MULTI LOUVRE DAMPER | |||||
| 2.01 | SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT) | 6 | Set | 1,32,000 ₹1,58,875.2 | 88,450 ₹1,04,371 Lowest |
| 2.02 | SHAFT ASSEMBLY
(1 SET = 1 NOS OF DRIVE SHAFT
& 3 NOS OF STUB SHAFT) | 6 | Set | 49,500 ₹59,578.2 Lowest | 1,81,250 ₹2,13,875 |
| 2.03 | BEARING ASSEMBLY
(1 SET = 1 DAMPER REQUIREMENT) | 1 | Set | 82,500 ₹99,297 Lowest | 1,20,350 ₹1,42,013 |
| 2.04 | STUFFING BOX
(1 SET = 1 DAMPER REQUIREMENT) | 2 | Set | 71,500 ₹86,057.4 Lowest | 1,71,100 ₹2,01,898 |
| 3.00SPARES FOR “FOURESS” MAKE TWIN SEAL FLAP DAMPER AS PER DRAWING NO: TSF/14694-05/00, SERIAL NO.: 14694-5.1 MILL INLET COLD PRIMARY AIR DAMPER | |||||
Tender Value
₹2.5 Cr
EMD Value
₹2.5 L
Closing Date
5 Mar 2024, 3:30 pmClosed
S Saraf
O/o Adddl CE(P and W) SSTPP Dongalia
Procurement of spares of various dampers and guillotine gate installed in air and flue gas ducts in boiler at 2x660 MW SSTPP Khandwa on limited offer make basis
2024_MPPGC_328350_1
PT-2653
Limited
Miscellaneous Goods
Item Wise
30 days
O/o Adddl CE(P and W) SSTPP Dongalia
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹2.5 L
Yes
8 Dec 2025
27 Jan 2024
6 Mar 2024
27 Jan 2024
5 Mar 2024
27 Jan 2024
SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: DEG/14694-01/00, SERIAL NO.: 14694-1.1, MILL INLET HOT PRIMARY AIR ISOLATION DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES Modified Seals (1 SET = 1 DAMPER REQUIREMENT)
PUSH ROD (1SET = 2NOS.)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE MULTI LOUVRE DAMPER AS PER DRAWING NO: ML/14694-04/00 SERIAL NO.: 14694-4.1 MILL INLET HOT PRIMARY AIR MULTI LOUVRE DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
SHAFT ASSEMBLY (1 SET = 1 NOS OF DRIVE SHAFT & 3 NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE TWIN SEAL FLAP DAMPER AS PER DRAWING NO: TSF/14694-05/00, SERIAL NO.: 14694-5.1 MILL INLET COLD PRIMARY AIR DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
DRIVE SHAFT AASEMBLY (1 SET = 1NOS OF DRIVE SHAFT & 1NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE MULTI LOUVRE DAMPER AS PER DRAWING NO: ML/14694-07/00 SERIAL NO.: 14694-7.1 MILL INLET COLD PRIMARY AIR DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
DRIVE SHAFT ASSEMBLY (1SET = 1NOS OF DRIVE SHAFT & 3NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: GSG/14694-10/00 SERIAL NO.: 14694-10.1 ESP OUTLET FLUE GAS ISOLATION DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
DRIVE SCREW (1 SET = 2 NOS)
LINE SHAFT (1 SET = 3 NOS)
GAITER (1 SET = 4 NOS)
PILLOW BLOCK BEARING (1 SET = 4 NOS)
UNVIERSAL COUPLING (1 SET = 4 NOS)
FLEXIBLE COUPLING (1 SET = 4 NOS)
SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: DEG/14694-11/00 SERIAL NO.: 14694-11.1 FD FAN DISCHARGE DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
DRIVE SCREW (1 SET = 2 NOS)
LINE SHAFT (1 SET = 3 NOS)
GAITER (1 SET = 4 NOS)
PILLOW BLOCK BEARING (1 SET = 4 NOS)
UNVIERSAL COUPLING (1 SET = 4 NOS)
FLEXIBLE COUPLING (1 SET = 4 NOS)
MATING FLANGE GASKET (1 SET = 1 DAMPER REQUIREMENT)
PUSH / PULL ROD (1 SET = 2 NOS)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE MULTI LOUVRE DAMPER AS PER DRAWING NO: ML/14694-13/00 SERIAL NO.: 14694-13.1 RAPH OUTLET HOT SA DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
DRIVE SHAFT ASSEMBLY (1SET = 1NOS OF DRIVE SHAFT & 7NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: DEG/14694-19/00 SERIAL NO.: 14694-19.1 PA FAN OUTLET DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
DRIVE SHAFT (1 SET = 3 NOS)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
BEARING (1 SET = 2 NOS)
COUNTER FLANGE GASKET (1 SET = 1 DAMPER REQUIREMENT)
PILLOW BLOCK BEARING (1 SET = 4 NOS)
FLEXIBLE COUPLING (1 SET = 2 NOS)
UNIVERSAL COUPLING (1 SET = 2 NOS)
LINE SHAFT (1 SET = 2 NOS)
SPARES FOR “FOURESS” MAKE MULTI LOUVRE DAMPER AS PER DRAWING NO: ML/14694-32/00 SERIAL NO.: 14694-32.1 RAPH INLET FLUE GAS DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
SHAFT ASSEMBLY (1 SET = 2 NOS OF DRIVE SHAFT & 18 NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE MULTI LOUVRE DAMPER AS PER DRAWING NO: ML/14694-34/00 SERIAL NO.: 14694-34.1 RAPH OUTLET FLUE GAS DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
SHAFT ASSEMBLY (1 SET = 1 NOS OF DRIVE SHAFT & 18 NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: GSG/14694-36.1/00 SERIAL NO.: 14694-36.1 ESP INLET FLUE GAS DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
DRIVE SCREW (1 SET = 2 NOS)
LINE SHAFT (1 SET = 3 NOS)
GAITER (1 SET = 4 NOS)
PILLOW BLOCK BEARING (1 SET = 4 NOS)
UNVIERSAL COUPLING (1 SET = 4 NOS)
FLEXIBLE COUPLING (1 SET = 4 NOS)
SPARES FOR “FOURESS” MAKE MULTI LOUVRE DAMPER AS PER DRAWING NO: ML/14694-39/00 SERIAL NO.: 14694-39.1 ID INLET FLUE GAS DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
SHAFT ASSEMBLY (1 SET = 2 NOS OF DRIVE SHAFT & 2 NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: DEG/14694-41/00 SERIAL NO.: 14694-41.1 ID OUTLET FLUE GAS DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
SHAFT ASSEMBLY (1 SET = 2 NOS OF DRIVE SHAFT & 2 NOS OF STUB SHAFT)
SHAFT ASSEMBLY (1 SET = 2 NOS OF DRIVE SHAFT & 2 NOS OF STUB SHAFT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE DAMPER AS PER DRAWING NO: DEG/14694-54/00 SERIAL NO.: 14694-54.1 PA INTERCONNECTING DUCT DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
SHAFT ASSEMBLY (1 SET = 1 NOS OF DRIVE SHAFT & 7 NOS OF STUB SHAFT)
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
SPARES FOR “FOURESS” MAKE GUILLOTINE DAMPER AS PER DRAWING NO: DEG/14694-44/00 SERIAL NO.: 14694-44.1 MILL SEAL AIR INLET DAMPER
SET OF SEALS ALONG WITH SUPPORT BARS, SEAL FIXING HARDWARES (1 SET = 1 DAMPER REQUIREMENT)
SHAFT
BEARING ASSEMBLY (1 SET = 1 DAMPER REQUIREMENT)
STUFFING BOX (1 SET = 1 DAMPER REQUIREMENT)
FLOWTECH INDUSTRIAL COMPANY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .