Construction of Unit Canteen at Krishnagiri in Krishnagiri District under announcement made by the Honble Chief Minister for the year 2024-2025.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3 : Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3 : Supply and planting avenue trees

50.4 : Providing Tree guard

WATER SUPPLY ARRANGEMENTS 51.2: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark

52 : PVC Water supply (ASTM) with UPVC Specials a. 32 mm dia

b. 25 mm dia

55.1 : S & F of Squat Urinal

55.2 : S & F of Flat Back Urinal

Electrical arrangements 69 : S & F of 16 Amp. Power plug

72 : S & F of Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : S & L of 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : S&F of Earthing Station IS3043 (Type I)

81 : S & F of Meter cupboard

86 : Anti termite treatment

112 : S & F of Exhaust Fan 300 mm dia

ANNEXURE-I 2.1.1 : Supplying and filling with gravel

2.1.3 : Filling sand (using crushed stone sand)

3.1.1: C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.2.1.1 : Standardised concrete Mix M25 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt/Ground Floor

c) In First Floor

d) In Second Floor

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and Basement

b. In Ground Floor

c. In First Floor

11.5.1 : Brick Partition work in C.M. 1:4 Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 70 mm tk (B.P.) (using crushed stone sand) with admixture a. In Ground floor

b. In First floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor

b. In First floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) b. In Stilt / Ground floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.2.1: Supplying and fixing of solid core flush door shutter of Tk 35mm a) Door size 1800mm x 2400mm (Double Leaf)

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 900mm x 2400mm (Single Leaf)

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1 : Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasriciser

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Mixed with Super Plasriciser

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2: Special Ceiling plastering in C.M. 1:3,10 mm tk. (using crushed stone sand) including plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a) Providing pit (M20)

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.9 : Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

80: S & F of 375 x 300 x 20mm thick TW plank

87.1: Supplying and delivery of Three phase ELCB/RCCB

90.1: Providing additional strutting to centering of plain surface

98.3.2 : TW Double leaves panelled door shutter (with Brass fittings) a. 1800 x 2400mm.

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand) CM 1:3, 20mm thick

367 : Providing wooden (melamine) polish for new wood

379.5.1: S&F of Granite tile of size 2'x1', 10mm thick for flooring (Ruby Red, Raw Silk) (using crushed stone sand)

448.2: Supply and fixing 32mm dia PVC Tee with end cap

ANNEXURE-II A1: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete.

A2: Stucco Plastering 12mm thick using hard broken stone chips of size 10mm and below using 86.50 kgs of cement and 0.15 m³ blue metal chips for every 10m² area over the existing plastered surface including curing etc., all complete.

A3: Painting the new walls with one coat Plastic Emulsion Paint including Primer etc., all complete.

A4: Supplying and fixing of CP Angle cock Tap with fittings of approved make (ISI) including cost of material and labour charges for fixing etc., all complete and as directed by the departmental officers.

A5: Supply and fixing of CP Two Way Bib Cock with Health Faucet with ISI mark of best approved quality including cost of material and labour charges for fixing etc., all complete and as directed by the departmental officers.

A6: Supplying and fixing of 15 Amps 3 pin flush type plug socket on suitable MS box of 16g thick concealed and covered with 3 mm thick laminated hylem sheet and 32 Amps Double pole MC with Switch board itself inclusive of all materials, etc., all complete and as directed by the departmental officers.

A7: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety b) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A8: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A9: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A10: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A11: Providing one coat of Wallputty for new plastered surfaces

A12: Supplying, fabrication and fixing in position of mild steel angle truss including cost of materials and labour charges etc., all complete and as directed by the departmental officers.

A13: Supplying and delivery of following God - rej nav-tal lock including all cost of lock etc., complete. a) 7 Lever with 3 keys

A14: Supplying and delivery of following dia UPVC/PVC Specials of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., .all complete and as directed by the departmental officers. a) 50mm dia UPVC Coupler

b) 50mm dia UPVC Elbow

c) 50mm dia UPVC Tee

d) 50mm x 40mm dia UPVC Reducer

A15: Supplying and delivery of following dia GI/GM SpecIals of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., all complete and as directed by the departmental officers. a) 50mm dia GI Union

b) 50mm dia GI Bend

c) 50mm dia GI Hex Nipple

d) 32mm dia GI Gun metal Gate valve (Heavy Duty)

e) 50mm dia G.M. Non Return valve

f) 80mm dia G.I Bend

A16: Supplying and fixing of following size Aluminium letters with approved Coloured powder coated finishing matt for fixing in position cost and conveyance of all materials. a) 9" Height Aluminium letters

b) 12" Height Aluminium letters

c) 45cm Round Logo (18")

d) 60cm TNPHC Emblem (23")

A17: Supplying and fixing of Plastic name board of size 45 cm X 10 cm (18"x4") with Stikness cut in computer to the depth including cost & fixing charges etc., all complete.

A18: Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., all complete and as directed by the departmental officers. (the quality and the brand of material should be got approved by the executive engineer before use)

A19: Supplying and laying of following dia UPVC pipe of best and approved quality having ISI mark including cost of coveyance and delivery at site of work including earth work excavation, laying charges and cost of specials etc., all complete and as directed by the departmental officers. (Below GL) a) 32mm dia UPVC pipe

b) 50mm dia UPVC Pipe

A20: Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing

A21: Supplying and fixing of 40A - FP Isolator of best and approved quality having ISI mark including cost of material and labour charges etc., .all complete and as directed by the departmental officers.

A22: Supply and fixing of 8 way SP DB of 16A / way with 16A DP switch with Metal clad of 500V with fuse and neutral on (front handle) on suitable TW board with earth connection only

A23: Supplying and laying of following dia GI pipe "B" Class of best and approved quality having ISI mark including cost of coveyance and delivery at site of work including earth work excavation, laying charges and cost of specials etc., all complete and as directed by the departmental officers. (Below GL) a) 80 mm dia GI Pipe "B" Class (Below Ground Level)

A24: Supplying, laying and fixing of following dia GI pipes "B" Class of best approved quality in walls including cost of pipes and labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc., all complete and as directed by the Departmental officers. a) 80 mm dia GI Pipe "B" Class (Above Ground Level)

A25: Supply and fixing of Single pole 6 Amps, 10 KA MCB including cost of all materials, labour charges and erection charges etc., all complete as per relevant standard specification and as directed by the departmental officers. ( The materials should be got approved from the EE before use)

A26: Supply and fixing of 900x700x250 mm tk eb service panel for 415 volt,3 phase, 4 wire 50 hz power distrbution system.the panel shall be indoor wall mouting type out of 16swg sheet steel complete with all accessories. in comng 1no 300amps bus bar compartment and separate energy meter compartment outgoing 3no 300amps fuse with base includng all necessary connection etc..

A27: Supplying and delivery of following PVC aluminium armoured LTUG 1100V grade with ISI mark including cost of cable and conveying to the site of work etc., all complete and as directed by the departmental officers. [The brand and quality of the UG cable should be got approved from the Executive Engineer before use]. a) 3.5 core 50 sq.mm.

A28: Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection a) 3.5 core 50 sq.mm.

A29: Supply and providing cable end termination for following PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete a) 3.5 core 50 sq.mm.

A30: Labour charges for conveying and laying of LT/UG cable excluding Civil works etc., complete for UG cable of size 4 to 25 sq.mm and 2,3,3.5 and 4 core etc., complete as directed by the departmental officers. (Below ground level)

A31: Labour Charges for Conveying and Fixing of UG Cable of size of 4 to 25 Sq.mm and 2/3,3 1/2 and 4 core on wall / ceiling charges for conveying fixing of UG cables with necessary MS clamps, brass screws including cost of materials and redoing the dismantled portion in the original position etc., all complete and fixing of UG cables on walls and ceiling etc., as directed by the departmental officers. (Above ground level)

A32: Supply and delivery at site and fixing of 900 x 900mm size SFRC manhole cover with frame with locking arrangement including cost of all materials and labour charges for fixing in position etc., all complete and as directed by the departmental officers.

Haarine Associates (BID ID -1252829)