Loading
Loading…
Loading…
Tender Value
₹37.6 Cr
EMD Value
₹75.2 L
Closing Date
16 Sept 2026, 12:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
S AND T
14 conditions · 2 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE-I/CT/GCC-2022/Policy Dt:14.07.2022 )
Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Definition of Similar Nature of work : Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Interlocking /Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking or Electronic Interlocking sections. OR Provision of Automatic signalling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPACs/Digital Axle counters at Panel Interlocking stations/Electronic interlocking stations.
18 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
BID CAPACITY: For tenders having advertised value more than Rs.10.00 crorewherein eligibility criteria includes bid capacity also (ACS No: 11,dt: 13.03.2026), the tenderer will be qualified only if its availablebidcapacity is equal to or more than the total value of thepresent tender. As per the Advanced Correction slip No. 01 dt:14.07.2022 of GCC April 2022. (CA certificate is required alongwith the tender. In case, the tenderer failed to submit the abovecertificate along with offer, his / their bid will be RejectedSummarily).
EI condition: The successful bidder shall submit an undertakingfrom RDSO approved EI OEM, before the supply of material, toconfirm compliance with extant RDSO guidelines and to meetcontract specific requirement. (Vide Rly Board Lr.No.2013/Sig/23/(pt)Dup Dt:17.02.2022)
1. Signaling arrangements for Elimination of end cabins by integrating their operations with Ramagundam station and the Bypass cabin. 2. Signaling and Telecom arrangements for proposed new crossing station at Km No. 8 - 9 between RDM - GDK line on deposit terms. (Deposit work)."
C_SG_36_619~SCR
C_SG_36_619
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹75.2 L
24 Aug 2026
24 Aug 2026
2 Sept 2026
436 items across 6 schedules · ₹37,59,65,525.08 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Permanently lubricated HDPE Duct with outer diameter of 40mm and inner diameter of 33mm as per specification RDSO/SPN/TC/45/2013 Revision 2.0. The length of the duct shall be 1km. Two end plugs shall be provided along with the drum. (To Be Inspected by RITES) | Kilometre | 26.00 | 66,223 | 17,21,798 |
| 2 | Supply of Plastic couplers - Slip fit / push type for permanently lubricated HDPE duct.(To Be Inspected by CONSIGNEE) | Numbers | 40.00 | 85 | 3,400 |
| 3 | Supply of End plug for permanently lubricated HDPE duct(To Be Inspected by CONSIGNEE) | Numbers | 30.00 | 34 | 1,020 |
| 4 | Supply of Cable sealing plugs for permanently lubricated HDPE duct.(To Be Inspected by CONSIGNEE) | Numbers | 20.00 | 43 | 860 |
| 5 | Supply of appropriate OFC patch cords (1 .5 meter long) as per direction of Engineer In charge, having insertion loss less than or equal to 0.1dB as per Telecommunication Engineering Centre (TEC) standard TEC 87070:2009 with GR TEC/T/OFCOFJ/ 155/2013 or latest. SC - LC TYPE.(To Be Inspected by CONSIGNEE) | Numbers | 20.00 | 1,770 | 35,400 |
| 6 | Supply of Rotary duct cutter suitable for cutting HDPE ducts of diameter 20mm to 42mm. The duct cutter shall have a facility of replaceable blades. The blades shall be of high carbon steel(To Be Inspected by CONSIGNEE) | Numbers | 8.00 | 1,046 | 8,368 |
| 7 | Supply of Thermo shrink jointing kit for jointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77- 2012 Rev. 3 (Amd. 1 to Amd. 3) or latest.(To Be Inspected by RITES) | Numbers | 121.00 | 3,715 | 4,49,515 |
| 8 | Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/2378 (Single) (Apparatus case Single)(To Be Inspected by RITES) | Numbers | 177.00 | 16,216 | 28,70,232 |
| 9 | Supply of GKP type Location Boxes Half size drg. No. S&T/MFT/2378 (Half) (Apparatus case Half)(To Be Inspected by RITES) | Numbers | 50.00 | 8,083 | 4,04,150 |
| 10 | "Supply of 'E' type locks of different wards as per requirement with key per E- type lock to Drg. No. SA.3376 / M / Latest and RDSO Specn. No. IRS. S.30 / 64.Note: The ward number as per the site requirement directed by site RLY supervisor."(To Be Inspected by RITES) | Numbers | 227.00 | 1,051 | 2,38,577 |
| 11 | Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box.(To Be Inspected by CONSIGNEE) | Numbers | 163.00 | 853 | 1,39,039 |
| 12 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19).(To Be Inspected by CONSIGNEE) | Numbers | 320.00 | 195 | 62,400 |
| 13 | "Supply of the following resistors / condensers / diodes.a) 50V, 470µF electrolytic capacitor - 20 Nos.b) 50V, 1000µF electrolytic capacitor - 20 Nos.c) 50V, 2200µF electrolytic capacitor - 20 Nos.d) 100, 10W wire wound resistance - 20 Nos.e) BY127 diode - 10 Nos.f) PVC Insulation tapes of 25m length - 25 Nos"(To Be Inspected by CONSIGNEE) | Set | 12.00 | 3,766 | 45,192 |
| 14 | Supply of Surface Base 140mm dia. CLS post as per DRG.. No. S 2011/M(To Be Inspected by RITES) | Numbers | 10.00 | 3,476 | 34,760 |
| 15 | Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest. 3.5 Meters long.(To Be Inspected by RITES) | Numbers | 10.00 | 4,442 | 44,420 |
| 16 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe.Ladder for 3.5m post as per DRG.. No. SA 23150, S 2033 or latest"(To Be Inspected by RITES) | Set | 10.00 | 5,226 | 52,260 |
| 17 | Supply of CLS Post 140mm dia to specification IRS:S 6-81 Rev.3 or latest. 4.5 Meters long(To Be Inspected by RITES) | Numbers | 10.00 | 4,710 | 47,100 |
| 18 | "Supply of CLS Ladder set complete with staging/platform, supports, cast iron ladder base/Shoe.Ladder for 4.5m post as per DRG.. No. SA 23150, S 2033 or latest"(To Be Inspected by RITES) | Set | 10.00 | 6,432 | 64,320 |
| 19 | "Supply of Metallic (MS) colour light Signal Unit.2 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest"(To Be Inspected by RITES) | Numbers | 10.00 | 12,998 | 1,29,980 |
| 20 | "Supply of Metallic (MS) colour light Signal Unit.3 aspect complete as per DRG.. No. SA. 23003/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest"(To Be Inspected by RITES) | Numbers | 10.00 | 17,623 | 1,76,230 |
| 21 | "Supply of Metallic (MS) colour light Signal Unit. 4 aspect complete as per DRG. No. SA. 23001/A/M (Adv.) with latest amendment and specification IRS: S 26-64 or latest."(To Be Inspected by RITES) | Numbers | 10.00 | 18,820 | 1,88,200 |
| 22 | Supply of Offset Bracket to suit 140mm dia CLS post with two numbers of U bolts and nuts complete. .(To Be Inspected by RITES) | Numbers | 25.00 | 4,938 | 1,23,450 |
| 23 | "Supply of Junction type / Direction type route indicator as per specification IRS:S 66-84 Amd. 1 or latest.Four way to drawing no.SA.23404"(To Be Inspected by RITES) | Numbers | 10.00 | 27,612 | 2,76,120 |
| 24 | Supply of Calling On Signal Unit complete with U Bolts as per RDSO DRG. No. SA.24351 (Adv.) or latest.(To Be Inspected by RITES) | Numbers | 30.00 | 4,740 | 1,42,200 |
| 25 | Supply of Ground type position light shunt signal complete with base, pipe, arrow mark and hoods as per RDSO DRG. No. SA 23840 or latest.(To Be Inspected by RITES) | Numbers | 45.00 | 6,083 | 2,73,735 |
| 26 | Supply of Post type position light shunt signal with hoods, arrow mark and offset bracket to suit 90mm sockets (CLS) with two numbers of 'U' bolts and nuts complete to fix shunt signal below main stop signal as per RDSO DRG. No. SA 23840 or latest(To Be Inspected by RITES) | Numbers | 30.00 | 3,502 | 1,05,060 |
| 27 | "Supply of Ground connections for point machinesGround connections for universal point machine143 mm with 'D' type clamp for 52kg/ 60kg/ 90R rail as per Drg. No. RDSO / S3267-74"(To Be Inspected by RITES) | Set | 28.00 | 8,670 | 2,42,760 |
| 28 | "Supply of following ground connections suitable for220mm electric point machine & thick web switch as per drawing No.RDSO/S- 3454AltB or latest(a) Lock long rod as per RDSO Drgno3596Alt-1 :1 no.(b) Lock short rod as per RDSO Drg no3597 :1 no(c) Detector long rod as per RDSO Drg no3594Alt-1:1no(d) Detector short rod as per RDSO Drg no3595 : 1no P Bracket: 2nos"(To Be Inspected by RITES) | Set | 10.00 | 14,160 | 1,41,600 |
| 29 | "Ground connection insulations for thick web switch layout facing point (BG) for 52kg/60kg rail fitted with high thrust point machine comprising of the following:1. Bush as per DRG.No.S3463-1no.and Washer as per DRG. No.S8640-2no.for drive (throw) rod2. Bush as per DRG.No.S 23199-1no and Washer as per DRG. No. S 8640-2no for short detector rod.3. Bush as per DRG.No.S 23199-1no and Washer as per DRG.No.S 8640-2no for long detector rod.4. Bush as per DRG.No.S 22179-1no and Washer as per DRG .No. S 8640-2no for short lock rod.5. Bush as per DRG.No.S 22179-1no and Washer as per DRG. No .S 8640-2no for long lock rod.6. Bush 'B' as per DRG.No.S 8912 for LH lock slide-1 no.7. Bush 'B' as per DRG.No.S 8912 for LH lock arm-2 no.8. Bush 'B' as per DRG.No.S 8912 for RH lock arm -2 no.9. Bush 'B' as per DRG.No.S 8912 for RH lock slide-1no.10. Bush as per DRG.No.S 23199 -4no and washer as per DRG.No.S 8640-4no for LH lock slide.11. Insulating Plate LH as per DRG.No.S 3404 RDSO/S 3593- 1no.12. Insulating Plate RH as per DRG.No.S 3404 RDSO/S 3592- 1no.13. Bush as per DRG.No.S 23199-4no and washer as per DRG.No.S 8640-4no for RH lock slide."(To Be Inspected by RITES) | Numbers | 12.00 | 1,074 | 12,888 |
| 30 | Insulations for 'D' clamp switch extension bracket to suit to universal point machine as per drawing RDSO / S3361-62 supplied by railways. One set consists of 'D' clamp insulation-2nos, Nylon insulation bushes- 4nos., and Nylon insulation washers-8Nos.) (To Be Inspected by RITES) | Set | 34.00 | 729 | 24,786 |
| 31 | Drive lug insulation for universal point machine as per drawing RDSO / S 3361- 62 (One set consists of one number central insulation plate, bushes-2 no's and washer-4 Nos.)(To Be Inspected by RITES) | Set | 34.00 | 160 | 5,440 |
| 32 | Supply of GI termination box (10 SWG) for point machine of size 45 cmx23 cmx12 cm with double coat of enamel paint (outside: Black & inside: white) along with 2no's of MS angle of size 50 x 50 x 6mm of length 1000mm each, 2 numbers of 40mm GI pipe of length 450 mm & 150 mm with nuts/washers and teak wood plank of size 40 mmx25 mm for fixing of terminals. (All materials are to be arranged by the contractor).(To Be Inspected by CONSIGNEE) | Numbers | 34.00 | 2,902 | 98,668 |
| 33 | Supply of 50V, 10000µF electrolytic condenser of reputed brands like Philips / Keltron or similar(To Be Inspected by CONSIGNEE) | Numbers | 68.00 | 486 | 33,048 |
| 34 | Supply of Track feed battery charger to work on 110V AC for charging1or 2 or 3 or 4 lead acid cell of 80AH (10Amps) used in track circuit as per RDSO Specn. No. IRS.S.89/2013 Ver 1.0 latest.(To Be Inspected by RDSO) | Numbers | 105.00 | 8,294 | 8,70,870 |
| 35 | Supply of Track Feed Regulating Resistance disk type 0 to 30 as per DRG. No. SA 20161 66 / M or latest. To be procured from RDSO approved firms.(To Be Inspected by RDSO) | Numbers | 105.00 | 358 | 37,590 |
| 36 | Supply of B type chokes to as per specification IRS: S65- 83 Amd.1 or latest.(To Be Inspected by RDSO) | Numbers | 210.00 | 2,313 | 4,85,730 |
| 37 | "Supply of Track lead junction boxes fibre glass as per DRG.No.CWM-00597 of F.R.P material to and specification IRS:S 23 along with fixtures i.e., one MS angle 50mmx50mmx5mm, 0.9m long, two numbers of G.I pipes of 25 mm dia, 500 mm long along with nuts and bolts and 500 mm long (grommet bushes, 60 mm ARA terminals-2 No's). (This includes gromile bushes,60mm PBT Terminals).".(To Be Inspected by CONSIGNEE) | Numbers | 525.00 | 1,546 | 8,11,650 |
| 38 | Supply of Channel bond pins 7mm dia single groove as per specification IRS: S 17-75 Amd.1 or latest.(To Be Inspected by CONSIGNEE) | Numbers | 5500.00 | 3 | 16,500 |
| 39 | Supply of titanium coated 7.2 mm drill bits of TATA make.(To Be Inspected by CONSIGNEE) | Numbers | 350.00 | 146 | 51,100 |
| 40 | Supply of Distilled water for topping of secondary cells as per specification IS 1106 or latest..(To Be Inspected by CONSIGNEE) | Litre | 3000.00 | 10 | 30,000 |
| 41 | Supply of Hydrometer as per IS: 3104 (Part II)-1982 or latest(To Be Inspected by CONSIGNEE) | Numbers | 10.00 | 277 | 2,770 |
| 42 | Supply of Surveyor's Wheel (rodometer).(To Be Inspected by CONSIGNEE) | Numbers | 5.00 | 4,245 | 21,225 |
| 43 | Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz AC / DC fully insulated and no-load RPM shall be 1900 / 1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 no's of 7.2 mm dia Bosch MSS drill bit, Drill check dia. 13 mm and drilling dia in steel 8 mm / 13 mm along with packing accessories.(To Be Inspected by CONSIGNEE) | Numbers | 6.00 | 22,602 | 1,35,612 |
| 44 | Supply of Galvanised Wire rope 6/19 steel, 6 mm dia with fibre core as per specification IS 3459/2004 or latest(To Be Inspected by CONSIGNEE) | Kg | 300.00 | 80 | 24,000 |
| 45 | Supply of Galvanised Wire rope 6/19 steel, 6 mm dia with fibre core as per specification IS 3459/2004 or latest, with PVC sheathing 2 mm thick, type 6 compound IS 5831/1979 or latest (outer dia10 mm)(To Be Inspected by CONSIGNEE) | Kg | 300.00 | 120 | 36,000 |
| 46 | Supply of Single Section Digital Axle Counter (SSDAC) as per specification No. RDSO/SPN/177/2012 Ver. 3.0 or latest within built event logger card.(To Be Inspected by RDSO) | Set | 14.00 | 6,74,335 | 94,40,690 |
| 47 | "Axle detectors (each set consists of 2 numbers Tx and 2 numbers Rx coils)Note: Make and version of AXC coils will be decided by the site RLY supervisors as per site requirement."(To Be Inspected by RDSO) | Set | 12.00 | 55,951 | 6,71,412 |
| 48 | "Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest.Transformer-rectifier set with 110V AC input, 24V-30V DC output, 1A."(To Be Inspected by RDSO) | Numbers | 7.00 | 19,470 | 1,36,290 |
| 49 | "Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest.Transformer-rectifier set with 230V AC input, 24V-30V DC output, 5A."(To Be Inspected by RDSO) | Numbers | 7.00 | 25,960 | 1,81,720 |
| 50 | Supply of Battery Charger of Various capacity 230V AC / 110V DC, 30A single phase, signalling / telecom. Installation as per specification IRS: S 86-2000 Amd. 4 or latest. (To Be Inspected by RDSO) | Numbers | 5.00 | 1,10,464 | 5,52,320 |
| 51 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable).QN1- 8F/8B, 24 V DC. The interlocking code: ABCDF.(To Be Inspected by RDSO) | Numbers | 190.00 | 4,400 | 8,36,000 |
| 52 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable).QN1-12F/4B, 24 V DC. The interlocking code: ABCDE.(To Be Inspected by RDSO) | Numbers | 190.00 | 4,283 | 8,13,770 |
| 53 | QNA1- 8F/8B, Interlocking Code: ABDGH as per Spec BRS 931 A or Latest(To Be Inspected by RDSO) | Numbers | 190.00 | 4,738 | 9,00,220 |
| 54 | QNA1-12F/4B, DC Neutral Line Relay, Interlocking Code: ABDFH as per Spec BRS 931 A or Latest(To Be Inspected by RDSO) | Numbers | 190.00 | 4,413 | 8,38,470 |
| 55 | QNA1K-6F/6B, Interlocking Code: CDEKY as per Spec BRS 931 A or Latest and RDSO letter No.STS/E/Relays/UEA (PI) dated 30/05/97 (Annexure-II).(To Be Inspected by RDSO) | Numbers | 150.00 | 5,062 | 7,59,300 |
| 56 | QSPA1- 8F/4B, The interlocking code: ABDEJ, Spec BRS 933A or latest.(To Be Inspected by RDSO) | Numbers | 105.00 | 6,465 | 6,78,825 |
| 57 | "Supply of Q series Magnetically Latched (QL1) type Relay,24V DC, complete with plug board with connectors and retaining clips confirming to BRS 935A and RDSO specification IRS S:34 & IRS S:23 or latest.QL1- 11F/4B, The interlocking code: ABDEG"(To Be Inspected by RDSO) | Numbers | 100.00 | 5,701 | 5,70,100 |
| 58 | Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips).(To Be Inspected by RDSO) | Numbers | 230.00 | 5,841 | 13,43,430 |
| 59 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). QBCA1- 2HF/4B, Interlocking code: BCEJK as per specifications BRS 943 or Latest(To Be Inspected by RDSO) | Numbers | 129.00 | 8,307 | 10,71,603 |
| 60 | Supply of AC immune, plug-in type, Style 'QTA2', 2F/1B DC Neutral track relay for railway signalling track circuits with coil resistance 9 ohm, complete with plug board, retaining clip and connectors as per specifications: BRS 939A & 966 or Latest, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) with interlocking code FGHKX. (To Be Inspected by RDSO) | Numbers | 105.00 | 4,806 | 5,04,630 |
| 61 | Supply of Fail-Safe Electronic Time Delay Device mounted on Q series relay band enclosed within Q series relay cover complete with plug board, retaining clip and connectors as per specifications IRS: 61-2000 Amd. 3 or latest, IRS: S23-88 Amd. 1 or latest, IRS: S 34- 68 Amd. 6 or latest IRS 67-85 (as applicable). The device shall work on 24V DC and shall give 24V DC output after the specified time delay.Time delay of 120 seconds. Interlocking code: AFGKY.(To Be Inspected by RDSO) | Numbers | 2.00 | 2,332 | 4,664 |
| 62 | Supply of 60 core Indoor Cable with 0.6mm conductor diameter as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest.(To Be Inspected by RITES) | Kilometre | 3.50 | 1,91,009 | 6,68,531.5 |
| 63 | Supply of PVC insulated Wire Coils Multi- strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge. (To Be Inspected by RDSO)(ITEM UNIT IS COIL) | Numbers | 800.00 | 1,153 | 9,22,400 |
| 64 | Supply of PVC insulated Wire Coils Multi- strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge.(To Be Inspected by RDSO)(ITEM UNIT IS COIL) | Numbers | 104.00 | 2,908 | 3,02,432 |
| 65 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100- meter coil. Colour to be specified by Engineer in charge.(To Be Inspected by RDSO) | Metre | 500.00 | 391 | 1,95,500 |
| 66 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge.(To Be Inspected by RDSO) | Metre | 500.00 | 178 | 89,000 |
| 67 | Supply of 10 Sq.mm PVC insulated, multi- strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil.(To Be Inspected by RDSO) | Metre | 6200.00 | 124 | 7,68,800 |
| 68 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) Fuse holder 20A capacity(To Be Inspected by RDSO) | Numbers | 550.00 | 220 | 1,21,000 |
| 69 | Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge.(To Be Inspected by RDSO) | Numbers | 1300.00 | 31 | 40,300 |
| 70 | Supply of Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest.(To Be Inspected by RDSO) | Numbers | 1000.00 | 97 | 97,000 |
| 71 | Supply of Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest.(To Be Inspected by RDSO) | Numbers | 1900.00 | 406 | 7,71,400 |
| 72 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO / SPN / 189 / 2004 Ver. 3.0 or latest consisting the following parts:a) 2 conductor disconnect terminal block - 6 numbersb) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 numberc) Screw less end stop similar to WAGO Model No. 249-117 -2 numbersd) Insulated jumper WAGO Model 280-402 - 5 numberse) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set)"(To Be Inspected by CONSIGNEE) | Set | 2100.00 | 703 | 14,76,300 |
| 73 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos.(To Be Inspected by CONSIGNEE) | Set | 26.00 | 64 | 1,664 |
| 74 | Supply of Stationary low maintenance secondary lead acid cells as per RDSO specification IRS: S88-2004 or latest. This includes supply of inter cell connectors, bolts, nuts, acid level indicating floats and vent plugs.2V, 80AH( TO BE INSPECTED BY RDSO ) | Numbers | 780.00 | 3,315 | 25,85,700 |
| 75 | Supply of Stationary low maintenance secondary lead acid cells as per RDSO specification IRS: S88-2004 or latest. This includes supply of inter cell connectors, bolts, nuts, acid level indicating floats and vent plugs.2V, 200AH( TO BE INSPECTED BY RDSO ) | Numbers | 180.00 | 5,665 | 10,19,700 |
| 76 | Supply of Stationary low maintenance secondary lead acid cells as per RDSO specification IRS: S88-2004 or latest. This includes supply of inter cell connectors, bolts, nuts, acid level indicating floats and vent plugs.2V, 300AH( TO BE INSPECTED BY RDSO ) | Numbers | 180.00 | 7,060 | 12,70,800 |
| 77 | Supply of powder coated Relay rack (2 Way) universal type as per DRG. No. S&T / MFT / 291. The relay rack shall be supplied with scaffolding, stainless steel nuts and bolts for fixing the rack, supporting angles, frame mounting triangle base with 'J' bolts, insulation of required numbers and suitable inner frames to suit Q style relays / K50 pre wired tag blocks.(To Be Inspected by CONSIGNEE) | Numbers | 16.00 | 14,847 | 2,37,552 |
| 78 | Supply of powder coated Cable termination rack of size 880mm x 2075mm made using 50mm x 50mm x 6mm (6mm thickness) MS angles. The cable termination rack shall be supplied with stainless steel nuts and bolts for fixing the rack, tripod bases and reel insulators (for K rack, P rack and power rack), cable ladder of 400mm width and 2075mm length with two angles of size 40mm x 40mm x 5mm (5mm thickness) and supporting flats of size 25mm x 25mm. Suitable holes shall be drilled to fit hylam sheet as per standard practice(To Be Inspected by CONSIGNEE) | Numbers | 16.00 | 7,585 | 1,21,360 |
| 79 | Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size:Hylam Sheet of size: 2400mm x1200mmx6mm.(To Be Inspected by CONSIGNEE) | Numbers | 16.00 | 7,124 | 1,13,984 |
| 80 | Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size:Hylam Sheet of size: 2400mmx600mm x6mm.(To Be Inspected by CONSIGNEE) | Numbers | 16.00 | 3,430 | 54,880 |
| 81 | Supply of Hylam sheet, resin bonded, grade P3 as per IS specification IS 2036 of 1974 or latest of following size:Hylam Sheet of size: 2400mm x600mm x3mm.(To Be Inspected by CONSIGNEE) | Numbers | 16.00 | 1,888 | 30,208 |
| 82 | Supply of Lugs and Eyelets:Aluminium lugs 25 sq.mm of reputed make.(To Be Inspected by CONSIGNEE) | Numbers | 1200.00 | 25 | 30,000 |
| 83 | Copper lugs 10sq.mm of reputed make.(To Be Inspected by CONSIGNEE) | Numbers | 6000.00 | 12 | 72,000 |
| 84 | Copper eyelets to suit 16/0.2 wire Dowell's or similar make.(To Be Inspected by CONSIGNEE) | Numbers | 12000.00 | 3 | 36,000 |
| 85 | Copper eyelets to suit 10.sqmm wire Dowell's or similar make.(To Be Inspected by CONSIGNEE) | Numbers | 6000.00 | 6 | 36,000 |
| 86 | Supply of 200 way tag block as per specification IRS: S 77/2006 Rev. 1.0 or latest and DRG. No. SA 24751 or latest.(To Be Inspected by CONSIGNEE) | Numbers | 18.00 | 1,439 | 25,902 |
| 87 | "Supply of basic material to construct unit Maintenance Free Earth as per specification RDSO/SPN/197 Ver. 1.0 or latest consisting of the following:a) Copper bonded steel electrode 3m long, 17mm diameter with copper bonding thickness mini 250 micron and UL listed and marked - 1 No.b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of minimum 10kg - 3 Nos.c) Copper strip with dimensions 150 x 25 x 6mm to terminate earth rod - 1 No.d) Copper strip with dimensions 300 x 25 x 6mm Main Equi- potential Earth Bus bar (MEEB) - 1 No.e) Copper strip of with dimensions 150 x 25 x 6mm Sub Equi- potential Earth Bus bar (SEEB) - 1 No.f) 35 Sq.mm multi-strand PVC insulated Copper Cable (15 meter). "(To Be Inspected by RDSO) | Set | 48.00 | 16,837 | 8,08,176 |
| 88 | Supply of 50mm x 6mm GI tape for interconnecting earth electrodes.(To Be Inspected by CONSIGNEE) | Metre | 1400.00 | 546 | 7,64,400 |
| 89 | Supply of MODEM compatible with existing UFSBI system to work on backup media (either VF-channel on OFC P/Mux or 2 MBPS E1 channel from STM or direct dark single mode 1- Core, optic fiber cable up to 30 Km distance). The required type must be mentioned while ordering.(To Be Inspected by RDSO) | Pair | 2.00 | 78,970 | 1,57,940 |
| 90 | Supply of Industrial grade E1 Modem (with 1+1 hot standby E1 uplink) for UFSBI with 6 no. of RS232 & 8 nos. E&M VF channel (individually configurable to 2/4 wire by simple hardware switch) suitable for connecting UFSBI Block along with UP & DN Line HASSDAC and 100% spare channels. Working on dual DC 24/48 Volts supply in hot- standby mode.(To Be Inspected by RDSO) | Pair | 2.00 | 2,04,130 | 4,08,260 |
| 91 | Supply of Automatic media changeover of Modems working on redundant channels for data transmission on OFC/Quad compatible with existing UFSBI(To Be Inspected by RDSO) | Pair | 2.00 | 35,326 | 70,652 |
| 92 | "Supply of Data Logger of following capacity for remote monitoring of signalling parameters and power supply arrangements with network as per specification IRS: S 99- 2006 Amd. 3 or latest with 64 input digital card as a spare and fuse monitoring PCBs for monitoring at least fifty 2A fuses with inbuilt modem cards for networking.Data Logger with 512 digital inputs and 32 analog inputs" (To Be Inspected by RDSO) | Set | 5.00 | 4,97,388 | 24,86,940 |
| 93 | Supply o f Protocol Converter f o r Electronic Interlocking including software required for networking.(To Be Inspected by RDSO) | Numbers | 5.00 | 49,373 | 2,46,865 |
| 94 | Supply of Safety Point Alarm unit to alert ASM to set the points against the blocked line..(To Be Inspected by CONSIGNEE) | Numbers | 2.00 | 69,582 | 1,39,164 |
| 95 | Supply of 80 column Dot Matrix Printer Model No. Epson LQ300/LX300 or similar with serial port.(To Be Inspected by CONSIGNEE) | Numbers | 5.00 | 13,177 | 65,885 |
| 96 | Supply of Printer for maintenance terminal at station - HP LaserJet 1020 Plus or similar.(To Be Inspected by CONSIGNEE) | Numbers | 5.00 | 16,135 | 80,675 |
| 97 | "Supply of Earth Leakage Detector (ELD) with configuration specified by Engineer In charge and as per specification RDSO/SPN/256/2002 or latest with insulated tester, test probes, Mounting stand and Fuse board to isolate from distribution board as per requirement of channels.Twelve channel Earth Leakage Detector."(To Be Inspected by RDSO) | Set | 2.00 | 1,90,261 | 3,80,522 |
| 98 | Supply of Teak Wood Block Counter suitable for DAIDO / NBT block instruments as per standard drawing. & instructions of engineer in charge(To Be Inspected by CONSIGNEE) | Numbers | 2.00 | 14,721 | 29,442 |
| 99 | Supply o f Filter Unit f o r u s e i n conjunction w i t h block instrument as per specification IRS: S 68-89 or latest.(To Be Inspected by RITES) | Numbers | 2.00 | 15,500 | 31,000 |
| 100 | Supply of Block Bell Equipment as per specification IRS: TC 44-88 with Amd. 1 or latest.(To Be Inspected by RITES) | Numbers | 2.00 | 2,604 | 5,208 |
| 101 | Supply of Solid State Buzzers with different frequencies in metallic / plastic casing working on 12V - 24V - 60V.(To Be Inspected by CONSIGNEE) | Numbers | 30.00 | 300 | 9,000 |
| 102 | Supply of following type of Terminal block of Wago Make or Similar (with lever type disconnection & reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor. 24 pair(To Be Inspected by CONSIGNEE) | Numbers | 44.00 | 3,240 | 1,42,560 |
| 103 | Supply of VF Transformer with impedance ratio 470 : 600 ohms or 1120 : 600 (Type 4) or 1120 : 470 (Type 3) as per specification IRS : TC 22-76 or latest.(To Be Inspected by RITES) | Numbers | 24.00 | 909 | 21,816 |
| 104 | Supply of VF Transformer 2T assembly of type 2 with impedance ratio 470: 1120 ohms as per specification IRS: TO 76 -2000 with Amd. 1 or latest.(To Be Inspected by RITES) | Numbers | 34.00 | 999 | 33,966 |
| 105 | Supply of Cable Route Locator set consisting of receiver with active line trace frequency, passive line trace and depth measurement on active line tracing with 5 watts cable line transmitter with frequency indicator, power indicator, frequency mode sheet, power 'ON' & 'OFF' indicator mode toggle induction mode. High voltage warning and suitable rechargeable cells for both transmitter and receiver with suitable charger with carrying case. Make RIDGID SeekTech SR-20/ Stanlay ST-Loc 10 or equivalent or better as approved by Engineer In charge.(To Be Inspected by CONSIGNEE) | Per Unit | 2.00 | 3,77,600 | 7,55,200 |
| 106 | "Supply of Tool Kit as under -1. Standard Tool Bag (CANAVAS) - 1 No.2. Soldering Iron (Make Soldern / Philips) - 60W / 230V -1 No.3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No.4. Screw Driver set of 6 pieces (Taparia Make) - 1 No.5. Cutting plier 6" (Taparia Make) - 1 No.6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No.7. Nose plier 6" (Taparia Make) - 1 No.8. Wire stripper (Taparia Make) - 1 No.9. Fiber tape 3m length - 1 No.10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material)11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No.12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No.13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. ""14. Hacksaw frame with blade 6"", 4" width (for cutting cable) - 1 No.15. Hammer 3.0 lb - 1 No.16. Chisel 6" (for cutting bond wire) - 1 No.17. Poker 8" (for removing bond wire, bond pin) - 1 No.18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No.19. Test piece (Point wedge piece) - 1 No.20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No.22. Box spanner for 6 way terminals (13mm) - 1 No.23. Nylon brush (for cleaning purpose) - 1 No.24. Sealing plier - 1 No.25. Crimping Tool (1.5 to 16sq.mm) - 1 No.26. Feeler gauge - 1 Set27. TSR Meter (for testing condition of track circuit) - 1No.28. Wooden Block (60mm x 60mm) - 1 No.29. Track shorting clips - 1 No.30. Tester - 1 No.31. Flat file 12" length x 1" width - 1 No.32. Clip on meter - 1 No.33. Digital Earth meter - 1 No. 34. Meggar - 1 No. "(To Be Inspected by CONSIGNEE) | Set | 5.00 | 46,332 | 2,31,660 |
| 107 | Supply of Feather lite table of Model No. V-MT 1890 & V- 2D+1F or similar(To Be Inspected by CONSIGNEE) | Set | 11.00 | 29,573 | 3,25,303 |
| 108 | Supply of Godrej PCH 5002T model or similar(To Be Inspected by CONSIGNEE) | Numbers | 13.00 | 10,671 | 1,38,723 |
| 109 | Supply of steel stools 18" height neatly finished and painted.(To Be Inspected by CONSIGNEE) | Numbers | 38.00 | 489 | 18,582 |
| 110 | Supply of Fibre table of 4 Feet x 2 Feet one number and fibre chairs two numbers. They should be of standard make and quality like Neelkamal or Similar.(To Be Inspected by CONSIGNEE) | Set | 10.00 | 2,099 | 20,990 |
| 111 | Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar(To Be Inspected by CONSIGNEE) | Numbers | 12.00 | 26,479 | 3,17,748 |
| 112 | Supply of HDPE jerry can of 20 litres capacity. The jerry can shall be supplied at site as per the requirement of site in- charge.(To Be Inspected by CONSIGNEE) | Numbers | 16.00 | 154 | 2,464 |
| 113 | Supply of Godrej Navtal Locks with diameter of 50mm with 3 keys.(To Be Inspected by CONSIGNEE) | Numbers | 50.00 | 563 | 28,150 |
| 114 | Supply of Double key lock for relay room.(To Be Inspected by CONSIGNEE) | Numbers | 10.00 | 1,233 | 12,330 |
| 115 | Printing, Binding & supply of registers with latest proforma given by in-charge officer each register of 100 pages..(To Be Inspected by CONSIGNEE)(ITEM UNIT IS PER REGISTER) | Numbers | 250.00 | 358 | 89,500 |
| 116 | Supply of Electrostatic Rubber Matting of thickness 2mm as per IS-15652/2006 with suitable adhesive material.(To Be Inspected by CONSIGNEE) | Sqm | 200.00 | 2,390 | 4,78,000 |
| 117 | Supply of key chains with ring and plastic name plate of dimensions 60mm x 20mm x 3mm. The plastic name plate shall be engraved with station name on one side and key particulars on the other as specified by the site in-charge..(To Be Inspected by CONSIGNEE) | Numbers | 100.00 | 34 | 3,400 |
| 118 | Supply of LED holders with LEDs of size 5 mm with 0.5 Watt resistance. To be supplied as per requirement of site in-charge.(To Be Inspected by CONSIGNEE) | Numbers | 300.00 | 18 | 5,400 |
| 119 | Supply o f Corium Z 105 Battery cleaner and terminal conditioner of 500ml tin can.(To Be Inspected by CONSIGNEE) | Numbers | 10.00 | 5,274 | 52,740 |
| 120 | Desk type 2 wire, 12 way DTMF selective calling group telephone (Selective Calling / Group Telephone) complete as per specification IRS: TC 80-2000 Amd. 1 or latest with suitable power supply unit.(To Be Inspected by RITES) | Set | 14.00 | 6,282 | 87,948 |
| 121 | Supply of Four Wire D T M F way station equipment' to R DSO spec. No. TC - 60 / 2007- Amdt - 1 (or latest ) with telephone t o R D S O spec. No. TC - 38 / 97 (or latest).(To Be Inspected by RDSO) | Numbers | 4.00 | 5,617 | 22,468 |
| 122 | Supply of Power Supply Unit for telecom installations of 2A output capacity as per specification IRS: TC 72-97 Amd. I or latest with 12V / 7AH maintenance free battery.(To Be Inspected by RDSO) | Numbers | 2.00 | 4,265 | 8,530 |
| 123 | Supply of emergency socket box of FRP material as per specification RDSO/SPN/TC/44/2002 Ver. 3.0 with Amd. 1, 2, 3, Corrigendum I or latest, DRG. TCDO/RE/001/2002 Ver. 0.1 or latest, TCDO/RE/001/2002/1 with socket six pin flat. (To Be Inspected by RITES) | Set | 10.00 | 5,195 | 51,950 |
| 124 | Supply of 10 pair Terminal block of Wago Make or Similar (with lever type disconnection & reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor. (To Be Inspected by consignee) | Numbers | 10.00 | 1,817 | 18,170 |
| 125 | Supply of Push button corded auto telephone with Caller ID facility of a) Volume control, b )Incoming & outgoing call memory, c) music on hold, d) selectable ringer melodies. Make : BEETEL, Model : M77/ BPL/ PANASONIC or similar (To Be Inspected by CONSIGNEE) | Numbers | 4.00 | 1,495 | 5,980 |
| 126 | Supply of Core Alignment Fusion Splicing Machine of model Fujikura 88S+ or Similar TEC Spec TEC/GR!OSM-01/04/SEP-12 or latest.(To Be Inspected by CONSIGNEE) | Numbers | 1.00 | 2,59,600 | 2,59,600 |
| 127 | Supply of Maintenance Free Batteries of 12V/100AH AMARAJA/ EXIDE/ Panasonic or equivalent brand. (To Be Inspected by CONSIGNEE) | Numbers | 4.00 | 11,167 | 44,668 |
| Schedule total | ₹4,99,73,855.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
RAMGUNDAM_IPU_1272D_Final1.pdf
ATTACHMENT
RFCISDG.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_12_compressed.pdf correction slip 12
ATTACHMENT
MasterTenderDocumentT.NO.619.pdf
ATTACHMENT
Technical_SpecificationsT.NO.619.pdf
ATTACHMENT
SpecialConditionsofContractT.NO.619.pdf
ATTACHMENT
GCC_April-2022__1.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
MAKEININDIA2.pdf
ATTACHMENT
ListofAnnexures.pdf
ATTACHMENT
MAKEININDIA1_compressed1.pdf
ATTACHMENT
Tele_Cir_9-2023.pdf
ATTACHMENT
corrslip1to11compressed.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_12_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].