Supply and Installation of furniture for New Judicial Courts Complex Shahbad (M) in Disrict Kurukshetra.

Amount

Supplying and placing in position Multipurpose table of the following specifications. Table size shall be 3600 Width mm x 900 Depth mm x 740 Height mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube . Top 25 mm thick PLB + 2 mm thick PVC edge beading + Understructure C - Frames 1.6 mm thick + Legs dia. 38.1 x 1.6 mm thick MS ERW. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5-114cm. Seat height shall be 44.5cm - 54.5cm. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. The product must be having BIFMA certification.Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Supplying and placing in position Table of the following specifications. Table size shall be 900 Width mm x 900 Depth mm x 750 Height mm . The top shall be 18 mm thick pre- laminated board (PLB) . All worksurface edges shall be duly sealed with 2 mm thick beading. The Understructure shall be having tubular frame made of MS ERW 25.4 x 1.2 and made from 0.9 mm thick powder coated 50 microns CRCA MS . The side plus fronts plus back panels shall be pre - laminated twin board of 18 mm thick and front support tube shall be MS ERW of 32 x 19 x 1.6 mm. The storage parts shall be made up of 0.5 to 0.6 mm CRCA MS. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44cm W x 46cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(90.5-19.8cm). The seat height shall be (44.5-53.8cm). Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Table size of 15' length and 3' width with 4 legs and sunmica top. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44cm W x 46cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The powder coated tubular frame is cantilever type and made of dida 2.54cm x 0.3cm thik MS ERW tube. Shoes are made of glass filled POly amide and fixed to thw tubular frame. The overall dimensions of the chair shall be 48.5x 58.9cm x93.5cm. The seat height shall be 47.5cm. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Side Racks Overall Dimensions shall be 900mm(W)x450mm(D)x711mm(H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . It shall have 1 no. of adjustable full shelf . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . A4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm . Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Steel Almirah overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Almirah should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Benches for litigants 1)cross beam: it should be made up of black powder coated rectangular m.s.erw tube having 8.0 ± 0.03 cm x 4.0 ± 0.03 cm x 0.2 ± 0.014 cm size. 2)leg and armrest: it should be chrome plated made of cold rolled steel with 0.12 ± 0.013 cm thinkness. 3)seat/back shell: it should be powder-coated perforated shell made from cold rolled m.s. sheet (din1623 partl st-12 grade) 0.14 ± 0.013 cm thickness.the side bar should be made of chrome plated solid steel 3.0 ± 0.03 cm x 1.2 ± 0.3 cm with fluting and plastic inserts. the shell should be assembled on the cross beam with help of m8 bolts (per seat - 8 nos. seat to bracket and 4nos. bracket to cross beam). the seat & back cushion should be made up of pu foam upholstered with leather cloth or fabric with plywood. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Providing and Placing Main table. Overall size of table 2100 W x 2250 D x 750 H. The table shall be made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure shall be made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal shall be made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Drawer fronts shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers shall have a soft closing & anti slam mechanism. Handles shall be provided for ease of opening. Pedestals shall be provided with lock for security. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Office Chair revolving cushioned seat The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44cm W x 46cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The powder coated tubular frame is cantilever type and made of dida 2.54cm x 0.3cm thik MS ERW tube. Shoes are made of glass filled POly amide and fixed to thw tubular frame. The overall dimensions of the chair shall be 48.5x 58.9cm x93.5cm. The seat height shall be 47.5cm. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Steel Almirah Wardrobe Product Size :1018mm(W) x 537mm(D) x 1980mm(H).Construction & Material:Welded construction. 0.8mm thk CRCA for doors, back, full shelf & locker shelf . 0.63mm thk CRCA half shelf . 0.9mm thk CRCA for all other components.Locking & handle: Mazak handle, Three way locking mechanism with shooting bolt. Locker: Fixed half locker with secret compartment. Hinged Door for locker. 2 way locking mechanism for locker door . Shelving: Height wise adjustable shelf mounting .1Nos. of adjustable full Shelf, 1Nos. of fixed full shelf, 1nos of adjustable half shelf Hanging Rod & Tie bar. 1.0mm thk ERW tube for hanging rod. 1.0mm thk aluminum for tie bar. Leveler: M10 screw type leveler with hex plastic base Finish: Epoxy Powder coated to the thickness of 50 microns (+-10). Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Foot Rest Dimensions- 445W X 295D Having AIOTA Certificate. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Side Racks Overall Dimensions shall be 900mm(W)x450mm(D)x711mm(H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . It shall have 1 no. of adjustable full shelf . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . A4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Side Table 2' * 2' Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. Black tinted toughened glass, UV glued with bushes, Welded understructure. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Office Chairs The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armtop is made up of PU molded over plastic inner. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. The product should have Green Guard and AIOTA certification. Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99.0cm. Seat height -49.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Back: (W) 46.5 cm x (H)60.0 Cm, Seat : (W)51.0 cm x (D) 49.0 cm Overall Dimensions of Chair Seat Height - 49.0cm. Height - 99.0cm. Width & Depth of Chair as measured from pedestal - Width-70.5 cm and Depth-70.5 cm Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge.

Centre Table sunmica top Dimensions- 118W X 60D X 45H. Note:- Items should be provided of above specifications/higher specifications as approved by Engineer-in-Charge. Note: Material of Made Godrej, Methadox, Wipro, Space wood or superior than the prescribed as desired by the Engineer-in-Charge.