Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹19.3 L
Closing Date
2 Aug 2025, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Krishna Reddy G T
Establishing 2X20MVA, 66/11kV sub-station at Bhogasandra and Construction of 66 kV LILO line on DC towers from existing 66kV Hosakere-Hagalavadi SC line to proposed 66/11 kV sub-station at Bhogasandra for a distance of 6.87kms using Coyote conductor and Construction of One No. of 66kV Terminal Bay at existing 66/11kV Hosakere Sub-station for terminating 66kV line to proposed 66/11kV Bhogasandra Sub-station in Gubbi Taluk & Tumakuru district on Partial Turnkey Basis including Supply of all matching Materials/Equipments (Excluding Supply of 11kV Switchgear) and Erection (Including Civil Works) of all Materials/ Equipment, Testing and Commissioning.
KPTCL/2025-26/SS/WORK_INDENT2418
KPTCL/2025-26/SS/WORK_INDENT2418
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for Clause No. 3.2(b)(i) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer.
Documentary proof for Clause No. 3.2(b)(ii) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Cl.No.3.2(d)(A)(3) Qualifying Requirements for Power Transformer manufacturer as a Bidder: Shall upload Necessary documentary evidence for Cl.No 3(b) &(c) of Cl.No.3.2(d)(A) issued from Utilities such as P.O. copies, LOA/DWA, Performance Certificates issued by the end users (Indian Government Power Utilities) not below the rank of Executive/Divisional Engineer, should be uploaded along with the offer.
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder & Consortium member(In case of Consortium)
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent or verified and certified by Chartered Accountant/Cost Auditor as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information by the lead Bidder and Consortium member(In case of Consortium).
The Tenderer shall upload Bankers Certificate of lead Bidder & Consortium Partner (if applicable) duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities)
self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Lead Bidder & Consortium partner(in case of Consortium) stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Certificate from Chartered Accountants for split details of financial Turnover and GST in the prescribed format (Annexure-XX) of Lead Bidder & Consortium partner (In case of Consortium).
Type test reports of Power transformer as per Clause No. (3)(d) & (e) of Cl.No.3.2(d)(A).
Dynamic Short Circuit test reports as per Clause No. (3)(f) of Cl.No.3.2(d)(A).
Undertaking-1 wrt to Type test reports & Dynamic Short Circuit test reports if Power transformer manufacturer participates as a Bidder.
Self-declarations of Lead Bidder & Consortium partner (In case of Consortium) in respect of Litigation, dis-qualification due to non-performance, Risk & cost clause and Restriction on border sharing as specified in Annexure- XVI& Annexure-XVII as per Clause No.2.4of ITT
Consortium Agreement
Power of Attorney in favour of all the persons signing the documents, Power of Attorney for Consortium, combined power of attorney signed by the signatories of all the members of consortium as an evidence of authorization for nominating leader (Prime Bidder) of consortium.
Valid Super Grade Electrical Contractors License of both Lead Bidder & Consortium partner (in case of Consortium) issued by the Govt. of Karnataka
Certificate of Incorporation of the Individual/Consortium or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
The bidder and Consortium Partner(in case of Consortium) should have valid GST registration with GSTIN number PAN Card and ISO Certificates.Note The successful Bidder and his consortium partner who have GST registration in other States should have GST registration in the State of Karnataka mandatorily at the time of execution of the Contract Agreement.
No Deviation Certificate
Letter of Undertaking as in Annexure
The Qualification and experience of key Personnel proposed for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender and Procurement - application for Vendor registration etc.
undertaking to source the supply of equipment/material from Vendors who meet the eligibility clauses regarding restriction on procurement from a country which shares land border with India as specified in Annexure- XVII.
Details of Works on hand and Ongoing contractual commitments
Upload all relevant documents as per Section-3 Qualifying information, NIT, Terms & conditions as stipulated in the Tender Document.
Copies of original documents defining the Constitution or Legal Status, place of Registration and Principal place of Business of the Bidder (Lead Bidder & Consortium Partner) , written Power of Attorney to the Signatory of the Bid to commit the Bidder (Lead Bidder & Consortium Partner) to the Contract along with the resolution passed in this regard by the Board of Directors all the Partners of the Firm.
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Please note that the Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only.
Cl.No.3.2(d)(A)(3) Qualifying Requirements for Power Transformer manufacturer as a Bidder: Necessary documentary evidence for Cl.No.3.2(d)(A)(3) (a) wrt to registration of manufacturing company shall be uploaded.
₹7,500
₹19.3 L
17 Jul 2025
17 Jul 2025
4 Aug 2025
18 Jul 2025
18 Jul 2025
Station Supply Portion
Power Transformer:
20MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first fill...
Nitrogen Injection fire extinguishing system-Supply, Erection & Commissioning of Nitrogen Injection Fire Extinguishing System for Power Transformer below 100 MVA, as per Technical Specifications.
CIRCUIT BREAKER : SF-6 Gas circuit breakers with Semi Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting structures arrangements with rigid, bi-metallic terminal conn...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specifications with solid core cylindrical post insulators
I) 66 kV, 1250 A, 40 kA class d...
2)Upright mounting type without Earth switch.(LPH 4600mm)
3)Upright mounting type without earth switch. (Live point height 6350mm)
Note:Terminal connectors for Isolators shall be as follows :
Rigid type suitable for Drake ACSR- 27 Nos
Flexible type suitable...
II) 11 kV Isolators
1) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank
2)11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.
CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications
1) 66 kV class, 40 KA,...
2) 66 kV class, 40 KA, CT of ratio 400-200/ 1-1-1A for Lines
Core - 1 : Vk-1600 V at 400A, 800 V at 200A, Rct 4 ohm at 400/1A, Rct 2 ohm at 200/1A Accuracy class PS-Dist/Dif
Core- 2 : 10 VA, Accuracy...
3) 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos. of 75mmx8mm Copper ...
VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.
66 kV class 66kV/rt3/110V/rt3/ 110V/rt3/...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR as per technical specifications
1) 60 kV, 10 KA, SM type-for Transformer
3) 9 kV, 10KA station class with connector and clamp
Capacitor Bank: Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable n...
Control and Relay Panel Complete -SCADA Compatible per specifications:
Simplex type control and relay panels complete as per specifications.
1) For Power Transformer 66/11 kV
2)For 66 kV Transmission line
1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components.
2) The Accuracy class of metering c...
Total Weight of Station structures & Mounting Structures (excluding Bolts & nuts)
Total Weight of Bolts & Nuts of Station structures & Mounting Structures
11) 11 kV ODS and take off structure :
Supply of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete se...
BUS BAR FORMATION :
1) Drake ACSR-66kV Side
Rigid bus with taps & clamps:
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) inlcuding fixing of clamp, connector jumper ,corona ring etc., complete & as per technical...
b) 63mm size connecting isolator to vertical tap
ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.
iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 110kV side
iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66kV
A) Post insulators- Cylindrical solid core Insualtors as per speciifcations.
1) 66KV Class, 1Unit/stack.
B) 11kV,90 KN,Disc Insulators:66kV side- Single Suspension (6 strings) & Single Tension strings (03 strings) of 9 units each - (09 Strings)
C)HARDWARES & CLAMPS :
i) C Type wedge connector suitable for Drake - Coyote (Line)
ii) C Type wedge connector suitable for Drake - Drake (Bus)
iii) Post insulator clamp suitable for Drake ACSR and 66kV Solid core insulator.
iv)Single Tension clamps and hardware suitable for Drake ACSR ( 66kV side )
v)Single Suspension clamps and hardware suitable for Drake ACSR ( 66kV side )
Auxiliary Transformer:
Supply of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) wi...
Supply of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector mete...
LTAC Distribution panel ( Indoor), 415V, comprising of Volt meter, Ammeter & 1 I/C MCCB 200A + 2 nos 3 phase, 63A O/G SFU with HRC fuse + 2 nos 3 phase 32A O/G SFU with HRC fuse + 6 nos 3 phase 16A SF...
AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type
LT Power armoured UG cable as per specification:
1)1.1kV grade PVC Insulated armoured Alumimium cable with glands/lugs/ferrules 4c x 95 Sq.mm
2) 1.1kV grade PVC Insulated armoured Copper cables with glands/lugs/ferrule 4c x 25 Sq.mm
3) 1.1kV grade PVC Insulated armoured Copper cables with glands/lugs/ferrules 4c x 10 Sq.mm
STATION BATTERY & BATTERY CHARGER :
110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications
Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...
LT DC Distribution panel (Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. compl...
1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications
1) 19c x 2.5 Sq.mm
2) 10C x 2.5 Sq.mm
3) 4C x 6 Sq.mm
4) 4C x 2.5 Sq.mm
5) 2C x 6 Sq.mm (for station-1800 mtr & Yard lightening-1110mtr)
6) 2C x 2.5 Sq.mm
11KV U.G. Cable with the required cable terminations at both ends as per specifications.
a.One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch ...
b.11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV transformers to 11KV Switchgear.
c.11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.
d.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )
e.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)
f.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )
g.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)
h.Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )
i.Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)
FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:
1.Foam type extinguisher (Mechanical) 50 Ltr. capacity
2.Foam type extinguisher (Mechanical) 9 Ltr. capacity
3.Water type (gas pressure type) 9 Ltr. capacity
4.Carbon di-oxide type 4.5 kg Capacity
5.Sand type G.I Buckets 15 Ltr. Capacity
6.Steel stands for above to have 4 buckets to each stand.
Maintenance Tools and Plant:
1. Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
2. Telescopic ladder Aluminium 6 Mtr. Height
3. Ring spanner set (12 Nos per set)
4. Tube spanner set (12 Nos per set)
5. Pipe wrench 24 inch
6. Pipe wrench 18 inch.
7. Hydraulic crimping tools up to 1000 Sq.mm
8. Rubber hand gloves (15 kV tested)
9. Rechargeable 5W LED hand torch
10. Insulated cutting plier 12 inch size
11. Insulated cutting plier 8 inch size
12. Line live tester AC/DC 500 V
13. Screw driver 18"
14. Screw driver 12"
15. Hammer 8 lbs
16. Hammer 2 lbs
17. Chain pulley block 5 ton capacity
18. Hydraulic jack 5T capacity
19. Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height
21. Box spanners (12 Nos per set)
22. Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.
23. Insulation megger 2.5 - 5 kV
24. Insulation megger 500 V
25. SF-6 gas leak Detector
26. Multimeter electromechanical
27. Multimeter Electronic
29. DC Voltmeter range -5V to + 5V
30. Hydrometer syringe suitable for vent holes
31. Specific gravity correction chart
32. Thermometer with wall mounting holder
33. Rubber appron
35. Protective goggle
36. Acid resisting jars (4 pint capacity)
37. Rubber shoes knee height
38. Glass funnel
39. Grounding sticks extendable upto 18 ft
40. Wall mounting type holder for hydrometer
MISCELLANOUS ITEMS
1.Rubber mats 2000 mm x 1000 mm x 12 mm size
2.First aid box.
3.Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.
4.Water filter / Water purifier : Wall mounting type (Aqua-guard type).
5.Sub-station name board duly painted.
6.Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.
7.Brass cupboard locks 6 Levers (reputed make of approved quality) 75mm size
8.Danger Board (Prohibited) with support structure including fixing in front of the gate
9.Equipment name plates and earthing name plates including fixing at outdoor yard
Furniture for Control Room Staff and maintenance staff
1.Steel Almirahs 6 1/2 feet
2.Steel Almirahs 6 1/2 feet with glass panel doors
3.Officers tables
4.Steel Slotted angle rack (big Size)
5.Steel Slotted angle rack (small Size)
6.Steel dustbins
7.Executive revolving chairs
8.S Type Arm Chairs
9.Steel folding Chairs
Equipments for establishing SCADA Communication as per Technical Specification :
1) Remote Terminal Unit (RTU)
2) Data Concentrator Unit (DCU)
3) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set
4)For Integration of New Bay to existing SCADA System
i)Multi Funtional Transducer (MFT)
ii)8 Channel 220/110 V Opto Coupler
5) Cables -Supplying
a.Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core
b.Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core
c.Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core
d.Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core
e.Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.
f.Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.
Note : Satellite Communication required will be arranged by SLDC.
STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder):
1) Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transp...
3) Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...
Station Erection Portion
Power Transformer:
20MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first fill...
CIRCUIT BREAKER : SF-6 Gas circuit breakers with Semi Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting structures arrangements with rigid, bi-metallic terminal conn...
ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specifications with solid core cylindrical post insulators
I) 66 kV, 1250 A, 40 kA class d...
II) 11 kV Isolators
1) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank-2 sets
2)11 kV isolator, single break 400...
CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications
1) 66 kV class, 40 KA,...
3) 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos. of 75mmx8mm Copper ...
VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.
66 kV class 66kV/RT3/110V/RT3/ 110V/RT3/...
SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR as per technical specifications
1) 60 kV, 10 KA, SM type-for Over head lines-6 N...
3) 9 kV, 10KA station class with connector and clamp
Control and Relay Panel Complete -SCADA Compatible per specifications:
Simplex type control and relay panels complete as per specifications.
1) For Power Transformer 66/11 kV-2Nos.
2)For 66 kV Transm...
Total Weight of Station structures & Mounting Structures (Including Bolts & nuts)
11) 11 kV ODS and take off structure :
Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete ...
BUS BAR FORMATION :
Main bus/cross bus (all the three phases in a segment) using with Single Drake Conductor with fixing of insulator spacers, levelling of string conductors to the required height ab...
Rigid bus with taps & clamps:
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) inlcuding fixing of clamp, connector jumper ,corona ring etc., complete & as per technical...
Post insulators- Cylindrical solid core Insualtors as per speciifcations.
1) 66KV Class, 1Unit/stack.
Auxiliary Transformer:
Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) ...
Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector me...
LTAC Distribution panel ( Indoor), 415V, comprising of Volt meter, Ammeter & 1 I/C MCCB 200A + 2 nos 3 phase, 63A O/G SFU with HRC fuse + 2 nos 3 phase 32A O/G SFU with HRC fuse + 6 nos 3 phase 16A SF...
AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type
LT Power armoured UG cable as per specification:
1)1.1kV grade PVC Insulated armoured Alumimium cable with glands/lugs/ferrules 4c x 95 Sq.mm-200m
2) 1.1kV grade PVC Insulated armoured Copper cab...
STATION BATTERY & BATTERY CHARGER :
110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications
Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...
LT DC Distribution panel (Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. compl...
1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications
1) 19c x 2.5 Sq.mm
2) 10C x 2.5 Sq.mm
3) 4C x 6 Sq.mm
4) 4C x 2.5 Sq.mm
11kV Switchgear:
A) 11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+4CB+1AP (Remote Announciation cum Control panel) with...
11KV U.G. Cable with the required cable terminations at both ends as per specifications.
a.One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch ...
d.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable Indoor type & Out door type
f.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable Indoor type & Out door type
h.Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable Indo...
Equipments for establishing SCADA Communication as per Technical Specification :
1) Remote Terminal Unit (RTU)
2) Data Concentrator Unit (DCU)
3) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set
4) Integration of RTU, DCU and UPS with field equipments
5)For Integration of New Bay to existing SCADA System
i)Multi Funtional Transducer (MFT)
ii)8 Channel 220/110 V Opto Coupler
6) Cables -Laying
a.Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core
b.Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core
c.Signal Cables-armoured Copper Core with c/s ...
Earth Mat formation :
1) Supplying and laying of MS flat 75x12mm sizes, welding and applying ACB paint to welded portion and covering as per the drawing / standard specification and consolidatio...
2) Grounding of equipments with 75 x 12mm GI flats and connecting equipments to earth mat or ground pit each point of earthing with all formation of works like ...
3)Grounding of equipments with 50 x 6mm GI flats and connecting equipments to earth mat or ground pit each point of earthing with all formation of works like ...
4) Providing 40 mm Dia MS round rod 1.075 Mtrs long Earth mat spike including, benting, top 50 mm overlap, flatening and making spike edge at one end driving into the earth ...
5) Grounding of Equipments by supplying and providing CI pipe of 100 mm ID, 13mm thickness, 2.75 mtrs long with 2 part clamps out of GI flat 50x6 mm continously welded al...
6) Supplying and providing 450mm dia and 450mm height 1.5to 2" thickness RCC Hume pipe collar (non pressure type) for earth pits including Transportion, all lea...
Releasing and Re-erection of equipment:
i)Releasing and Re-erection of equipment-66kV PT
ii)Releasing and Re-erection of equipment-66kV Isolator
Dismantling Portion:
Note : 1) The Released materials shall be transported to the nearest KPTCL Projects Division Stores.
2)The rates quoted for releasing/dismantling shall also include the charges f...
ii) Releasing of mounting structure for 66kV Isolator (0.752 t) -1 No
Mandatory Spares Supply Portion
Circuit Breaker (CB)
Closing coil with resistor (For one Complete Circuit Breaker)
a) for 72.5KV CB
Tripping coil with resistor (For one Complete Circuit Breaker)
a) for 72.5KV CB
Terminal Pad (For one Complete Circuit Breaker)
a) for 72.5KV CB
Terminal Connector (For one Complete Circuit Breaker)
a) for 72.5KV CB
SF6 Gas (40% of total gas Qty. of 66/11 kV Sub-station
Copper Contract fingers male & female (For one Complete Isolator)
a) for 72.5KV Class
Terminal Connector (For one Complete Isolator)
a) for 72.5KV Class
Terminal Pad (For one Complete Isolator)
a) for 72.5KV Class
Line Supply Portion
Fabrication, Prototype Inspection and Supply of galvanised Transmission Line Towers as per Technical Specifications.
Total weight of the Towers -High Tensile Steel (HT).
Note - 1) Rate to be quot...
Fabrication, Prototype Inspection and Supply of galvanised Transmission Line Towers as per Technical Specifications.
Total weight of the Towers -Mild Tensile Steel (MS).
Note - 1) Rate to be quot...
Supply of Bolts, Nuts and washers etc., (galvanised) required for Transmission Line Towers as per Technical Specifications.
Note - 1) Rate to be quoted on per tonne(t) basis.
2)For detailed quan...
Tower accessories :
1) Number Plates
2) Danger Boards
3) Circuit plate
4) Phase plate (Set of 3 No.)
5) Earth bond 300 mm long
6) Earth bond 450 mm long
7) Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation c...
Conductor & Earth wire :
1)Drake ACSR Conductor with 1.5% sag
2) Coyote ACSR Conductor with 1.5% sag
(40mts considered for Hagalwadi S/s Bay Portion & 100mtrs for Station Portion at Bhogsandra)
3) 7/3.15 mm GI Ground wire with 1.5% sag
I) Insulators Strings suitable for DRAKE ACSR Conductor as per technical specifications.
NOTE: All the Insulator strings and hardware fittings quoted by the bidder shall be of the same type i.e. all t...
II) Insulators Strings suitable for COYOTE ACSR Conductor as per technical specifications.
A. Tension insulator strings consisting of any one of the following:
a. Tension Insulator string consisting ...
B. Suspension insulator strings consisting of any one of the following:
a.Suspension Insulator string consisting of 1X4nos. of 66kV, 90kN Disc insulators.
C. Insulator strings consisting of any one of the following for Pilot Insulator:
a. Insulator string consisting of 1X4nos. of 66kV, 90kN Disc insulators for Pilot Insulator
II.Hardware and clamps for Coyote ACSR conductor with Arcing horns.
1)Single Tension Clamp with hardware and arcing horn suitable for 1x5nos. of 66kV, 90kN insulator to suit Coyote ACSR.
2) Single Suspension Clamp with hardware and arcing horn suitable for 1x4nos. of 66kV, 90kN insulator to suit Coyote ACSR.
3) Double Suspension Clamp with hardware and arcing horn suitable for 2x4nos. of 66kV, 90kN insulator to suit Coyote ACSR.
4) Single Suspension Clamp for Pilot Insulator with hardware and arcing horn suitable for 1x4nos. of 66kV, 90kN insulator to suit Coyote ACSR.
5) Double Tension Clamp with hardware and arcing horn suitable for 2x16nos. of 220kV, 120kN insulator to suit Drake ACSR.
Accessories for Coyote ACSR Conductor :
1) M S C Joints suitable for Coyote ACSR
2) Pre formed armour rods suitable for Coyote ACSR
3) Repair sleeves suitable for Coyote ACSR
4) P G Clamps suitable for Coyote ACSR
5) Vibration dampers for Coyote
ACCESSORIES FOR DRAKE CONDUCTOR:
1) MSC Joints suitable for Drake ACSR
2) Repair sleeves suitable for Drake ACSR
3) P G Clamps suitable for Drake-Coyote ACSR
4) Vibration dampers for Drake ACSR
Hardware for Earthwire :
1) M S C Joints suitable for Ground conductor
2) Repair sleeves
4) Single Tension clamps (bolted type) suitable for Ground conductor
5) Single Suspension clamps (bolted type) suitable for Ground conductor
Line Erection Portion
Check Survey and Towers Spotting.
Check survey using their own equipment for 66kV Plain terrain.
1.The survey covers the scope as defined in Technical Specifications & As per volume -VI of Com...
Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.
Paving out conductor from anchor to anchor normally spaced at 5...
2. Coyote ACSR Conductor in Plain Terrian
3. 7/3.15 mm GI Ground wire Plain Terrian
Erection of Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.
1.The Bidders are required to quote the rates ...
Supplying and fixing AC devices:
i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer s...
ii) Supplying and fixing Barbed wire as per specification
Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...
Dismantling Portion:
Note : 1) The Released materials shall be transported to the nearest KPTCL Projects Division Stores.
2)The rates quoted for releasing/dismantling shall also include the charges f...
ii) Releasing & Restringing of ground wire from existing Tower of 66KV Hosakere-Hagalawadi SC Line to Proposed New 110KV DD+3 NBT Tower at Hosakere S/S
Station Civil Portion
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corner...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...
30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
ix) Control Panel BOARD-A:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...
POWER CAPACITOR:
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Erection of panel board & meter board Unit :
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...
Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole
Supplyingand drawingPVCflexible onepair telephoneunarmoured tinned copper cable. 2Pair
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.
Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...
Supplying of recess mounting non integrated type LED down light 36W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Line Civil Portion
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Section 11a Techno-Commercial sheet Bhogasandra WI2418.xlsx
Tender Document • 1.30 MB
NIT Bhogsandra WI229184.pdf
Tender Document • 1.21 MB
Section-7 Technical Specifications.zip
Tender Document • 19.28 MB
Proceedings-WI 2416 -2417- 2418.pdf
Others - Pre Bid Meeting Proceedings • 1.71 MB
Circulars and Guidelines.zip
Tender Document • 3.00 MB
Section-8 Drawings.zip
Tender Document • 16.14 MB
Tender Doc of 66kV Bhogasandra WI2418.docx
Tender Document • 0.57 MB
Advisory note to bidders.pdf
Tender Document • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .