Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.4 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹22.8 L+₹4.3 L (23.6%)Rejected-Finance NO 6 NJ BUILDING GANGAMMA TEMPLE ROAD JALAHALLI POST BANGALORE 560 013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | L2 | Rejected-Finance Not L1 |
Tender Value
Refer Docs
EMD Value
₹35,000
Closing Date
13 Feb 2021, 6:00 pmClosed
GARRISON ENGINEER CENTRAL BANGALORE
MILITARY ENGINEER SERVICES GARRISON ENGINEER CENTRAL AGRAM POST BANGALORE 560007
PROVISION OF 01 X BORE WELL WITH ALLIED WORKS AND SPL REPAIR REPLACEMENT OF BER ELECTRICAL ITEMS AT CERTAIN UNITS OF ASC CENTRE AND COLLEGE UNDER GE CENTRAL BANGALORE
2020_MES_345891_6
8919
Open Tender
Civil Works
Item Rate
180 days
BANGALORE
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GARRISON ENGINEER CENTRAL BANGALORE
₹35,000
Yes
9 Mar 2021
19 Jan 2021
15 Feb 2021
19 Jan 2021
13 Feb 2021
30 Jan 2021
19 Jan 2021 - 29 Jan 2021
Amount
M&L for drilling of borehole through any kind of soil, boulders, rocks etc. for a bore size 150 mm dia as required at site for a depth upto 35 mtrs from ground level including disposal of spoil from the site of work complete all as specified & as directed.
All as per Item Sl No 01 But drilling bore size 150 mm (6 1/2) here in above but for depth exceeding 35 mtrs & upto 70 mtrs below ground level complete.
Electro logging of bore for precise delineation of granular zones & also the quality of ground water including report interpretation complete all as specified & as directed. NOTE:- Electric logging shall be carried out by any approved Govt Agency.
Supplying and assembling including jointing, lowering & fixing in position ERW casing pipe fine cut of internal dia 150 mm bore of thickness 5.4 mm confirming to IS 4270-2001 (ISI marked) including jointing of pipe by necessary electric arc welding both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purpose complete all as specified & as directed. MAKE : TATA/JINDAL/PRAKASH
Supply and fixing well cap suitable for 150 mm bore housing pipe made out of 6 mm thick steel plate complete all as specified and directed. NOTE : After completion of the work well cap will be used to keep the bore well closed until the submersible pumping set is installed.
M&L for development of tube well with air compressor of suitable capacity till sand/mud free water of potable quality is obtained (Compressor with accessories & tube etc. shall be arranged by the contractor) complete all as specified & as directed.
Development of tube well by over pumping 25% using suitable size diesel engine driven turbine pump after completion of item above, including yield testing for tube well as per IS requirements. NOTE :- Yield test of bore well shall be carried out in the presence of rep of Accepting Officer.
Supply only strata sample box with glass cover 3mm thick having internal dimension 1000x600x100mm made out of 20mm thick wrought Ist class hard wood shisham with hinges, hasp and staple including polishing complete with samples at various depth evenly 2 mtr interval met in boring including strata chart in duplicate all as directed and specified.
M&L for sanitary sealing of tube well with PCC (1:2:4) type B1 of suitable size using 20 mm graded aggregate complete all as specified and as directed
Collection of water from bore well, testing at/from approved Govt lab for potability by doing chemical and bacteriological analysis as per norms of WHO and submission of test reports to the entire satisfaction of Engineer-in-Charge.
Supply, lowering, jointing & testing GI heavy grade column pipe 50 mm bore both ends threaded, ISI Marked with heavy duty socket . MAKE : TATA/JINDAL/PRAKASH
S&F flat submersible cable 3 core multi stranded copper conductor PVC insulated, water proof, ISI marked of size 6 sqmm for connecting from starter to bore well submersible pump sets complete all as specified and as directed. MAKE : FINOLEX/HAVELLS/RR KABEL
Supply and fixing steel rope flexible 10 mm dia with GI clamps, nuts, bolts, washer etc for fixing of submersible pump set complete all as specified & as directed.
S&F mild steel clamp suitable for 50 mm dia column pipe made out of 12 mm thick MS plate fabricated to shape, including drilling holes, nuts, bolts, washers etc complete all as specified & as directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 8 mm dia round bar, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mm bore light grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete.
Supply, jointing, testing and laying in trenches / floor /wall etc pipes galvanised iron "Medium grade" ISI marked with all running fittings of size 50 mm bore complete all as specified and as directed. MAKE : JINDAL/TATA/PRAKASH
Supply, install, testing & commissioning of gun metal globe or gate valve 50 mm dia, ISI marked with iron wheel head, screwed both ends for iron pipe including all necessary accessories complete all as specified and as directed. MAKE : KIRLOSKAR/LEADER/ZOLOTO.
All as per item No 18 here-in-before but 40 mm bore complete. MAKE : KIRLOSKAR/LEADER/ ZOLOTO.
All as per item No 18 here-in-before but 25 mm bore complete. MAKE : KIRLOSKAR/LEADER/ ZOLOTO.
Supply, install, testing and commissioning of multi stage submersible pump set (Open well type ) with bronze impeller, directly coupled with motor, suitable for minimum total head 306 mtrs and discharge min 50 LPM yeild operated on AC 3 phase, voltage range 300V-440V, 50 Hz. The motor casing shall be of stainless steel, pump shaft / motor shaft shall be of stainless steel, pump bowls shall be of high graded cast iron complete all as specified and directed. The pump and motor shall comply to all the requirements of relevant IS. Make: Kirloskar / KSB/CG/CALAMA.
Provision of trenchless bore using mechanical numatic drilling equipment for passing electric cables through HDPE pipe of 80mm dia under the existing bituminous/WBM road/PCC hard standings, depth range not less than 1.0 mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with its existing specifications all as specified and directed by engr-in-charge at site. Note : 1. Quoted rates deems to be inclusing of necessary earth work, transportation charges of Drilling machine, and cost of HDPE pipe and passing pipe through bore complete. 2. Any damage to MES assets caused during trenchless bore shall be recitfied by the contractor at his own cost.
Supply and laying, jointing & testing cable XLPE insulated, armoured and PVC sheathed LT 1100 volts grade and aluminum conductor confirming to IS 1554 laid in trenches/through pipe/floor/fixed wall etc complete all as specified and directed for size of cables 25 Sqmm 3½ core. Note: Excavation, earth work, sand cushioning, cable cover, returning/filling will be measured & paid seperately.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of DI/GI pipes of any sizes in soft loose soil complete all as specified & as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified & as directed.
Removing of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & as directed.
M & L for Sand cushioning and covering with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment whose thickness shall not be less than 18cm)
Supply and lay common burnt(Kiln burnt) locally available best quality brick laid at right angle on the cable complete in trenches for cable protection complete all as directed by Engr-in-charge.
S & F ball brass valves, high pressure, with copper float & flynut complete, screwed for iron pipe or brass ferrule of size 25 mm dia incl testing complete all per IS - 1703:2000. Make: KIRLOSKAR/LEADER/ ZOLOTO/NETHA
S & F ball brass valves, high pressure, with copper float & flynut complete, screwed for iron pipe or brass ferrule of size 40 mm dia incl testing complete all per IS - 1703:2000. Make: KIRLOSKAR/LEADER/ ZOLOTO/NETHA
S & F ball brass valves, high pressure, with copper float & flynut complete, screwed for iron pipe or brass ferrule of size 50 mm dia incl testing complete all per IS - 1703:2000. Make: KIRLOSKAR/LEADER/ ZOLOTO/NETHA
Supply only PH test kit with coloured sample covered under BTB (range 6.0 to 7.0) or phenol red (range 6.8 to 8.4) & test-tubes with necessary fitments and 100 ml testing solution in rexene finish wooden box complete.
Taking down and lowering the serviseable/new column pipe by using boring lifting mechanical crane incl necessary lifting tools/accessories complete all as specified and directed. (Note : Supply of column pipe with collars shall be measured and paid separately under relevant items.
Supply, install, lowering into bore well and testing submersible pump set, electric driven having pumping capacity 60 LPM at 104 Mtrs head directly coupled with 3 Phase, 50Hz & 415 volts electric motor including of 50 RM Submersible cable of 3 Core x 6 Sqmm and suitable starter all as specified. Make: Kirloskar / KSB/CG/CALAMA.
Supply, install, lowering into bore well and testing submersible pump set, electric driven having pumping capacity 60 LPM at 104 Mtrs head directly coupled with 3 Phase, 50Hz & 415 volts electric motor including of Submersible cable of 3 Core x 10 Sqmm, 325 RM and suitable starter all as specified. Make: Kirloskar / KSB/CG/CALAMA.
Supply only pipe galvanised 50 mm dia "Heavy class" including fittings, IS : 3589 Gr 330, lowering into bore well all as directed.
Supply and fix Gun - metal non return valve 40mm bore, vertical/horizontal type with ISI marked and fixed with suitable size of union as directed. Make: KIRLOSKAR/LEADER/ ZOLOTO/NETHA
S & F 50mm dia Gun-metal, globe or gate valve ISI marked with iron wheel head, screwed at both ends for iron pipes Make: KIRLOSKAR/LEADER/ ZOLOTO/NETHA
Supply only Flat copper cable 3 core 6 sqmm multistranded conductor for submercible pump fixed in repairs and testing complete. Make of cable : Polycab, Havells, V'guard,
Supply and install split AC units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity 1.5 TR 5 Star rated inverter split AC Make: Voltas, Blustar, LG
Supply and fix water cooler electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour. Make: Voltas, Blustar, Usha
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .