Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC H NO 02 SAGAR ROAD OPPO MKD GIRLS SCHOOL TILAK NAGAR BIKANER 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L1 | Accepted-AOC Lowest and reasonable bidder. | |
| 2 | L2₹29.5 L+₹2.1 L (7.68%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder. | |
| 3 | L3₹32.3 L+₹5.0 L (18.2%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Other than lowest bidder. |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAL
GE AF NAL
AS DESCRIBED IN BILL OF QUANTITIES
2023_MES_600612_1
GE (AF) NAL/T-37/2023-24
Open Tender
Civil Works
Item Rate
243 days
GE AF NAL
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
Yes
GE AF NAL
₹60,000
Yes
9 Sept 2023
2 Jun 2023
30 Jun 2023
2 Jun 2023
28 Jun 2023
16 Jun 2023
2 Jun 2023 - 10 Jun 2023
Amount
Demolition of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge.
Taking down cement plaster of any description on brick/stone walll incl raking out joints hacking for key scrubbing down water all as speicifed.
M&L for 15 mm thick cement plaster in (1:6) on fair faces of brick work finishing even and smooth w/o using extra cment .
M&L for Rendering 15mm thick cement mortar 1:4 on brick or concrete wall surface finished even and smooth without using extra cement.
Material and labour 10mm thick rendering on concrete surface in cm 1:3 as in ceiling surface to be finished even and smooth without using extra cement complete all as specified and directed..
M&L preparing newly plastered wall surfaces and applying two coat of weather proof exterior acrylic emulsion over and including one coat of primer in camouflage pattern complete all as specified and directed by Engr -in-charge.
Material and labour two coats of white wash on newly plastered surfaces of wall including preparation of surfacs complete all as specified and directed.
Material and labour three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
M&L for prepration of old surfaces of ceiling and Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of white wash on ceiling complete all as specified and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.
Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified .
M&L for Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed by Engr-in-charge.
M&L for Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed by Engr-in-charge.
All as per description of item No-14 above but 1.5m to 3m height from base complete all as specified and directed by Engineer-in-Charge.
All as per description of item No-14 above but 3m to 4.5m height from base complete all as specified and directed by Engineer-in-Charge.
All as per description of item No-14 above but 4.5m and above height from base complete all as specified and directed by Engineer-in-Charge.
Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed section
Dismantling of wrought iron or mild steel work of any description not ohterwise provided for complete all as specified and directed.
Excavating in post holes ( or similar holes ) each n.exc 0.50cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm as in Hard/Dense soil
M&L for cement concrete type C2 1:3:6(40mm graded aggregate) as in posts( including caps and bases), complete all as specified and as directed.
M&L for steelwork in tubular trusses for including cutting bending top to shape as directed drilling holes matching for net or wire, including embeding in concrete and screwing all necessary drilling/welding work etc. complete and all as specified
S&F MS plain plates, square cut, with riveted, bolted or welded attachment FE-410-W (Gde-E-250) quality A as specifed , complete all as specified and as directed.
S&F mild steel screw bolts (machine made) with hexabonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long, diameter of neck in 5 to 10mm , complete all as specified and as directed.
M&L for MS work in Roof trusses (framed), trussed, purlins, crane gantries, rails, posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.including special shaped washer etc. complete and including all necessary drilling or cutting holes in brick/ concrete surfaces and making good, welding work, bolting or reveting etc and similar work conforming to Fe-290 Gde E-165 complete and all as specified .
M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any guage/ thickness incl Nainital pattern or similar pattern roof covering in patches complete all as specified & directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L preparation of old painted fencing posts, steel gates, steel shutters etc or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of tint/shade as approved all as specified and directed.
M&L preparation of old painted steel surfaces of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint of tint/shade as approved complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving exc.15 cm thickness above ground level and removing the rubbish outside MoD land complete all as specified & directed.
Material and labour 75mm thick PCC 1:3:6 type C-2 ( using 20mm graded aggregate) as in plinth protection laid in alternate bays, surface finished even & smooth without using extra cement including making joints complete all as specified and directed.
Material and labour 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded aggregate) thick as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed.
Material and labour 50mm thick PCC (1:2:4) type B-1 ( using 20mm graded aggregate) as in flooring complete all as specified and directed.
Plastic dividing strips 38mm Width of strip , 1.5mm thick andinserted in position,conform to design all as specified and directed
Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) not exc 1.5 sqm each complete all as specified and directed.
S&F factory made box type steel window 1.25mm thick ERW hollow P section of each frame size 60mmx25mm including grill using 10 sqmm bar double rebated with glass shutter comprised glazed & Skelton shutter ERW section 50mmx20mm & 1mm thick with two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window. ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) MS pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10 mm squre guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame
(ix) applying two coat of synthetic enamel paint over one coat of red oxide primer, including preparation of new steel surfaces. (x) 3mm thick sheet glass ordinary quality and with oil putty in squre n exc 0.50 sqm in each pane fixed in glazed /guage skelton shutter of window xi) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Note: (i) Windows shall be povided as per the TD of Chief Engineer Chandigarh Zone, TD-219 i.e typical details of Box window (Steel) with fly proof shutter. (ii) The mode of measurement shall be only one for the set of two i.e wire mesh window and glass window at one location and nothing extra shall be measured on this account.
S&F factory made box type steel window 1.25mm thick ERW hollow P section of each frame size 60mmx25mm including grill using 10 sqmm bar double rebated both guage and glass shutter comprised gaused glazed & Skelton shutter ERW section 50mmx20mm & 1mm thick with two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window. ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) MS pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10 mm squre guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame
(ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed skelton shutterof window (x) 3mm thick sheet glass ordinary quality and with oil putty in squre n exc 0.50 sqm in each pane fixed in glazed /guage skelton shutter of window xi) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Note: (i) The mode of measurement shall be only one for the set of two i.e wire mesh window and glass window at one location and nothing extra shall be measured on this account.
Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) Exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.
Supplying & fixing 1.25 mm thick Pressed Steel door frames size 125x60mm for double doors with one or more rebates inclding necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all as specified.
Supplying & fixing solid PVC door frames of sizes 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelam PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , both side prelam PVC sheet used insted of plain colour PVC sheet. Stile and rail feathered at edges paneling of prelam solid sheets 10 mm thick to be fitted in the MS framewelded, sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement complete all as specified in SSR Part -II.
S&F factory made 30mm thick flush shutters, solid core construction,with particle board core and plywood face panels,commercial type on both sides include for the provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specified and directed.
Supply and fixing Aluminium butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 150 mm size extruded aluminium aluminium alloy handels fabricated type, anodised fixed with stainless steel screws complete all as specified and directed.
Supply and fixing 300mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded setions and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws complete all as specified and directed.
Material and labour for surfaces of any description not other describe over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, including preparation of new wooden surface.
m/s gaurav enterprises
Beenu Co. Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .