Widening and Strengthening of Kundanganj-Paschimgaon-Tera- Aghoura (ODR)Road

Amount

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to achive the dry density not less then 97% as per table 300-2. work should be done as per MORTH & H Specification Clause 305 complete in all respects. (Including all labour & T&P with all taxes complete but excluding GST)

Construction of Subgrade with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to the desired dry density not less then 97% as per table 300-2. work should be done as per MORTH & H Specification Clause 305 complete in all respects. ( Compaction Only)(Including all labour & T&P with all taxes complete but excluding GST)

Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material.(Including all labour & T&P with all taxes complete but excluding GST)

Construction of granular sub-base by grade-1 for providing well graded material from approved quarry , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401.(Including all material, labour & T&P with all taxes complete but excluding GST)

Scarifying existing bituminous road surface .(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing, laying, spreading and compacting graded stone aggregate from approved quarry to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve to achive the desired compaction as per MORTH & H Specification Clause 406 complete in all respects.(Including all material, labour & T&P with all taxes complete but excluding GST)

Construction of earthen shoulders with material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to the desired dry density not less then 97% as per table 300-2. work should be done as per MORTH & H Specification Clause 305 complete in all respects.

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mannual means as per MoRT & H Specifications Clause 502 complete in all respects.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing and applying tack coat with bitumen VG-10 using Bitumen Boiler with sprayer at the rate of 0.20 kg per sqm on the prepared surface cleaned with hydraulic broom as per MoRT & H Specifications Clause 503 complete in all respects.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing and laying dense graded bituminous macadam Grading 2 with Batch type hot mix plant producing 120 TPH using crushed aggregates from approved quarry of specified grading, premixed with bituminous binder VG_30 @ 4.5 % , transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled and tandem roller to achive the desired compaction as per MORTH & H Specification Clause 505 complete in all respects.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing and laying bituminious concrete Grading 2 with Batch type hot mix plant producing 120 TPH using crushed aggregates from approved quarry of specified grading, premixed with bituminous binder VG_30 @ 5.4%, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, tandem roller and Pneumatic Tyre roller to achive the desired compaction as per MORTH & H Specification Clause 507 complete in all respects.(Including all material, labour & T&P with all taxes complete but excluding GST)

Construction of Approaches to side/ link road junction improvement with WMM 75 mm , BC 30 mm on prepared Tack coat Surface.(Including all material, labour & T&P with all taxes complete but excluding GST)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.(Including all labour & T&P with all taxes complete but excluding GST)

Plain cement concrement 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compected by vibration including curing for 14 days.(Including all material, labour & T&P with all taxes complete but excluding GST)

Brick work in 1:3 cement and coarse sand mortar including supply of all material, labour T .P. etc. required for proper completion of work.(Including all material, labour & T&P with all taxes complete but excluding GST)

Furnishing and Placing Reinforced cement concrete M-20 in super-structure as per drawing and Technical Specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

Furnishing and Placing Reinforced cement concrete M-25 in super-structure as per drawing and Technical Specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

Supplying, fitting and placing HYSD bar / SAIL TMT bar reinforcement in super-structure complete as per drawing and technical specifications.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications.(Including all material, labour & T&P with all taxes complete but excluding GST)

Drainage Spouts complete as per drawing and Technical specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

Laying reinforced cement concrement pipe 1000 mm dia for culverts on first class bedding of granular material in single row including fixing coller with cement motar 1:2 but excluding excavation protection work back filling concrete and masonary works in head walls as per MORT & H specification 2900 laying in diversion and hume pipe culvert.(Including all material, labour & T&P with all taxes complete but excluding GST)

Laying reinforced cement concrement pipe 600 mm dia for culverts on first class bedding of granular material in single row including fixing coller with cement motar 1:2 but excluding excavation protection work back filling concrete and masonary works in head walls as per MORT & H specification 2900 laying in diversion and hume pipe culvert.(Including all material, labour & T&P with all taxes complete but excluding GST)

Laying reinforced cement concrement pipe 1000 mm dia for culverts on first class bedding of granular material in single row including fixing coller with cement motar 1:2 but excluding excavation protection work back filling concrete and masonary works in head walls as per MORT & H specification 2900 laying in diversion and hume pipe culvert.(Including all material, labour & T&P with all taxes complete but excluding GST)

Laying brick soling on prepared subgrade with brick on end edging according to lines, graded and cross section shown on the drawing filling joints with sand and earth spreading 25mm thick layer of earth over brick soling, watering and rolling the same with three wheel road roller 80-100 KN as per technical specification clause 412.(Including all material, labour & T&P with all taxes complete but excluding GST)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. (Including all labour & T&P with all taxes complete but excluding GST)

Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.(Including all labour & T&P with all taxes complete but excluding GST)

Sand Filling in Foundation Trenches as per Drawing & Technical Specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(Including all material, labour & T&P with all taxes complete but excluding GST)

Brick masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering as per drawing and technical specifications.(Including all material, labour & T&P with all taxes complete but excluding GST)

M-25 Grade Reinforced Cement Concrete in open Foundation complete as per Drawing and Technical Specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

Furnishing and placing M-25 Grade reinforced cement concrement in super structure as per drawing and Technical Specifications.(Including all material, labour & T&P with all taxes complete but excluding GST)

Supplying fitting and placing HYSD bar / SAIL TMT bar reinforcement in super-structure complete as per drawing and Technical Specifications.(Including all material, labour & T&P with all taxes complete but excluding GST)

Supply and fixing PVC pipe 110mm dia approved quality for weep holes including cost of all material, labour, T&P etc. required for proper completion of work as per direction of Engineer-in-charge.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

100 mm dia galvanised steel Drainage Spouts with all clean out and other fixture from deck slab as per drawing and Technical specification 2705.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providind and laying Filter materail underneath pitching in slopes complete as per drawing and technical specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.(Including all material, labour & T&P with all taxes complete but excluding GST)

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.(Including all material, labour & T&P with all taxes complete but excluding GST)

PAWAN KUMAR SINGH

M/S DEEPAK KUMAR AGARWAL

M/s Raj Laxmi Enterprises

M/s Ram Singh Agarwal

M/s AP & Associates

M/S RAJ CONSTRUCTION