Repair/replacement of street lights of GE West area under GE(East) Ferozepur Cantt

Amount

Disconnecting and taking down repairable HPSV/HPMV/MH lamp type street light fitting of any type and capacity and make from existing 9 metre /11 metre pole for checking to find out the defects cleaning the bowl and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : (i) The Spare parts will be measured and paid separtely. (ii) All type of T&P for repairing of street light will be provided by the contractor at own arrangememt.

Supply only porcelin brass holder for 150/250 Watt street light fitting complete all as specified and directed.

Supply only HPSV lamp of cap 70 Watt complete all as specified and directed.

Supply only HPSV lamp of cap 150 Watt ISI mark complete all as specified and directed.

Supply only HPSV lamp of cap 250 Watt complete all as specified and directed.

Supply only ignitor suitable for HPSV/MH lamp fitting of cap 70/150/250 Watt complete all as specified and directed.

Supply only copper wound ballast chock of 70 Watt, 240 Volts complete all as specified and directed.

Supply only copper wound ballast chock of 150 Watt, 240 Volts complete all as specified and directed.

Supply only copper wound ballast chock of 250 Watt, 240 Volts complete all as specified and directed.

Supply only LED Lamp 45 W ,240 volts, 50 Hz, Warm White in colour, complete all as specified and directed.

Supply Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

Disconnecting and taking down repairable LED type street light fitting of any type and capacity and make from existing 9 metre /11 metre pole for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : (i) The Spare parts will be measured and paid separtely. (ii) All type of T&P for repairing of street light should be provided by the contractor at own arrangememt.

Supply only LED driver 240Volt 50Hz for 25 watt LED fittings complete all as specified and directed.

Supply only LED driver 240Volt 50Hz for 40 to 48 watt LED fittings complete all as specified and directed.

Supply only LED driver 240Volt 50Hz for 60 to 90 watt LED fittings complete all as specified and directed.

Supply only LED surge arrester 240Volt 50Hz for 45 to 75 watt LED fittings complete all as specified and directed.

Supply only LED surge arrester 240Volt 50Hz for 75 to 90 watt LED fittings complete all as specified and directed.

Supply only LED bulb set for street light complete set 240Volt 50Hz for 40 to 48 watt LED fittings complete all as specified and directed.

Supply only LED bulb set for street light set 240Volt 50Hz for 60 to 90 watt LED fittings complete all as specified and directed.

Disconnecting and taking down repairable LED type street light fitting from High Mast Light of any type and capacity and make from existing 15 mtrs/16 mtrs high mast pole by taking down the LED light by roatating through Electric/Mechanical Mechanism for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : (i) The Spare parts will be measured and paid separtely. (ii) All type of T&P for repairing of High mast light should be provided by the contractor at own arrangememt.

Supply only LED driver 240Volt 50Hz for 120 to 150 watt LED fittings complete all as specified and directed.

Supply only LED surge arrester 240Volt 50Hz for 120 to 150watt LED fittings complete all as specified and directed.

Supply only LED bulb complete set 240Volt 50Hz for 120 to 150 W watt LED fittings complete all as specified and directed.

Retightening of Loose/ Disconnected Connection of HPSV/HPMV/MH lamp/LED type street light fitting of any type and capacity and make on existing 9 metre /11 metre pole for Cleaning of carbon from connecting wire and joint the connection as per existing Connections and refixing in original position,etc complete all as specified and directed. Note : (i) All type of T&P for Connection Checking and tightening of connection of street light shall be provided by the contractor at own arrangement.

Taking down old worn out /faulty LT UG Cable of size 10 Sqmm to 16 Sqmm 4 core complete all as specified and directed.

Laying only serviceable cable XLPE insulated and sheathed armoured 1100 volts grade heavy duty electric cable with multistranded aluminium conductor laid in trenches/duct through pipe, in floor on poles in and including aluminium thimble, Sleeve and proper insulating material i.e. PVC insulation tape complete and keeping Partly serviceable XPLE cable in safe custody for re-use in the work complete all as specified of Size 10 Sqmm 4 core complete all as specified and directed

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 4 core 10 sqmm including taking out old u/s cable complete all as specified and directed.

S & F cable PVC insulated and sheathed in service connection (WPTC)with Solid aluminum conductor flat off size 2 core 10 Sq mm including 4mm GI wire and porcelene insulated apart of 01 metre each ISI mark including taking out old u/s service wire complete all as specified and directed.

S&F cable PVC insulated sheathed twin core stranderd Aluminium conductor of size 2.5 Sq mm for connection of security /Street lights complete all as specified and directed.

S&F service cable PVC insulated sheathed twin core solid aluminium conductor of size 6 Sq mm for connection of security /Street lights complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for laying of cable foundations of poles/styas etc. and getting out in soft/loose soil complete all as specified and directed .

Removal of surplus excavated material n exc. 50 m and depositing where directed at a n. exc 1.5 m above the starting point.turning filling in, including spreading,leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Returning filling in including spreading , levelling watering and well ramming in layers each n.exc. 25 cm thick each layer and performing bottom surface to required gradient complete all as specified and directed.

M & L dry and clean fine sand for cable cushioning for cable protection complete all as directed. Note : The Punned down thickness shall be measured and paid seperatly

Supply and laying well burnt old size sub class 'B' bricks laid in trenches for cable protection complete all as specified and directed.

S&F in replacement of Factory made sheet metal encloser SPN single door type made out of CRCA sheet IP 43 protection 2 way 240 v dust and vermin proof includind clamps, nut-bolts for fixing of fixing on pole complete all as specified. make - Havells cat part no DHDESDP or other equivalant make from HPL/Indo asian of approved by GE.

S&F MCB single pole neutral 240 volts, 40 Amps, 10 KA complete all as specified and directed.

S&F MCB single pole neutral 240 volts, 63 Amps, 10 KA complete all as specified and directed.

Supply and errecting prestressed concete poles 7.5 mtrs long of cross section 102mm X 152 mm at top and 102mm X 281mm at bottom class 10complying with requirements of IS-1678-1978 including paints of poles in strips upto 1.5 metre from PCC block with two coats of synthetic enamel paint complete all as specified and directed.

.M&L for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in foundation of PCC pole/struts including necessary form work complete all as specified and directed.

.M& L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation of stay assemble etc incluing necessary form work complete all as specified and directed.

.M &L for plain cement concerete 1:2:4 type B-1 using 20 mm graded stone aggregate for coping around poles, incl necessary form work finishing even and smooth without using extra cement complete all as specified and directed.

Supply & fixing of LED Street light 45 Watt made up of pressure die cast housing with toughned glass Aesthetically designed roadway luminiare with excellent thermal management IP 66 protection Make- Havells cat part No-ENDURACITYLINERNEXGENSL48W LED757SASYBOPC or other equivalent makes from Crompton/Bajaj of approved by GE

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with impact resistance of 1K and 10KV external SPD complete all as specified and directed. Make- Havells cat part No-ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or other equivalent make from HPL/Crompton of approved by GE.

S& F LED flood light Jeta Neo 120 (120 W, 6000K) energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65, suitable for highlighting architectural facade and general purpose lighting.Make- Havells cat part No-JETAIRISFLS120WLED757APNBLTG or other equivalent make from HPL/Crompton of approved by GE.

S&F acrelic cover suitable for HPSV/MV light fittings of 70/150/250watt complete all as specified and directed.

Supply & fixing street light pole cable junction box IP-65 with metnic knockouts for cable entry and the box made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps bolts, nuts duly painted and MCB SP 6Amp etc complete all as specified & directed

S&F GI Bracket for street light fitting bend to shape made out of GI pipe light grade 40mm bore upto 1.2 mtr long etc complete with MS clamps duly painted with two coat of aluminum paint with nuts/bolts/washers for fixing arrangement to pole /wall complete all as specified and directed.

M&L Painting to old LT RCC pole upto 1.5 mtr height from PCC, of synthetic enamel paint with Yellow and Black of 30cm strips of each color upto 1.5mtr and including wiriting pole No. complete all as specified and directed .

M&L painting to steel tubular pole of size 9metre / 11 metre hight with two coats aluminium paint over a coat of red oxide primer including preparation of old painted surface complete all as specified and as directed

Supply and laying GI pipe 40 mm bore /Size "light grade " for cable protection including taking out old/broken/rusty GI pipe with MS clampscomplete all as specified and directed.

Marwaha Builders

Vee Vee Enterprises

Harmesh Kumar Sharma and Sons

Karan Enterprises

JAWAHAR CONSTRUCTION COMPANY

ABHISHEK AND COMPANY

M/S M H Builders