Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3,000
Closing Date
8 Sept 2026, 3:00 pm
Executive Engineer
Executive Engineer pwd Buildings C and M Division Cuddalore
Special Repairs to Roof Leakage in Health sub center building at kandamangalam in cuddalore District
2026_PWD_698007_1
TN3-4/2026-2027/Dt 25.08.2026
Open Tender
Civil Works - Buildings
Lump-sum
90 days
Kandamangalam
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹3,000
26 Aug 2026
26 Aug 2026
9 Sept 2026
26 Aug 2026
8 Sept 2026
26 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for plain Cement concrete etc., complete complying with standard specifications. | 5.21 | Cu.m | - | - |
| 2 | Clean removal of Cement plaster from walls etc., complete complying with standard specifications. | 72.51 | Sq.m | - | - |
| 3 | Repairs to doors and window , Ventilator including cost of fittings and hinges of required size and reepers etc complete complying with standard specification etc.complete., | 13.26 | Sq.m | - | - |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means | 5.61 | Cu.m | - | - |
| 5Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) | |||||
| 5.01 | For 25mm thick | 67.81 | Sq.m | - | - |
| 6 | Providing and Applying of Solar reflective Paint, acrylic polymer based elastometric water proofing coating having Solar Reflective Index more than 90 % as per ASTM E 903, specific Gravity of 1.30+/-0.10. For Existing Surface: The Surface Preparation including Jet wash , the Cracks are filled wherever required below 3mm of crack and application of three coats of paint to form 1mm thickness | 79.99 | Sq.m | - | - |
| 7 | Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. Solid panel PVC door with frame | 1.34 | Sq.m | - | - |
| 8 | Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1 mm thick) of size 100 mm x 60 mm with a rebate of 30 / 35 mm x 15 mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc., including dismantling, making necessary chipping and holes in RCC columns, walls with power drills to the extent required, including providing concrete 1 : 2 : 4 inside the box curing etc complete complying with standard specifications and as directed by the departmental officers - SS Door Frame with thickness of 1 mm / 1.60 mm | 4.8 | RM | - | - |
| 9Supplying and fixing solid core flush shutter of following type with thickness and necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm) , 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
Tenderconditions4.pdf
Tender Documents • 1.14 MB
BOQ_839071.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].