CERTAIN SPECIAL REPAIR WORKS UNDER GE(WEST) JABALPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness incl part chipping (below or above ground level) complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified and directed.

Demolition of reinforcement cement concrete below or above ground floors of any description n exc 15 cm thickness (Reinforcement to be cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

Dismanling of brick work built in cement mortar of any description including all quions, arches, pillars, etc complete and removing rubbish from the premises all as specified and directed.

Taking down cement plaster from wall/ceiling etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

Taking down shutter exc 1.00 but n exc 2.0 Sqm Each of any description complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed .

Dismantling of timber scantlings unframed 40Sq Cm and over in section, in any position from Roof, of any description complete all as specified and as directed.

Dismantling of plain/ corrugated AC Roof sheeting of any description including nainital or similar pattern from roof covering and removing from site complete all as specified and as directed .

Dismantling of wall and ceiling boards of any description including cover fillets complete all as specified and directed.

Taking down 15mm dia steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 20mm dia steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 25mm dia steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness from Kitchen Platform, floors, aprons etc complete and removing debris from the premises complete all as specified and as directed .

Demolition and breaking up 150mm drain pipe of any description (salt glazed ware, AC or reinforced concrete ) set in cement mortar complete and removing Debris from the site complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,fixed in concrete, including taking out embedded portion and making good the disturbed ground and removing debris from the premises complete all as specified and as directed .

Dismantling chain link fencing wire mesh, any type complete all as specified and as directed .

Taking down of eaves gutter,rain water pipes ,AC/PVC pipes upto 110mm dia, of any size or pattern including all fittings etc complete all as specified and directed.

M & L for 9 to 10mm thick Double Charge Vitrified Coloured Ceramic tiles (square/ rectangular), area of each tile exc 0.36 sqm but n exc 0.42 sqm, in floors etc. laid over and including 15 mm thick Cement mortar (1:6) screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

All as per item No 21 above but as in skirting/dado etc., laid over and including 10 mm thick Cement Plaster in CM (1:4), complete all as specified and directed.

M&L for 18 to 20 mm thick granite (Zed Black/Ruby Red) Stone Work (table rubbed and polished ) as in cooking platforms, and like, laid over and including 15mm thick cement screed base in CM (1:4) including pointing with white cement slurry with admixture/pigment to match with the shade of slab including Border etc and rounding to edges complete all as specified and directed.

M&L for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone, laid over and including 15 mm thick screed bed of CM (1:4) ,rounding,chamfered as in tread and riser of steps, jambs, pillars, window- cills, complete as specified and as directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exc 0.11 sqm but not exceeding 0.18 sqm in floors etc, set & jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 300X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for machine cut cudappa stone slab 20 to 25 mm thick over and including cement screed base 15mm thick in CM 1:6 in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, laid over and including 50mm thick river sand/M-sand complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4), type B-0, (using 12.50 mm graded stone aggregate) as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), as in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for fixing of hold fast etc including necessary form work complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in flooring including finishing top surface even and smooth without using extra cement complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in floor sub base and finished even and fair complete all as specified and directed.

M&L for Coloured cement concrete chequered tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors, laid over and including 15 mm thick screed bed in CM (1:6) for laying floor finish complete all as specified and all as direcred.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bedding and haunching to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe complete all as specified and as directed.

M&L for Precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. ( Note : Reinforcement shall be measured and paid for separately.) .

M&L Brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L Brick work with sub class 'B' fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4), mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. ( Note : Liquid Water Proofing Compound shall be measured and paid for separately as "Supply only".)

M&L rendering 5 mm thick in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

M&L for Cutting holes in brick walls exc 1/2 brick but n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete all as specified and directed. ( Note : This item shall be operated for inserting of holdfast at new location.)

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.

S&F PVC moulded Solid door frame of size 50mm x 95mm made out of plain coloured PVC sheet and reinforced as per manufacturer designwith single rebated and fixed in opening as per specifications complete all as specified and as directed.

S & F 35 mm thick factory Made second class hardwood,moulded glazed/gauged door with pre pressed lamination on both side, solid core construction & prepared to receive glass/wire mesh including fixing of stainless steel wiremesh of nominal dia 0.36 mm , 2 Nos door Aluminium handle, 0.3 Nos stainless steel butt hinge of 100mm , 2 nos Aluminium tower bolt 150mm length in each shutter complete all as specified in SSR Part I(2009) and as directed and fitted to chowkhats complete all as specified and as directed.

S & F 35 mm thick Factory made moulded flush door with pre pressed lamination on both side, solid core construction 2 Nos Aluminium door handle, 0.3 Nos stainless steel butt hinge of 100mm , 2 nos Aluminium tower bolt 150mm length and 300 mm length Aluminium sliding door bolt in each shutter complete all as specified in SSR Part I(2009) and as directed and fitted to chowkhats complete all as specified and as directed.

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, Width of flaps (when open) 40mm complete all as specified and directed.

S&F in repair 50 mm size magnet catcher, cupbord lock, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for MS box type section With rebate (single/double) suitable for door frame for fixing of door shutter etc complete as specified and directed.

M & L Aluminium powder coated (minimum thickness of powder coating 50 micron) sliding windows (three track) of frame of size bottom section 92.00x31.75x1.50mm ( Section No 20832),Top and Sides of size (Section No 20831) with Powder coated aluminium shutters Top and bottom size 40x18x1.55mm (section 20736) and sides Styles of size 40x18x1.55mm (section 20738) and lock side shutter frame size 40x18x1.45mm (section 20737) including rubber gasket,beading and locking arrangement , both glazed and gauzed with 5.0 mm thick glass, stainless steel wire cloth netting (0.36mm nominal dia and averege width of aperture 1.40mm), and fixed including necessary glazing clips, rubber packing, aluminiunm snap beading screws and aluminium fittings of standard size complete all as specified and directed. ( Notes : (i) Glazing and stainless steel wire cloth Shall be included in the quoted rate

S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) Ventilator louvers type frame top and sides of size 31x42x1.6 mm ( Section No 20558) rectangular tube of size 40x20x2.0mm ( Section No 14019) and middle vertical of size 42x46.20x1.60mm ( section No 20560) and clip for fixing in wiremesh and glass of size 19x17.30x0.90mm ( section No 19360) including rubber gasket, beading, anodised aluminium snap beading, screws, handle,fixing 4.00 mm thick glass frosted glass , 0.36 mm nominal dia wiremesh with necessary rubber beading gasket, Louvers plate etc for Ventilator etc including necessary plaster, painting ,cill and making good the disturbed portion complete all as specified and directed.

S & F 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /cum. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

Butt hinges 100mm, medium weight, cold rolled Stainless steel, and fixed complete all as specified and directed.

S&F, Mild steel sliding door bolts 300mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F mild steel, 200 mm long ordinary helical door spring including roller and roller plate complete all as specified and directed.

S&F Floor 40-50 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring ,fixed in floor complete all as specified and directed.

S&F stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.

S & F 2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed.

Dismantling water tanks capacity exc 250 Ltr but n exc 500 Ltr and removing from site all as specified and directed by Engr-in-charge.

Dismantling water tanks capacity exc 500 Ltr but n exc 1000 Ltr and removing from site all as specified and directed by Engr-in-charge.

Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repair gunmetal, globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.

S&F 25 mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

S&F for 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors fixed with solvant suitable for CPVC pipe including Brass threaded fittings for fixing taps etc complete all as specified and directed.

S&F for 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors fixed with solvant suitable for CPVC pipe including Brass threaded fittings for fixing taps etc complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wall Mixer three in one including Provn of OH shower and including hand shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed

S&F vitreous china wash basin white Oval size 550 x 400mm Table top excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long complete all as specified and directed.

S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

S&F, in repair, PVC connection 15mm dia size and 600 mm long with 2 Nos brass check nuts and its washers complete all as specified and as directed.

S&F in repair 15mm bore bib tap fancy type chromium plated cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F, in repair, Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F, in repair, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F, in repair, 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.

S&F, in repair, chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed

S&F, in repairs, 18mm thick ply, PVC sheet with prelaminated on one side of approved texture as in Kitchen cabinet and cupboard etc (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed.

S&F stainless steel kitchen basket in various type of basket , plain basket height 4", Thali basket 8" height, Cup saucer 4" height and perforated cutlury basket 4" height complete all as specified and directed.

S&F hettich channel for basket, size 46mm wide complete all as specified and directed.

S&F stainless steel hinges for cupboards of senso (as per 3D designs) inclduding all connection fitting as complete all as specified and directed.

S&F Handles of senso (as per 3D designs) 150 mm including all connection fitting as complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.

M&L for prepartion Surfaces of new wood or wood based materials of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of plastic emulsion with 2mm thick wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coats of plastic emulsion over 2mm thick birla wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over and including water proof external putty complete all as specified and directed.

M & L for complete removal of existing treatment and prepration of old surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over and including water proof external putty complete all as specified and directed.

M&L for Preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for laying DWC 150 mm dia pipes in trenches Class SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed.

S & F Door Seal rubber etc, complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm(AZ-150) of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm(AZ-150) of any colour having tensile strength of 550Mpa as in roof covering/cladding/ ridge to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, wind ties etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. conforming to Fe-290 ( Gde E-165) complete all as specified and directed.

M&L for Providing and filling epoxy putty into RCC crack after opening up RCC cracks in V– groove manner approximate 10 mm wide & 10mm deep using mechanical cutter, properly cleaning the same to remove loose dust dirt etc and filling the same using Nitocote VF –three component, solvent free, thixotropic, Epoxy resin based putty having 100% solid contents mixed density of 1.6 g/cc, compressive strength – 50 N/mm ², pot life of 40 minutes at 27 degree C, Drying time 8 hrs. recoatable time 24 hrs. And finishing in line and level with existing concrete surface etc. complete complete all as specified and directed. (Make; - Thermax/ webac chemicals/ chemco system as approved by the GE ) Notes : (i)Quoted rate shall be deemed to be inclusive of materials, labours, tools and plants, scaffolding and working upto height 6 mtr etc. complete as per specification and as directed by GE . (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets, netting etc which are required for safety of worker working at height exceeding 3 mtr shall be mandatory and deemed to be inclusive in quoted rates

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good the floor to match with existing specification complete all as specified and directed.

M & L for snap grid false ceiling system of E board exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), and fixed with pre painted 4mm thick E board of approved design and with provn of light fixture complete all as per manufacturer instructions and as directed.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

M&L MS work as in wind ties for roof including securing bolts, drilling holes, notching for wire etc complete all as specified and directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.

S & F in repair 40 mm thick PVC waste pipe of minimum length 1 mtr for kitchen sink and WHB etc complete all as specified and directed.

S & F in repairs Two way bib cock complete as specified and as directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match with the existing floors complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. complete all as specified and directed.

S & F in repairs Corner Glass Shelves including C type bracket fixed with steel screws complete all as specified and directed.

S&F in repair Curtain rod 25mm dia stainless steel rod with decorative knobs of approved quality etc complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Sink Mixer for hot & cold water with long shank and fly nut complete all as specified and directed

S&F in repair 20mmx3mm SS flat (bracket) including fixing with rawl plug and SS screw complete all as specified and directed.

S&F brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes for connection including necessary packing union and taking down of old unserviceable trap of any description complete all as specified and directed.

S&F for stainless steel chromium plated single lever basin mixer including all necessary fittings comlete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete as specified and as directed.

S&F in repair 32mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repair Towel ring round with round flange complete all as specified and directed.

S&F, in repair, vitreous china rimless single piece WC with with UF soft close seat cover , hinges accessories set (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and directed.

Excavating in soft and loose soil. in post holes (or similar holes) each n.exc 0.5 cu.m getting out, returning filling in and ramming earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L cement concrete (1:3:6) type C-2 (40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F M&L machine cut kota stone slab flooring 20-25mm thick laid over and including cement Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L Rolled sections of Fe 410 -W (Gde-E- 250) quality-A as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for hardcore, broken stone / boulders, gauge n exc 63 mm laying in layers complete all as specified and directed.

M&L for 150 mm thick cement concrete type C-2, 1:4:8 using 40mm graded stone aggregate as in sub-base complete all as specified and directed.

S & F 30 mm thick 2nd class hardwood moulded flush door with pre pressed lamination on both side, solid core construction 2 Nos door handle, 0.3 Nos butt hing of 100mm , 2 nos tower bolt 150mm length and 300 mm length sliding door bolt in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats complete all as specified and directed.

S&F for 1.25mm thick mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

S&F, Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper with 2mm thick wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

Complete removal of existing surface and applying 2 coat of exterior emulsion paint over a coat of Primer on old decorated surfaces including preparation of surfaces complete all as specified and directed.

M & L 60 mm thick machine pressed coloured precast concrete rubbber moulded interlocking paver block of M-35 Grade any shape and size conforming to IS 15658-2006, laid over and including 50mm thick river sand/ M-sand complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like all as directed including necessary form work complete all as specified and directed.

M & L for 100mm thick Cement concrete type D-2, 1:4:8, using 40mm graded stone aggregate in subbase complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement, laid over and including 10 mm thick rendeing in CM (1:4) complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 in two coats (10 mm first coat incl dubbing coat finished even & smooth without using extra cement and 5mm second coat. Both coat mixed with WPC @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions complete all as specified and directed. Note : Liquid WPC will be measured and paid separately as "Supply only".)

S&F in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper over 2mm thick birla wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M&L coloured high abrassion resistance tiles 10 mm thick of size 300 x 300 mm (square/rectangular)conforming to IS -4457 2007, in floors, open areas, terraces, open verandahs etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 25mm thick cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in sub floors bedding below screed bed as specified in above item complete all as specified and directed.

S & F powder coated aluminium partition including 5 mm thick Designer glass half panel and 18 mm thick particle board both side laminated , fixed type without sash bar, aluminium section including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and directed

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.

S&F in repairs vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed

S&F, in repair, chromium plated, urinal spreader complete all as specified and directed complete all as specified and directed.

S&F rolled mild steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc complete all as specified and directed.

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

Demolition of RCC jali in any description in any position all as specified and directed by Engr-in-Charge.

M&L for ready made precast cement concrete louvered and jali 40-50 mm thick of approved design set in cm 1:4 including all mouldings all as specified and directed by Engr-in-Charge.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc complete all as specified and directed by Engineer in charge.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ MCB AC BDB/Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc complete all as specified and directed at site.

Taking down the ceiling fan/exhaust fan in situ and depositing it in MES store complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site complete all as specified and directed.

M&L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M/L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.00 Sqmm Earth wire in One RM length Measured as one unit length.

Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-stranded copper conductor FRLSH cable 1100 Volts grade drawn into and concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup wahsers and PVC insulated 1.5 Sqmm multi-stranded copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge for One light Point controlled by one switch.

….do…. but for one Fan Point controlled by one switch.

….do…. but for one Bell Point controlled by one switch.

….do…. but for one socket point 5 Amp controlled by one switch on same board.

….do…. but for one socket point 5 Amp controlled by one switch on Independent board.

Description all as per item No. 184 here in before but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge .

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge.

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge

S&F in replacement of frame plate for modular switch 1 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 2 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 3 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 6 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement MS Housing box 1/2 module suitable for modular switch as per existing switch box and making good the disturbed surface complete all as specified and as directed.

S&F in replacement MS Housing box 3 module suitable for modular switch as per existing switch box and making good the disturbed surface complete all as specified and as directed.

S&F in replacement MS Housing box 4/5 module suitable for modular switch as per existing switch box and making good the disturbed surface complete all as specified and as directed.

S&F in replacement MS Housing box 6/8 module suitable for modular switch as per existing switch box and making good the disturbed surface complete all as specified and as directed.

S&F in replacement of modular switch 6-10 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F in replacement of modular socket, 6A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed.

S&F in replacement of modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed .

S&F in replacement modular fan regulator, 2 Module 4 step 180w heavy duty 230 volts as per existing model/make complete all as specified and as directed.

Supply and fixing in repair of LED lamp rotary type/holder type of 9 watt all as specified and directed.

Supply and fixing in replacement of decorative wall light fitting with and including LAMPS 12 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Sec-l), complete all as specified and as directed.

S & F in repair of LED Decorative /mirror light fitting 10watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.

S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed by Engineer in charge .

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site.

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in charge

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and directed by Engineer in charge

Supply & Fixing in repair modular AC box (earth plug socket) complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S&F in replacement modular bell push switch piano, flush type, 6 Amps complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, PVC body complete including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supplying and fixing,testing the water heater storage type 25 litres, BEE Five star Rated capacity and after connecting electric and water connection and screwing nuts and bolts , anchor hold fast to fixed on wall and making the good the disturbed surface, complete all as required and as directed at site.

Supply and install electric chimney max 1350 Cum ISI mark, with all fixing arrangemnts and exhaust pipe as required on site , all as per reuqired and directed by Engg In Charge.

Supplying and fixing,testing the water heater 3/5 litres, BEE Five star Rated capacity and after connecting electric and water connection and screwing nuts and bolts , anchor hold fast to fixed on wall and making the good the disturbed surface, complete all as required and as directed at site.

S AND fix wall mounting fan 450 mm PVC body remote controlled, 230 volts with all fiximg arrangements , connecting the connection to celing rose / socket complete all as per required and directed.

M&L for switch socket combination multipin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge.

S & F for Switch Piano type single pole 5 amp, AC 230 Volts complete all as specified and directed at site.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed

M/L for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

S&F LED light fitting square 57x57 CM Not less than 36 watt along with fixture Recessed mounted LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and directed by Engineer in charge

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed

M&L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Supply,laying & fixing double wall corrugated (DWC) pipes of size 50 mm outer dia and 38 mm inner dia made of high density polythethyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc with all as required and specified as directed .

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ fly ash bricks laid dry flat complete all as specified and directed by Engr in charge.

Taking down carefully ceiling fan/Exhaust Fan of any sweep and size and depositing to MES store and Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr in charge.

S & F MCB TP 25 to 63 Amps, 240 Volts, minimum 10 KA, "C" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed (Note :- Proper and suitable size cable copper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating)

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp, pf 0.98 370/360 rpm air delivery 220 m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet Radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, PVC body complete including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 50 Sqmm complete all as specified and directed.

Schedule of credit amount of Rs 1,51,808.00 to be deducted during AOC

lodhi builders (BID ID -3277922)

M/s PARASRAM MULCHANDANI (BID ID -3273503)

DOBARIA BUILDCON (BID ID -3273262)

M/S Modern builders (BID ID -3277206)

Tiki Water proofing Co (BID ID -3273750)

C L BHATIA (BID ID -3277781)