Renewal of BT surface road at Ward No 12,14,10

Amount

Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Complete

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm &0.528m3 of 22.40-2.36mm &0.396m 3of2.36mm and below metal graded stoneag gregate to Wet mix macadam (WMM) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniformlayers with paver in subbase /base course on wellprepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime Coat of 7kg/10sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder including labour charges for applying the required quqntity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications.

Providing and laying Tack Coat over 2.50 kgs/10 sqm over the WMM surface treated with binder using 2.5kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder including labour charges for applying the required quqntity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying Tack Coat over 2.00 kgs/10 sqm over the WMM surface treated with binder using 2.5kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder including labour charges for applying the required quqntity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and Laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.5-13.2mm, graded metal and 0.25 cum of 13.20-2.36mm graded metal and 0.23 cum of 2.36mm & below and with 53.20 Kgs of 60/70 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix in require dtemperature for uniform thickness of 50mm with mechanical paver to the specified grades and crosssections and compaction by Vibratory roller to there quired density etc., including labourcharges for loading bitumenin to bitumen tank and metalt ofe ederunit ,labour forattending to paversite etc.,including hire charges and fuel charges for 20-30t CMP with bitumen boiler,tippertrucks, paverfinisher, vibratory roller sand all other tools and plants required, including all otherincidental charges etc.,complete using CMP clause 505of MORTH Rev-5 specifications.

Providing and laying Bituminous concrete to 30mm thick using 0.13 cum of 19.00 -9.50mm, graded metal and 0.17 cum of 9.50-2.36mm graded metal and 0.26 cum of 2.36mm & below metal with 45.27 kgs 60/70 bitumen & 5.03kg of plastic waste (Total-50.30kg) and for premixing per 10sqm including cost and conveyance of all materials to CMP site heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tones capacity, conveying the mix by tipper trucks to paver site, spreading the mix in required tempeature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper tracks, paver finisher/ Vibratory rollers and all other tools and plants required, including all other incidental charges etc., complete using CMP clause 507 of MORTH Rev-5

Road Marking with hot applied thermoplastic compound with reflect rising glass beadsd on bituminous surface providing and laying of hot applied thermoplastic compound 205mm thick including reflect rising glass beads @ 250gms per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC :35. The finished surface to be level uniform and free from streadks sdand holes etc., complete.(as per MORT & H Specification)

Raising the existing man hole in heavy type including the removing the existing the man hole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20mm jelly for raising the existing manhole wall and using CC 1:2:4 with 20mm chips for finishing the top surface of manhole etc., complete

Add GST 18%

PERIYASAMY MURALI (BID ID -1234363)