Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹33.0 L+₹81,661.50 (2.54%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹33.5 L+₹1.3 L (4.12%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹33.8 L+₹1.6 L (5.06%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹34.0 L+₹1.8 L (5.68%)Rejected-Finance 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹42.1 L
EMD Value
₹84,300
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 SP Marg, Lucknow Cantt-226002
SPECIAL REPAIR TO QTR No 20/4, 41/2, 15/1 AND 19/1 MGSF, PROVN OF RAIN SHELTER FOR VERANDAH AND ALLIED WK NEAR BLDG NO 4 ATAL AND PROVN OF RAIN WATER SHELTER AT 15 THIMMAYA UNDER GE WEST LUCKNOW
2022_MES_536843_2
GE/W/LKO/42 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹84,300
Yes
1 Sept 2022
6 Aug 2022
22 Aug 2022
6 Aug 2022
20 Aug 2022
13 Aug 2022
6 Aug 2022 - 11 Aug 2022
Amount
Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M & L for Brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M & L for brick work with fly ash bricks (Old size) straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed. (Note :- WPC shall be measured and paid seperatelly)
M & L for 15 mm thick rendering cement plastering on fair faces of brick work or concrete surfaces 1:4 and finished even and smooth (without using extra cement). complete all as specified and directed.
Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.
M & L for 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L for 10 mm thick rendering in CM (1:3 ) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed.
M &L for Non skid ceramic coloured floor tiles shade as approved and size 300 x 300mm x 7mm thick set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match complete all as specified and directed
M & L for glazed ceramic colour tiles of size 300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including10mm thick backing coat in CM 1:4 complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean, washing down with water to remove dust etc including Brushing neat cement slurry with 3kg of cement per sq. metre complete all as specified and directed.
M & L for coloured vitrified ceramic tiles, light shade of size 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.
Ditto all as per item No-14 above but as in vertical surfaces as in dado/skirting with and including 10mm thick backing coat in CM 1:4 complete all as specified and direceted.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L 18-20mm thick granite stone slab, machine cut and polished in both side as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed.
M & L for 20mm thick granite stone slab as in cooking platform,window cill over 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and directed.
M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified and directed.
Demolition of RCC as in lintel, shelves etc nexc 15 cm thickness (below or above ground level) complete all as specified and directed.
M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast etc. with necessary form work complete all as specified and directed.
M & L for Mild steel TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.
M & L for cutting and chasing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth complete all as specified and directed.
Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S & F PVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints , fixed to walls complete all as specified and directed.
S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
S&F PVC bends 110 mm bore complete all as specified and directed
S & F PVC single TEE equal 110mm bore complete all as specified and directed.
S&F PVC bends 75 mm bore complete all as specified and directed
S & F in repair 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed.
Supply and fixed in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, PTMT waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed.
S & F in repairs vitreous china wash down water closet (pedestal pattern/EWC) pan with seat cover white with “P” or “S” trap including connection to drain or outgoing and to syphonage pipe complete all as specified and directed
S & F in repair Vitreous china squatting pan Orissa pattern 'long pan' size 580x440mm white with 'P' or 'S' trap, front or back inlet any pattern excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed.
S&F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with rebound spout with pop up waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed.
S&F in repair wall mixer with telephonic shower arrangement, connecting legs and wall flanges, fancy type, brass chromium plated, with swinging spout including plugging and securing to walls suitable for 15 mm bore pipe complete all as specified and directed.
S&F in repairs long body 15mm bore bib tap, quarter turn, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S & F in repair Angle valve, qtr turn cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.
S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union complete all as specified & directed.
S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified & directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified & directed.
S & F in repair hand shower (Health facut) with 1 M flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified & directed.
S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality complete all as specified & directed.
S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer complete all as specified & directed.
S & F in repair CP Brass Tubular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality complete all as specified & directed.
S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long complete all as specified & directed.
S & F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified & directed.
S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.
Supply and Fixing kitchen sink with drainage board, made out of 1mm thick stainless steel sheet with plug, washer, stainless steel waste coupling, PVC waste pipe including bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.
S & F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity, triple layered construction (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.
S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity, triple layered construction (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.
S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed.
S & F in repairs Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in repairs Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exc 1.50 Sqm and removing from site complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4 Sqm and removing from site complete all as specified and directed.
M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed. Note :- The hollow portion of frame shall be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and compacted properly before fixing the frame to opening, quoted rates shall deemed to include cost of same and nothing extra shall be paid for the same
M&L Pressed steel door frame of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed. Note :- The hollow portion of frame shall be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and compacted properly before fixing the frame to opening, quoted rates shall deemed to include cost of same and nothing extra shall be paid for the same
M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work all as spcefied and directed
S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.
S & F 30mm thick second class hard wood glazed and skeleton door shutters, open rebated and prepared to receive glass, gauge etc (devided into panels with plain sash bars any numbers) edges of framing plain, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I complete all as specified and directed.
Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and but both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. all as specified and directed.
S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by an ISO 9001/2015 certified company complete all as specified and directed.
S & F powder coated (minimum thickness of powder coating 50 micron) anodised Aluminium frame for doors, windows, ventilater with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.
S & F powder coated (minimum thickness of powder coating 50 micron) anodised Aluminium glazed window shutter top hung type, using aluminium section 65x38x1.25 to 1.5mm thick, including 4mm thick pin headed/tinted glass, screw, jointing cleats, rubber packing, Aluminium snap beading including 01 No Aluminium tower bolt 100mm long, 1 Nos Aluminium handle 100 mm long, 02 No 100 mm long Aluminium hinges B-21 type in each shutter etc complete all as specified and directed.
S & F powder coated (minimum thickness of powder coating 50 micron) anodised Aluminium window shutter top hung type using aluminium section 65x38x1.25 to 1.5mm thick including stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm, fixed with screw, jointing cleats, rubber packing, Aluminium snap beading including 01 No Aluminium tower bolt 100mm long, 01 Nos Aluminium handle 100 mm long, 02 No 100 mm long Aluminium hinges B-21 type of each shutter etc complete all as specified and directed.
S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar using Aluminium section 65x38x1.25 to 1.5mm thick including 4 mm thick pin headed/tinted glass, screw, jointing cleats, rubber packing, Aluminium snap beading, complete all as specified and directed.
Supply and Fixing powder coated (thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed/gauged window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips, rubber packing, Aluminium snap beading etc complete all as specified and directed.
S & F Aluminium Butt hinges, 100mm size complete all as specified and directed.
S & F 200mm long alumunium anodised barrel tower bolts of extruded section complete all as directed and directed.
S & F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.
S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.
S&F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed 140 MM Overall length of cover plate.
S & F Continuous (piano) hinges width of flange (when open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as spacified and directed.
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S&F magnet catcher heavy duty for cupboard shutter complete all as specified and directed.
S&F 8 to 10 mm dia anchor fastner of lentgh ecx 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine compete all as specified and directed at site. Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.
S&F in repair fancy type 25mm dia stainless steel curtain rods/Cupboard hanging rods including bracket/junctions /wall to wall and with rings of best quality complete all as specified and directed.
S&F 4.8 mm Sheet glass,ordinary quality in square of any size complete all as specified and directed.
S & F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm fixed with stanless steel staples or steel/wooden beadings to windows complete all as specified and directed.
S & F 300 mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed.
M & L for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M & L for complete removal of existing treatment of old surface of wall and and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M&L 1 mm thick Birla white putty on wall (two or more coats) complete all as specified and directed
M & L for preparation of new plastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, as per manufacturer's specification, complete all as specified and directed.
M & L for complete removal of existing treatment of old surface of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, complete all as specified and directed.
M & L preparation of new plaster surfaces and applying two coats of cement base paint over a coat of primer over newly plastered wall surfaces. complete all as specified and directed.
M & L for for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.
M & L for preparation of old treated ceiling surface and applying two coats of whitewash complete all as specified and directed.
M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed.
M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Demolition of Cement concrete (unreinforced) in ground floor and paving not exc 15cm thicknes below or above ground level complete all as specified directed
M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151, two parts of cement by weight complete all as specified and directed.
M & L for PCC 1:5:10, type E-2 using 40 mm graded stone aggregate as fondation filling and mass concrete in sunken floor etc. complete all as specified and directed.
M & L cement concrete type D-2, 1:4:8 (40mm grade stone aggregate as in foundations, filling and mass concrete ans sub base of floor etc. complete all as specified and directed.
M & L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in leveling course,padding of any thickness etc. complete all as specified and directed.
M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/coping etc.complete all as specified and directed.
M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as psecified.
M & L for 10mm thick rendering on fair faces of brickwork or concrete surface in CM (1:3 ) including finished even and smooth (without using extra lime or cement) using 100% coarse sand on roof surface including WPC as per manufacturer's instructions complete all as specified and directed.
M & L for provision of roof treatment with polymeric water proofing membrane as specified here under :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.40 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of aluminium paint @ 0.10 litre/Sqm (each coat) on membrane surface all as specified and directed. Note:- (i) PCC padding or rendering for leveling of undulations on roof shall be measured and paid separately (ii) For filling undulation or levelling either PCC or rendering shall only be allowed for payment purpose.
Cutting holes in brick walls built in cement mortar or cement lime mortar to a depth measured from the face of jamb exceeding half brick but not exceeding one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required for fixing purlins,rafters etc.complete all as specified and directed.
S & F steel tubular section Fe-290 (Gde E-165) as in beams ,rafters,purlins and running rails and guide for sliding doors fixed with MS cleats or other connecting plates including cutting, grinding, welding etc as required complete all as specified and directed.
S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for cleaning the exposed concrete surface of floor/ wall/ chajja by brushing & watering and applying one coat of TAPECRETE P-151 Acrylic Polymer Modified Cementitious slurry consisting 1:2 (1 part of tapecrete : 2 parts of cement by weight) and shall be allowed to dry for 4-6 hours, then applying second coat of 1.5mm thick tapecrete brush topping consisting 1:2:2 (1 part of tapecrete : 2 parts of cement : 2 parts of silica sand by weight) over the first coat and cured for next 2 days complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).Complete all as specified and directed.
Providing post ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth, for foundation, etc. or for shaft, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out soft/loose soil complete complete all as specified and directed.
M & L hardcore of broken bricks gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface. Complete all as specified and directed
M & L single filling in floor or pavings, laid in layers not exc 15 cm thick, spread, levelled, and blinded with earth and rammed including watering . Complete all as specified and directed
M & L spreading and levelling in layers in exc 25 cm thick well ramming inluding watering as required (Item used obtained from excavation). Complete all as specified and directed
M & L for providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc, including welding ,grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing th railing with necessary accessories & stainless steel dash fasteners, stainless stell bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement. Complete all as specified and directed
Surface Excavation not exc 30 cm deep and overaging 7.5 cm deep as I n soft/loose soil complete all as specified and directed
Exacavation in post holes in (or similar holes) each not exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm thick and removal of suplus soil complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete. Complete all as specified and directed.
S&F for MS steel work as in rectangular purlins, rafters and similar item complete including cutting, grinding, welding etc as required quality conforming to (F290 Gde E165) complete all as specified and directed.
S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hood and hinges or steel hanging door fittings etc with welded riveted or bolted of Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. Complete all as specified and directed.
M&L for sand filling under floors as in cushoning for interlocking paver blocks complete all as specified and directed.
M&L for factory made machine pressed precast 80mm thick PCC inter locking paver block M-40 grade of any shape and size confirming to IS-15658-2006 as in hard standing with grey cement and pigment complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in haunching, kerb/fillets including necessary excavation earth work. Complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per item no 129 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item no 129 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per item no 129 above but for one Call bell / buzzer point controlled by one bell push
All as per item no 129 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.
S&F bell push single pole one way 5 Amp 230 volts complete all as specified and directed.
S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.
S&F Call bell (Ding dong) AC single pole 230 Volts complete all as specified and as directed at site.
S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed at site.
S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Supply & fix modular type AC power unit with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified & directed.
S&F 7/9 watt LED Lamp any type as required complete all as specified and as directed
M&L for two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
M&L for two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells cat no LUMILINE+BS20WLED865SPCSS/ Bajaj LED batten BCLAB 20W WH LED P
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 10/7W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code:WT140W LED7S NW PSU S1 PC./ Havells cat part no. RUGBYGENXFTS10WLED865SSYMBOPC /Bajaj wee plus cat No BIBWP 6W LED
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite BN 021 LED 12S 6500/4000 PSU GR/SI /Havells cat no LUMILINE+BS10WLED865SPCSS/ Orient Taskline AI LBLN-12-C-AL
S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories , as specified and directed by Engr-in-charge. Make philips Green line smart cat no BRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt cat part No ENXT P 24L WH CR PC SD/Havells Endura Sundown with cat part No ENDURASUNDOWNSL25WLED765PASYBOPCIHD
S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or / Havells decorative model Floretine WL 1LS B22 SS PPCP cat no LHFOAJE1TN1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)/Jaquar lighting
Taking down carefully ceiling fan/exhaust fan of any capacity from any position by disconnecting all connection and removing from site and deposited in MES store yard of AGE EM West complete all as specified and directed.
Taking down carefully electric meter of any capacity from wall or any position by disconnecting all connection and refixing the same including all electric connection and acessories as required including new wooden board of suitable size complete all as specified and directed.
Taking down carefully water storage heater of any capacity from wall or any position by disconnecting all connection and refixing the same including all electric connection and acessories as required complete all as specified and directed.
S&F ceiling fan 1400mm sweep, BEE star rated (40-48 W), Min air delivery 215 CFM, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells ES 40/Bajaj Edge HS (Opal white)/Anchor Power
S & F exhaust fan single phase, 230/240 Volt heavy duty metalic body of size 300 mm sweep with suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed by Engr-in-charge. Make:- Bajaj (Heavy duty)/ Havells (Turbo force)/RR Kabel (Heavy duty) RR-LDEX300 NOTE:- Old exhaust fan shall be deposited in AGE E/M yard
S & F in exhaust fan made of sturdy engineering plastic body complete with louvers shutter, single phase, 230/240 Volt of size 250 mm sweep and making connection with PVC insulated and sheathed three core copper flexible cable 23/0.076mm after cutting opening in 230/460mm thick brick wall built in cement mortar and making good the surface with cement mortar 1 :3 including necessary frame etc all as specified and directed by Engr-in-charge.
M/S Reliance Construction
M/S S S A ASSOCIATES
M/S SWATI CONSTRUCTION
M/S SHIVA CONSTRUCTION
Spectrum Enterprises
M/S S&R Construction
m/s durgesh traders & constractions
EVEREST CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .