Repair to open drain, steel gate, boundary wall and chain link fencing at certain unit and Md Accn under AGE B/R-III at GE Gurdaspur.

Amount

Demolition of cement concrete in ground floor & paving n.exc 15cm below/ above ground level and of any description and in any position not otherwise specifically provided for.

Demolition of brick/ stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stone work and precast concrete articles all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in built cement morter 1:4 all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping, lintel bands, strings coarses etc slightly rounded, chamferred angles and throating etc complete all as specified.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channel, drain and similar work complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type C-2 (using 40mm graded crushed stone aggregate) as in cement concrete in path, hardstanding, floors and paving, sub base etc finished even and rough complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type C-2 (using 40mm graded crushed stone aggregate) as in cement concrete in path, hardstanding, floors and paving etc finished even and rough and providing joints throughout filled with mastic filling comprising one part of bituman 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L for hardcore broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for extra for forming fair finished in drains or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick or stone walls any description including raking out joint, hacking for key, scrubbing down with water etc removing the rubbish off the premises to a distance not exc 50 mtr away complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair face of brick work or concrete surface in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.

Demolition and breaking up 150 mm drain pipes (SGSW/ AC/reinforced concrete) set in cement mortar complete all as directed by Engineer-in-Charge.

S&F RCC drain pipes NP2, laid and jointed with collars 150mm dia all as specified and directed.

M&L for concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Srl item No 17 above but 5mm dia and over upto and includidng 10mm dia as in stirrups, spacers and binders complete all as specifed and directed.

M&L for preparation of newly plastered or concrete surfaces and applying two coats of colour wash over a coat of white was complete all as specified and directed.

M&L for preparing new steel or iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint including a coat of red oxide primer all as specified and directed.

S&F mild steel work of angle iron (ordinary quality Fe-310) as in fencing post and struts including cutting top to shape as directed. Drilling holes for nut and bolts etc including flat iron fillets for securing wire mesh staying the post in a true vertical position and providing preservative treatment to the portion of the complete all as specified and directed.

S&F galvanised mild steel plain wire 4mm dia including staining and fixing to any type of post , securing or tying at crossing etc complete all as specified and directed.

M&L for ceramic glazed dark shade coloured tiles of size 450 x 450 x 10mm thick joint free set, jointed and pointed in neat cement slurry in floors with coloured cement and pigment to match the colour of the tiles includidng dismantling of old tiles complete all as specified and directed.

Dismantling stone slabe and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for glossy finish coloured chequered cement concrete tiles with grey cement and pigment, 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 including demolition existing tiles and screed complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for 60mm thickness M-35 grade (in red/ yellow colour with required shape) with grey cement and pigment of machine pressed precast concrete interlocking paver block of shape/ size as conforming to IS 15658 - 2006 as in roads beams complete all as specified and directed.

Cleaning with Nano bio wash the existing surface of concrete and reinforcements by wire brush including scrapping and cleaning with emery paper or by air blasting or sand blasting incl foreign matrials, loose concrete/ aggregate etc and washing down with water as required complete all as specified and directed.

M&L for crack repairing : openthe crack, applying Nano shorter chain, high penetration flexible, water resistance base (2) active part (1) : Nano 611% flexible powder (3), complete all as specified and directed.

Providing and applying Nano water base elastomeric finish two coats over one coat of Nano water base elastomeric primer not containing toxic materials like Pb, Cr, Zn, biocides/ organocides having defect free nano particles with inhibiting characteristic having bacteria killing rate above 40% and high anti-fungal properties with supper hydrophobic properties with contact angle of water more than 750 with elongation (stretch ability) of more than 300% in a nano- structured self assembled dispersion system with VOC level of less than 1%, 40 micron DFGT of top coat including scaffolding, surface preparation, cleaning etc complete as per specified and as directed by Engineer-in-Charge.

M&L for 25mm thick of sand layer under interlocking paver block complete all as specified and directed.

Dismantling structural steel work including door, gate etc complete all as specified and directed.

S&F MS framed work as in doors or gates of angle or other section complete drilled for fixing of steel sheeting or other covering doors ect (exclusive of steel sheeting) also fastened confirming to Fe 410-W (Gde-E-250) quality-A and fixed complete all as specified and directed.

S&F mild steel 1.00mm thick sheet, plain in steel gates and similar work, cut to size, welded seams etc complete all as specified and directed.

M&L for precast slabs made of PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manhole etc) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces set in CM 1:4 including demolition of old slabs complete all as specified and directed.

Dismantling posts or struts (RCC) any section including taking out embedded portion and making good disturbed ground, embedded in natural ground, complete all as specified and directed.

M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface all as directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation complete all as specified and directed.

Supply only 3.15 mm dia PVC coated galvanized steel wire chain link fencing 75 mm x 75 mm mesh fixed with string bolts complete all as specified and directed.

Fixing only chain link fencing 75 mm x 75 mm mesh, fixed to angle iron fencing post with bolts etc including fixing with binding wire / line wire etc complete all as specified and directed.

S&F mild steel round bars 10 mm dia (Fe 290, grade E-165) cut to length, bend to shape required and hooking ends for fixing to chain link fencing complete all as specified and directed.

S&F mild steel flat iron fixed to fencing post including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing barbed wire etc) and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or both ends, each screw end to be fitted with washers and one hexagonal or square nut, diameter of bolts 16 mm, length of bolt exc 5cm not exc 10cm long, complete all as specified and as directed.

M&L for preparation of newly steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F of Rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc. complete all as specified and directed by Engr-In-Charge.

M&L for plates Fe-410-W (Gde-E-250) quality-A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed.

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 84,995- Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

s.v and co (BID ID -3463637)