SPECIAL REPAIR TO BLDG NO. T-210 OF INI AT CME

Amount

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises

M&L 75mm thick cement concrete type D2 1:4:8 (40mm graded stone aggt) as in sub base complete all as specified and as directed.

Demolition of cement concrete(unreinforced ) in ground floors and pavings not exceeding 15cm thickness(below ;or above ground level) all as specified and directed.

M&L cement concrete 1:3:6 type C-2(40mm graded aggregate) as in floors plinth , path etc 75mm thick smoth finikshed surface without using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in ;subbase 75mm thick all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L non skid coloured ceramic tiles (Square/rectangular) area of each tile area exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM(1:6) complete all as spd & as directed.

M&L glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm size on vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match to tiles including provision of rendering 10 mm thick in CM(1:4) complete all as specified and as directed.

S&F for under counter wash hand basin coloured complete with CP waste coupling and waste pipes & PVC connections (Make - Hindware Cat No. 10065)

S&F in repair pillar tap fancy type (Make- Jaquar, Code No. DRC-37001 complete all as specified.

S&F in repair angle cock (Make- Cera Cat No-1008201)

S & F CP Urinal spreader of any colour for fixing with 15mm dia pipe with back inlet 75mm tail SLA Make : Jaquar :ALD CHR 1041)

M&L for 15mm Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed

M&L for CP brass health faucet (jet spray) fixed along with PVC flexible connection and wall hook (Make - Jaquar Cat No. 563)

S&F toilet paper roll holder with flap of make Jaquar Code No. ACN-1153 N.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm

S&F CP brass single towel rail 600mm long of make Jaquar Code No. CAN-1111 NM.

M&L for CP brass bib tap 15mm bore with wall flange (make - Jaquar Code No. CON - 047KN)

M&L for CP brass two way angle cock with wall flange of 15mm dia capastan head (make - Jaquar)

S&F soap dispenser with glass bottle of make Jaquar code No. ACN - 1135.

M&L for vitreous china half stall ceramic urinals white of size 720x485x310mm, including grating and waste pipe.

S&F tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 15mm bore incl taking down old pipes complete all as specified.

Refixing 15mm dia old steel tubing and connections in new or old position as in walls, floor etc complete all as specified.

Supply and fix 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified.

Supply and fix 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified.

Taking down chowkats or frames with shutter(without taking off shutters from the frames) not exc 1.5 sqm each and removing from sitecomplete all as sepcifed and directed.

All as per item No 29 above but exc 1.5 sqm and n.exc 4 sqm complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc all as specified and as directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S&F 100mm size type B21 butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin

S&F 150 mm size extruded aluminium alloy handles, fabricated type anodized.

S&F 125 mm long aluminium anodized barrel tower bolts of extruded section.

Cutting chase, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chasesfor concealed water tubing and making good,cutting n.exc. 10cm girth in brick/stone walls all as directed.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water all as specified and directed.

M&L 15mm thick cement plastering on concrete surfaces in CM (1:4) finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat primer on walls complete all as specified and directed.

M&L complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coat of Oil Bond distermper white or tinned over one coat of primer on walls, etc all as specified and directed.

Excavation in post holes (or similar hole) each n.exc 0.50 cu m getting out in hard/dense soil complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete in post hole complete all as specified & directed.

S & F mild steel work with hollow sections as in posts, roof trusses(framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing including distance pieces.cleats etc conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.

S&F of Fe 410-W(Gde-E-250) quality - B mild steel plates, plain or chequered , 5mm thick or over in thickness in available sizes complete all as specified & directed.

Preparation new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coat of red oxide primer complete all as specified and directed

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensilestrength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified and directed.

Cleaning and desilting of existing drains channel including removing shrubs, vegitation from drain ,channel of any size & depth all as directed by EIC.

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved.

S&F wall hung EWC size 565x350x350mm Ivory colour Make Cera, Cat No S1043119 (P Trap)

S&F twin flush concealed cistern Cera Siamp (without knob frame) Cat No B1110108

S&F globe knob shine finish for flushing cisterns Cat No B1120119

S&F Full frame for concealed cistern Cera Siamp Cat No B1130105

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc complete

S&F for aluminum anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using sections as given in 'JINDAL' catlogue.

S&F aluminium anodised door with frame and shutters, made out of extruded anodised extruded aluminum section conforming and as specified in IS-737, fixed with and including anodised aluminium butt hinges, tower bolt, glazing clips and locking arrangements, snap beading, handles and 5 mm thick plain sheet glass and connected items, with and including making good to the disturbed portion with its original specifications fixed as in repairs, complete all as specified and directed. (Note :- Minimum thickness of anodizing shall be 25 micron.)

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

M&L for point wiring with 1.5 Sq mm single core multi-stranded copper conductor PVC (FRLSH) insulated, unsheathed cable 1100 volt grade in PVC casing capping 25 mm wide (ISI marked with accessories fixed to surface of wall/ceiling with PVC sleeves as per relevent IS including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for :-

(a) One light/Exhaust fan point controlled by one, one way switch.

(b) One socket outlet 3 pin 6 Amp on same board.

All as per item No.58 above, but with 4 Sqmm (56/0.30mm) PVC copper multistranded cable FRLSH type for one 16 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FR type copper multistranded conductor as earth wire all as specified & connected to common earth & earth terminals including PVC/wooden folding boards for mounting purposes.

S&F switch piano flush button single pole one way 6 Amp (ISI marked) complete.

S&F socket outlet, flush type, 5 pin 6 Amp multi-purpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 6 Amp plug top white/ivory finish.

S&F switch socket combination, flush type, 6 pin 16 Amp suitable for 3 pin 16Amp and 3 pin 6 Amps plug tops, multipurpose, white/ivory finish.

Supply & fix ceiling rose, surface Bakelite, 65x50mm, two to three terminals.(ISI marked)

S&F lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fiitng.

Supply & fix following type/rating MCB’s including necessary connection as under:-

(a) MCB 10KA 6 Amp to 32 Amp 'C 'curve single pole AC 240 Volts.

(b) MCB 10 KA 10 Amp single pole & Neutral AC 240 Volts.

Supply and fix Sleek LED 7 W mirror light provided with high output diffuser & frame 2 ft in length of Make: Crompton Cat part No LCL-07- CDL or equivalent in Havells / Philips.

Supply and fix LED light fitting Recess mounting full openable 2x2 tile Glaire free uniform illumination with longer life and less maintenance Polaris I 50 Watt 5700 K ,LED Clean room, diffused Make : Crompton Cat part No : LCTLRN-50-FO-CDL or equivalent in approved make all as specified and directed by E-I-C.

Supply ind fix Energy saving new generation 10 Watt 6000 k LED, Type SUNRISE, Confirmed to IP 65 Bulk head luminaire with opal diffuser Make Crompton, Cat part No : LBH-10-CDL or equivalent in approved make all as specified and directed by E-I-C.

Supply & fix factory made sheet metal enclosure distribution board class IP-43 with 200Amp rated copper bus bar 240 Volts 4 way single pole and neutral link, double door link complete all as directed by Engineer-in-Charge.

M&L for sub main wiring with two runs of single core FRLSH PVC insulated, unsheathed, copper conductor, multi-stranded cable of size 4 Sq mm, 1100 volts grade drawn through 25 mm wide PVC casing capping including one run of 2.5 Sq mm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of cable and one run of earth wire shall be measured as one unit length.

Providing exhaust fans AC single phase with lourves 230 Volt heavy duty of size 300 mm sweep, RPM 1400 .incl fixing complete all as directed by Engr- in -Charge

Mukund Engineers and Contractors

Chandrama Construction