BIRED/24/e-NIQ (1st call) of 2022-2023

Amount

PART-A---ELECTRICAL INSTALLATION WORK Supply of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make- Havells/RR /Universal/ Polycab/ As per choice of EIC) i- 4 Core 300 Sq. mm [ NS ]

ii-4 Core 240 Sq. mm [ NS ]

iii-4 Core 35 Sq. mm [ NS ]

iv-2 core 10 Sqmm [ NS ]

Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand. [4-b/F-3] (4 core 300 Sq mm-440 mtr)

Laying of two cables above 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. [ 2c / F-2].(4 core 300 sqmm-180 mtr,4 core 240 sq mm-200 mtr).

Laying of one cable upto 150 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand. [4-a/F-3] (4 core 35 sq mm)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(1-a/F-2).(4 core 35 sq mm-610 mtr,2 core 10 sq mm-60 mtr)

Labour Charges for boring through any type of soil for passing 2 No 150 mm dia GI pipe(TATA/JINDAL) under the CC/Black top road passing for different size of cable Horizontally before cutting soil to side of roads of 2 mtr depth incl. all necy. works for easy access of passing cables. [NS]

Labour Charges for cutting hard metal jhama [NS]

Supplying and fixing compression type gland and finishing those for following XLPE armoured cable ( 4 )Core as per GS. i)4 Core 300 Sq. mm [7(d)/F4 & 8(b) /F5 ]

ii-4 Core 240 Sq. mm [7(d)/F4 & 8(b) /F5 ]

iii-4 Core 35 Sq. mm [7(d)/F4 & 8(b) /F5 ]

iv-2 core 10 Sqmm [7(d)/F4 & 8(b) /F5 ]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 9.1)150 mm dia- [11(i)/F-6]

Supply,Febrication and installation of out door type LT Cubical Sub Distribution Panel Box of suitable Size made of 5 mm thick M.S. sheet and bottom portion with 10mm thick MS plate rigidly fixed by nuts bolts washers and 50 mm. x 50 mm. x 7 mm angel frame duly welded having suitable nos. of cable entry including cable allay with two part door ( made of 5 mm. M S . Sheet ) including allan key type locking and extra pad locking arrangement including supply and fixing 1no 7 lever Godrej lock with triplicate keys at both ends incl. making necessary interconnections with suitable length and gauge of copper bar having making hole in both ends with main switches , BBCs and other components, including wall mounting arrangement with suitable nuts bolts washers which ensure that rigidly fixed with the wall. The piller box should be painted with dry powder paint (By Seven tank Process). A) Incoming- 500V, 630 A, L&T make TPN SFU (Open Execution Type) with 3nons 630 A HRC fuse ---- 01 set B) Outgoing- 500V, 630 A, L&T make TPN SFU (Open Execution type) with 3nons 630 A HRC fuse ---- 01 set (C) Three phase LTCT Energy meter (Make-L&T , model no-ER300P)--01 Set. (D) Interconnected copper bar of 500 volt and 700 Amp current carrying capacity in between two SFU mention above. (E) Current transformer of rating 630/5A Kappa make--- 03 set (F)) 20 Amp. Bakelite fuses base & bridge with 4 Amp. HRC fuse link .(Standard make)--03 set G) R,Y,B LED indicating lamp (L&T)-- 1 set H) S&F Danger board--- 01 no

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS. i)For Morum Soi [1(b)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS. (For feeder pilar earthing-2 and for Mechnize Laundry dedicated earthing- 2). [ 2(a)/G-1]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on as per GS. [4(c)/G-2 ].(For feeder pilar earthing-1 and for Mechnize Laundry dedicated earthing- 1)

Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised (Hot Dip) MS flat as per GS. [5(d)/G-3 ]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.( Earthing pit for Feeder pilar-2 no, and for Mechnize Laundry dedicated earthing- 2 nos) [G-2/3-a]

Labour charges for 35 nos of LT cables reoientation after removing from underground trench and put into the masonary tranch in well manner. [N.S].(Approx -595 mts of cable)(Approx Skill labour required-16 nos and unskilled labour required--16 nos)

Sub Head-1----Pole and Foundation Supply and delivery of 12 Mtr long swagged type steel tubular poles and its cross arm bracket made of M.S. E.R.W pipes and manufactured as per IS 2713 (Part II) 1980 and IS : 1239 with the latest amendments. The designed specification of the pole will be as per 410 - SP - 60 (208 Kg) (Make- Calcutta Pole, Tensil/ Utkarsh) [K-21]

Erection of Single Steel tubular pole of length as given below with sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhamametal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finishand GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properl above 9.0 mtr. Size 0.6x0.6x1.91 mts [ 1(b) / H-1 ]

S & F of round bracket 1.5 mtr X 48 mm dia hollow circular for 6 nos. flood light fittings special type fixing arrangement on fixed pole with 3 nos cross arm of size of 477 mm long incl. sleeve size 450mm long and 100 mm dia incl painting. (N.S)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: [G-1/2-a] (a) ISI Medium GI pipe. [For pole earthing]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [G-2/5-II] No-6 SWG

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.[F-6/11-C]. (a) 40 mm dia. (ISI-M)

Excavation of soil for installation of Earth Electrode and filling & ramming. 25.1)(a) For Soft Soil.[G-1/1-a]

(b) For Morrum Soil.[G-1/1-b]

Dismantling of steel tubular pole embeded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6KM. [I-2/14]

Supply, Delivery of 7 Mtr GI Octagonal Pole including foundation accessories(having Bolts M24x750 -"J" TYPE- 4nos.) & Template having Top Dia- 70mm, Bottom Dia- 135mm Base plate dimension- 225 mm X225mm X 16 mm and sheet thickness-3mm, PCD-200mm. (Make-Tensil/Utkarsh/Calcutta pole)

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (Upto 9.0 mtr. long pole).(H-2/4-a).(i) 1st coat of aluminium paint over 1 coat of RO priming

(ii) 2nd coat of aluminium paint over 1st coat

Above 9.0 mtr long pole.(i) 1st coat of aluminium paint over 1 coat of RO priming

(ii) 2nd coat of aluminium paint over 1st coat

Design, drawing & civil foundation(Size: 1.5mtrx0.6mtrx0.6mtr) work and erection of 7 mtr. long GI octagonal pole by earth work in excavation of foundation trench approx 1.65mtrx0.7mtrx0.7mtr) including removing of spoils and necessary trimming the side of trench levelling dressing and after that picket jhama brick soling and dressing bed levelling and filling joints & PCC after that tor rod proper size, stirrups, binders etc and vertically M.S Tor Rod suitable dia complete with binding with black annealed wire, shuttering and concrete including fixing of pole foundation bolts( with graded stone chips 20mm as IS proportion(1:2:4) complete and water rigidity next seven days.i) for 7 mtr.long GI octagonal pole

Providing CC (6:3:1) muffing 0.3 mtr dia upto the height of 0.3 mtr. above the ground level around the pole base complete with 3 mm thick neatly finished cement plaster all-round after dismantling the unserviceable muffing if necessary.[I-1/11]

S & F GI water proofing type looping cable box size 250 X 200X 100 mm deep having 4 mm thick comprising of one 250 volt,15 Amp kit-kat fuse unit, One NL on porcelain insulator, one compression type brass cable gland for upto 3 core 1.5 Sq mm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc, earthing terminal with lug, on steel tubular pole near base, including supply and fixing 40 X 6mm thick, MS clamps with bolts, nuts etc, including painting with anti corrosive paint. (NS)

Supply and fixing of (250 X 200X 105)mm polycarbonet loop box(Make- Sintex) fixed on existing pole by 2 nos GI Band and Screw,nut and bolts, which contais 16 Amp porceline fuse,1 nos 4 way terminal making all connection complete with proper locking arrangemant and mending good the damages.

Dismantling of OH line comprising of copper/AAC/ACSRconductor, cross arms / ‘D’ iron clamps / brackets / ‘V’ brackets etc. insulators, earthwire, cradle guard, safety devices, staywireetc., incl. sorting out, rolling the conductors, stacking, loading atsite and delivering, unloading , measuring the conductors,sorting, stacking properly at any place as per direction upto alead of 1.6 km.[ I-2/15-b] i)OH line comprising of 3 phase, neutral, street light phase & earth wire having span 35 Mtr.

Supply, Delivery & Fixing of arm bracket 1500 mm long with 48.8 OD GI Pipe suitable for octagonal pole having outside dia.upto 115mm including S & F GI nuts, bolts, washers etc.as required and making necessary holes as required as directed by EIC. [N.S]) i) 1.5m Single arm bracket.

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.[ H-5/H-4]

Removing of luminaries with lamps from the pole/column and keeping them ready for despatch as per direction of EIC.[ KMDA Sch 45/11.5 -a]

Supply and delivery of 240 volt,90 watt IP 66 protection LED street light which consist-110 lumen/watt and pressure die cast alluminium housing.(Make-Crompton.(Model No- LSTP-90-CDL-HPM) or philips or havells)

Supply and delivery of 240 volt,100 watt IP 66 protection LED flood light which consist-110 lumen/watt and heat sink.(Make-Crompton.(Model No- LHB11-100-CDL/60-M) or philips or havells)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (RR/Polycab/Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.[E-9/1-a] (a) 2 X 1.5 Sq mm

CIVIL PART Dismantling all types of plain cement concreteworks, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75m (c) Extra rate for each addl floor over the rate ofground floor(10/It-3)

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities notexceeding 15 cm depth and disposal of the rubbishwithin a lead upto 75 m as directed(1/It-1)

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete (a) Depth of excavation not exceeding 1,500 mm.(1/It-2)

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity (B) Do - by fine sand.(2/It-4)

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.(47/It-3)

(I) Cement concrete with graded stone ballast (40 mm size excludingshuttering)In ground floor(A) [Pakur Variety(a) 1:3:6 proportion.(34/It-22)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety(26/It-10)

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL . b)Add extra over the rate of ground floor/initial 4 m for each basement floorand each additional floor below/ above ground floor. (43/It-40)

Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor. Add extra for basement and each additional floor over the rate for ground floor (Rs 111.00/-)(15/It-8)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster P-193/It-1 Extra for each additional floor over the rate for ground floor(i) External plaster (a) Upto 4th floor (GF +Rs 4.00/- Each Floor)(189/It-1)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.(190/It-15)

MOON LIGHT

RIK ENTERPRISE