Loading…
Loading…
Tender Value
Refer Docs
Closing Date
13 Nov 2023, 12:00 pmClosed
ATESH FAUJDAR
Ajmer LPG Plant, Bharat Petroleum Corporation Limited
Successful Bidder has to furnish the job as per scope of work within the stipulated time as will define into LOI during the issuance, else LD as per terms & conditions will be applicable
14243
1000411328
Limited Tender
Works
Ajmer LPG Plant
18 Nov 2023
29 Oct 2023
13 Nov 2023
29 Oct 2023
13 Nov 2023
29 Oct 2023
29 Oct 2023 - 11 Nov 2023
Bill of Quantities (BOQ)
Sr. Description of Job UOM QTY RATE/UNIT TOTAL
1 Dismantling ofexisting M2
old/deteriorated plaster, raking out
joints and cleaning the surface with
wire brush including disposal of
rubbish outside the premises to an
unobjectionable place.
2 Providing Cement Plaster Finished M2
Including Cleaning, Hacking of Base
Surfaces, Scaffolding, Curing,
Finishing etc. All Complete for All
Heights as Per Specifications.
Cement should be of standard
quality like – Ultratech, Ambuja, ACC
3 Preparation of surface, Curing, M2
cleaning the site by floating coat of
neat cement or fine sand.
4 Providing and laying integral M2
cement-based water proofing
treatment for terraces including
preparation of surface as required
for treatment of roofs, balconies,
5 Putty / POP work on building walls. M2
6 Building Painting work including M2
paint and others material like
thinner, brushes etc. paint should be
of standard brand like- Berger,
Asian, Nerolac etc.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
14243.zip
zip • 0.75 MB
BUDGETDOC_14243.pdf
pdf • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .