REPAIR TO WOODEN AND STEEL FURNITURE POLISHING AND RECANNING INCL MISC SERVICES AT DIAT AND MILIT GIRINAGAR PUNE AND DIGHI

Amount

GIRINAGAR CHAIR DINING : Removing unserviceable part of timber carefully from existing position and replacement of timber parts made of teak wood (Ist class) all as specified and shown in drawing for the following items of furniture. (i) Front legs as shown on drawing.

(ii) Rear legs as shown on drawing.

(iii) Front rails shown on drawing.

(iv) Rear rails shown on drawing.

(v) Side rails shown on drawing.

(vi) Bottom stiffeners as shown on drawing.

vii) Canning patti shown on drawing.

CHAIR EASY :(i) Legs as shown on drawing.

(ii) Arms as shown on drawing.

(iii) Seat side rails as shown on drawing.

(iv) Seat front rails as shown on drawing.

(v) Seat rear rails as shown on drawing.

(vi) Back rest as shown on drawing.

vii) Canning patti shown on drawing.

CHAIR WRITING : (i) Front legs as shown on drawing.

(ii) Rear legs as shown on drawing.

(iii) Front rails as shown on drawing.

(iv) Rear rails as shown on drawing.

(v) Side rails as shown on drawing.

(vi) Stiffeners as shown on drawing.

(vii) Arms as shown on drawing.

(viii) Back supports as shown on drawing.

vii) Canning patti shown on drawing.

REPAIRS TO HAT STAND (i) Replacement of old defaced mirror S & F new mirror as per drgs.

(ii) Replacement of broken hooks and S&F hooks as per drgs.

(iii) Replacement of old back side as per drgs.

REPAIRS TO STOOL DRESSING LADIES :-(i) Replacing of old unserviceable long rails.

(ii) Replacing of old unserviceable side rails.

(iii) Replacing of old unserviceable legs.

TABLE BED SIDE (i) Top of table bed side 12mm thick plywood with synmaica including 4mm thick Ist class Teak Wood beeding of edge as shown in drawings

(ii) Side planks with 12mm plywood with synmaica

(iii) Bottom planks with 12mm plywood

(iv) 6mm commercial plywood of size as shown drawings

(v) Repair and replace old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed.

(vi) Repair and replace old unserviceable legs with existing size and all as specified and directed by Engr-in-charge

TABLE CENTER (i) Top of table center 18mm thick pre laminated particle board including 4mm thick Ist class HW beeding of edge

(ii) Legs of 1st class Teak wood

(iii) Long rail of 1st class Teak wood

(iv) Short rail of 1st class Teak wood

TEAPOY :- (i) Top of Teapoy 18mm thick pre laminated particle board incl 6mm thick 1st class hard wood teak wood beeding of edge including french polish

(ii) Short rail of 1st class hard wood teak wood including french polish.

(iii) Long rail of 1st class hard wood teak wood including french polish.

(iv) Stiffener short rail of 1st class hard wood teak wood including french polish

(v) Leg of 1st class hard wood teak wood including french polish

TABLE PEG :-(i) Top of Peg table with 18mm thick pre laminated particle board incl 4mm thick 1st class hard wood teak wood beeding of edge including french polishing.

(ii) Long rail of 1st class hard wood teak wood including french polishing.

(iii) Short rail of 1st class hard wood teak wood including french polishing

(iv) Leg of 1st class teak wood including french polishing

TABLE DRESSING LADIES :- (i) 5mm thick mirror including plywood all as specified and shown on drawing.

(ii) Drawers all as shown on drawing

(iii) Legs/stiffeners all as shown on drawing

(iv) Top all as shown on drawing

(v) Back all as shown on drawing

(vi) Bottom all as shown on drawing.

(vii) S&F new Knobs for drawers.

(viii) Mirror frame all as shown on drawing.

TABLE DRESSING GENTS (i) 5mm thick mirror including plywood all as specified and shown on drawing.

(ii) Drawers all as shown on drawing

(iii) Top all as shown on drawing

(iv) Back all as shown on drawing

(v) Bottom all as shown on drawing.

(vi) Side all as shown on drawing.

(vii) S&F new Knobs for drawers.

(viii) Mirror frame all as shown on drawing.

TABLE WRITING (i) Replacement of old unserviceable top with new top made out of both side prelaminated particle board one side teak face and other side white face 18 mm thick with 4 mm teak wood beeding all as per drgs.

(ii) Replacement of old unserviceable legs with new legs made out of 1st class teak wood as per drgs.

(iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs.

(iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs.

(v) Replacement of old unserviceable drawers with new drawers as per drgs.

(vi) Replacement of old shutters of cupboards with new shutters as per drgs.

(vii) Replacement of old side portion of cupboards with new side portions as per drgs.

(viii) Replacement of old back portion of cupboards with new back portions as per drgs.

(ix) Replacement of old long stiffner with new long stiffner as per drgs.

(x) Replacement of old short stiffner with new short stiffner as per drgs.

Sofa 4 Seater (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer.

(ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed.

(iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed

(iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed.

(v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed.

Sofa Single Seater (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer.

(ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed.

(iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed

(iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed.

(v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed.

Sofa 5 Seater (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer.

(ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed.

(iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed

(iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed.

(v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed.

(p) Repairs to table dining 6 persons, (i) Removing unserviceable table top and S&F new table top, of size 1500x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed.

(ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed.

(iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed.

(q) Repairs to table dining 8 persons (i) Removing unserviceable table top and S&F new table top, of size 1800x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed.

(ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed.

(iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed.

(r) Bed hard: (i) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of head board with 4 mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed.

(ii) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of foot rest with 4mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed.

(iii) Removing broken long rail from the bed hard and S&F new Second class hardwood long rail of size 1980x90x35 mm as per existing pattern with French polish complete all as specified and as directed.

(iv) Removing broken short rail from the bed hard and S&F for new Second class hardwood long rail of size 900x90x35 mm as per existing pattern and French polished complete all as specified and as directed.

(v) Removing broken legs and S&F for new legs of Second class hardwood of size 600x600x40 mm as per existing pattern and French polished complete all as specified and as directed.

(vi) Removing broken unserviceable head board and S&F new head board as per drawing and French polished complete all as specified and as directed.

(vii) Removing broken unserviceable foot rest and S&F new foot rest as per drawing and French polished complete all as specified and as directed.

(viii) Removing the unserviceable plywood top and S&F with new top of size 1900x850x12 mm commercial plywood ISI marked complete all as specified and as directed.

(ix) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed.

(s) Side board: (i) Replacement of doors with 18 mm pre-laminated particle board interior grade one side with natural teak wood veneer including butt hinges and knobs complete.

(ii) Drawer for table replaced with pre-laminated particle board on one side 18 mm thick with teak wood edging 4 mm thick all as directed.

(iii) Bottom of drawer made out of 6 mm thick plywood commercial and fitted in drawer frame

(iv) Side rail of drawer made out of 1st class hardwood (teak)

(v) Knobs chromium plated 35 mm with bolt and nut

(vi) Back of side board with 6 mm thick plywood commerical as specified in drg.

(vii) Top and two sides of board with 4 mm thick plywood teak finish

(viii) Legs of side board made out of 1st class hardwood (teak).

(t) Repairs to table 3'x2' with drawer : (i) Removing unserviceable table top and S&F new table top of size 3'x2' pre laminated particle board, one side decorated laminated and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as specified and as directed.

(ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of Second class hardwood with French polished complete all as specified and as directed.

(iii) Removing broken drawer and S&F new drawer, sides and rear made with 12 mm thick second class HW planks and front sides made with PB 18 mm thick exterior grade with 18x4 mm teakwood beading all round duly French polished and bottom 6 mm thick, BWR grade plywood and knob/handle all as specified and as directed.

(ix) Replacement of old long stiffner with new long stiffner as per drgs.

(x) Replacement of old short stiffner with new short stiffner as per drgs.

(iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs.

(iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs.

(u) Repairs to table, 3'x2'without drawer (i) Removing unserviceable table top and S&F new table top of size 3'x2', pre laminated particle board, one side decorative lamination and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading ar round duly French polished complete all as specified and as directed.

(ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of second class hardwood with French polished complete all as specified and as directed.

(iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs.

(iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs.

(ix) Replacement of old long stiffner with new long stiffner as per drgs.

(x) Replacement of old short stiffner with new short stiffner as per drgs.

(v) Repair to Table dining 3x3 (i) Replacement of unserviceable top of table dining with 18mm pre lamination particle board including 18x4 mm teak wood beading all round edge of table including french polishing.

(ii) Leg of table dining 3x3 with 1st teak wood including french polish

(iii) Long rail of table dining 3x3 with 1st teak wood including french polish

(iv) Short rail of table dining 3x3 with 1st teak wood including french polish

(v) Stiffner of table dining 3x3 with 1st teak wood including french polish

(vi) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed.

(w) BOOK CASE : The following repairs shall be carried out to Book case after removing old unserviceable parts under Drg No. (i) Repair and replace, old unserviceable top with new top, pre-laminated particle board 18 mm thick exterior grade all as specified and directed.

(ii) Repair and replace, old unserviceable side with new side, pre-laminated particle board 18 mm thick teak face all as specified and directed

(iii) Repair and replace, old unserviceable bottom book case with new bottom of prelaminated particle board 18 mm thick all as specified and directed

(iv) Repair and replace, old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed

(v) Repair and replace, old unserviceable back with new back of plywood 6 mm thick commercial quality all as specified and directed

(x) Diwan (i) Replacing of old unserviceable rexine all as shown on drawings

(ii) Replacing of old unserviceable foam all as shown on drawings

(iii) Replacing of old unserviceable legs all as shown on drawings

(iv) Replacing of old unserviceable long rail all as shown on drawings

(v) Replacing of old unserviceable short rail all as shown on drawings

Removing old cane and recanning any type of chairs (seat or back)(White/Cream Colour) except chair varandah as specified and shown on drg and as directed by Engr-in-Charge.

Chair Varandh (i) Removing old cane and recaning after applying one coat of synthetic white enamel paint on frame of chair varandha all as specified shown on drg and as directed by Eng-in-charge

M&L for scraping the existing polished and smoothen surface with sand paper of grades 2 to 9, filling up the crevices and holes with proper readymade filler or paste of raw sienna in sufficient quantity to obtain desired colour to match the colour of wood works. After preparation of surface applying one coat of wood primer and when the surfaces dries up then applying two coats of French polished, as directed by Engr-in-charge for the following furnitures. (i) Chair easy

(ii) Chair Dinning

(iii) Chair writing

(iii) Stool dressing CB

(iv) Bin-soiled Linen

(v) Table Centre

(vi) Table Peg

(vii) Teapoy

(viii) Table dressing Ladies

(ix) Table dressing Gents

(x) Table dining 6 Person

(xi) Table dining 8 Person

(xi) Sofa set 4 Seater

(xii) Sofa set 5 Seater

(xiii) Sofa set 2 Seater

(xiv) Side board

(xv) Table writing

(xvi) Bed Hard

(iv) Hat stand

Repairs to Almirah large/medium steel (a) Removing the existing unserviceable old locks fromAlmirah steel supply and fix new lock made out of steel body grade I type of 75 mm size with six brass levers (Make Algrah) and with duplicate keys, all and fixed to the steel Almirah with four screw or as required, complete all as specified and directed by Engineer-in-charge.

(b) Removing exisisting unserviceable handle from steel Almirah, supply & fix new steel chromium plated handle of 150 mm size all as per Godrej pattern and fixed to steel Almirah with hexogonal nut & steel pin of appropriate size complete all as specified and directed by Engineer-in-charge

(c ) Taking out existing shelves of any size carrying out all minor repairs to the shelves, refixing the same to the steel Almirah with providing four Nos of new cleats with nuts&bolts all as specified and directed by Engineer-in-charge

(e) Removing the dents,bends of steel Almirah welding to broken portion, rectifying all minor defects and repairs. M&L for preparation of steel surface of almirah (inside and out side) including doors shelves and legs. Providing high class glossy finish with synthetic enamel paint over a coat of red oxide premier whereever required. All complete as directed:- (i) For Almirah large steel

(ii) For Almirah med steel

(iii) For Tepoy Varandha

(iv) Table D man

(v) Chair CB With arm Tubluer steel

Charpoy GI :- i) Removing the existing unserviceabe nylon newar,tightening all the check nuts, elbow, long rails shorts and legs to hold the charpoy tight and to weld 4 nos MS cleats of size 25mm x6mm (2 Each at equal distance at both side of long rail) and to fix 02 nos MS square tube on cleats at equal distance 25 mm x25mm x 1.6 mm thick to support the ply and supply and supply and fixing commercial plywood 12mm thick BWR having on all the sides of plywood with 1 st class teakood beading of size 12mm x 6mm applying french polishing to lipping including fixing to the MS square tube with appropriate machine screws (12 Nos) duly approved complete all as specified and as directed. . Make ( Green ply / duston with ISI Mark ) The MS Square tube be welded and to be painted with one coat of primer and one coat of primer and one coat of SE paint after completly removing / chipping off the welding scales. ( MS square tube should be fixed on MS cleats apprpriatly drilling holes on both be fixed with machine screw and plywood should be fixed with MS clams Drg No FD-220 & FD-386

(ii) Taking out existing unserviceable GI pipe elbow from GI pipe charpoy and S&F new GI elbow 32 mm bore with ISI mark, three way, medium grade, approved quality complete all as specified and directed.

(iii) Taking out existing unserviceable GI check nut from GI charpoy and S&F new 32 mm GI check nut complete all as specified and as directed.

(iv) Taking down existing unserviceable GI Pipe long rail 32 mm bore from GI pipe charpoy and refixing the same after cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed.

(v) Taking down existing unserviceable GI Pipe short rail 32 mm bore from GI pipe charpoy, cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed.

Chair CB Office (i) Front legs as shown on drawing.

(ii) Rear legs as shown on drawing.

(iii) Front rails as shown on drawing.

(iv) Rear rails as shown on drawing.

(v) Side rails as shown on drawing.

(vi) Stiffeners as shown on drawing.

(vii) Arms as shown on drawing.

(viii) Back supports as shown on drawing.

Charpoy Foulding IP With nylon newar TP i) Revoving existing unserviceable ply wood top or newar from the charpoy foulding and supplying and fixing new 8mm thick plywood ISI marked commercial fixing with screw including thickness of ply at equal distance to GI pipe fram of charpoy and fixing the plywood top with MS machine made screw bolt with counter sunk head at one end and other end screwed with washers and one hexagonal nut of 75 mm long dia of neck 5mm and need welding to be repair applying two coats of synthetic enamel paint to stiffeners after one coat of paint primer complete as directed by Eng -in - charge

Teapoy Varandha :- (i) Top of Teapoy Varandha 18mm thick pre laminated particle board including 4mm thick Ist class HW beeding of edge

Namaste Furniture 3 Seater, Two Seater to be grouting including 8'' x 12mm nut & bolt , Hand with PCC, Cement, concrete as per directed by Eng- in- charge

Taking of Elect energy meter reading at DIAT area and entry in MRB, and meter card, and update to rentable register preparing of return of recoveries for elect and water for civilians, Pvt parties, Army Officers, JCOs/OR including and entry of meter card all as directed by Engr-in-Charge.

Supply only Meter Reader's Book Electric & Water In lieu of I.A.F.W.-2183 as per sample given by Engr-in-Charge.

Supply only Meter card in lieu of I.A.F.W. - 2182 (Revised)

DIGHI CHAIR DINING :-Removing unserviceable part of timber carefully from existing position and replacement of timber parts made of teak wood (Ist class) all as specified and shown in drawing for the following items of furniture (i) Front legs as shown on drawing.

(ii) Rear legs as shown on drawing.

(iii) Front rails shown on drawing.

(iv) Rear rails shown on drawing.

(v) Side rails shown on drawing.

(vi) Bottom stiffeners as shown on drawing.

CHAIR EASY (i) Legs as shown on drawing.

(ii) Arms as shown on drawing.

(iii) Seat side rails as shown on drawing.

(iv) Seat front rails as shown on drawing.

(v) Seat rear rails as shown on drawing.

(vi) Back rest as shown on drawing.

CHAIR WRITING (i) Front legs as shown on drawing.

(ii) Rear legs as shown on drawing.

(iii) Front rails as shown on drawing.

(iv) Rear rails as shown on drawing.

(v) Side rails as shown on drawing.

(vi) Stiffeners as shown on drawing.

(vii) Arms as shown on drawing.

(viii) Back supports as shown on drawing.

REPAIRS TO HAT STAND (i) Replacement of old defaced mirror S & F new mirror as per drgs.

(ii) Replacement of broken hooks and S&F hooks as per drgs.

(iii) Replacement of old back side as per drgs.

REPAIRS TO STOOL DRESSING LADIES (i) Replacing of old unserviceable long rails.

(ii) Replacing of old unserviceable side rails.

(iii) Replacing of old unserviceable legs.

TABLE BED SIDE (i) Top of table bed side 12mm thick plywood with synmaica including 4mm thick Ist class Teak Wood beeding of edge as shown in drawings

(ii) Side planks with 12mm plywood with synmaica

(iii) Bottom planks with 12mm plywood

(iv) 6mm commercial plywood of size as shown drawings

(v) Repair and replace old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed.

(vi) Repair and replace old unserviceable legs with existing size and all as specified and directed by Engr-in-charge

TABLE CENTER (i) Top of table center 18mm thick pre laminated particle board including 4mm thick Ist class HW beeding of edge

(ii) Legs of 1st class Teak wood

(iii) Long rail of 1st class Teak wood

(iv) Short rail of 1st class Teak wood

TEAPOY (i) Top of Teapoy 18mm thick pre laminated particle board incl 6mm thick 1st class hard wood teak wood beeding of edge including french polish

(ii) Short rail of 1st class hard wood teak wood including french polish.

(iii) Long rail of 1st class hard wood teak wood including french polish.

(iv) Stiffener short rail of 1st class hard wood teak wood including french polish

(v) Leg of 1st class hard wood teak wood including french polish

TABLE PEG (i) Top of Peg table with 18mm thick pre laminated particle board incl 4mm thick 1st class hard wood teak wood beeding of edge including french polishing.

(ii) Long rail of 1st class hard wood teak wood including french polishing.

(iii) Short rail of 1st class hard wood teak wood including french polishing

(iv) Leg of 1st class teak wood including french polishing

TABLE DRESSING LADIES (i) 5mm thick mirror including plywood all as specified and shown on drawing.

(ii) Drawers all as shown on drawing

(iii) Legs/stiffeners all as shown on drawing

(iv) Top all as shown on drawing

(v) Back all as shown on drawing

(vi) Bottom all as shown on drawing.

(vii) S&F new Knobs for drawers.

(viii) Mirror frame all as shown on drawing.

TABLE DRESSING GENTS (i) 5mm thick mirror including plywood all as specified and shown on drawing.

(ii) Drawers all as shown on drawing

(iii) Top all as shown on drawing

(iv) Back all as shown on drawing

(v) Bottom all as shown on drawing.

(vi) Side all as shown on drawing.

(vii) S&F new Knobs for drawers.

(viii) Mirror frame all as shown on drawing.

TABLE WRITING (i) Replacement of old unserviceable top with new top made out of both side prelaminated particle board one side teak face and other side white face 18 mm thick with 4 mm teak wood beeding all as per drgs.

(ii) Replacement of old unserviceable legs with new legs made out of 1st class teak wood as per drgs.

(iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs.

(iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs.

(v) Replacement of old unserviceable drawers with new drawers as per drgs.

(vi) Replacement of old shutters of cupboards with new shutters as per drgs.

(vii) Replacement of old side portion of cupboards with new side portions as per drgs.

(viii) Replacement of old back portion of cupboards with new back portions as per drgs.

(ix) Replacement of old long stiffner with new long stiffner as per drgs.

(x) Replacement of old short stiffner with new short stiffner as per drgs.

Sofa 4 Seater (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer.

(ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed.

(iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed

(iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed.

(v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed.

Sofa Single Seater (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer.

(ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed.

(iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed

(iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed.

(v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed.

Sofa 5 Seater (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer.

(ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed.

(iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed

(iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed.

(v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed.

Repairs to table dining 6 persons, (i) Removing unserviceable table top and S&F new table top, of size 1500x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed.

(ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed.

(iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed.

Repairs to table dining 8 persons (i) Removing unserviceable table top and S&F new table top, of size 1800x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed.

(ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed.

(iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed.

(v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed.

Bed hard: (i) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of head board with 4 mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed.

(ii) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of foot rest with 4mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed.

(iii) Removing broken long rail from the bed hard and S&F new Second class hardwood long rail of size 1980x90x35 mm as per existing pattern with French polish complete all as specified and as directed.

(iv) Removing broken short rail from the bed hard and S&F for new Second class hardwood long rail of size 900x90x35 mm as per existing pattern and French polished complete all as specified and as directed.

(v) Removing broken legs and S&F for new legs of Second class hardwood of size 600x600x40 mm as per existing pattern and French polished complete all as specified and as directed.

(vi) Removing broken unserviceable head board and S&F new head board as per drawing and French polished complete all as specified and as directed.

(vii) Removing broken unserviceable foot rest and S&F new foot rest as per drawing and French polished complete all as specified and as directed.

(viii) Removing the unserviceable plywood top and S&F with new top of size 1900x850x12 mm commercial plywood ISI marked complete all as specified and as directed.

(ix) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed.

Side board: (i) Replacement of doors with 18 mm pre-laminated particle board interior grade one side with natural teak wood veneer including butt hinges and knobs complete.

(ii) Drawer for table replaced with pre-laminated particle board on one side 18 mm thick with teak wood edging 4 mm thick all as directed.

(iii) Bottom of drawer made out of 6 mm thick plywood commercial and fitted in drawer frame

(iv) Side rail of drawer made out of 1st class hardwood (teak)

(v) Knobs chromium plated 35 mm with bolt and nut

(vi) Back of side board with 6 mm thick plywood commerical as specified in drg.

(vii) Top and two sides of board with 4 mm thick plywood teak finish

(viii) Legs of side board made out of 1st class hardwood (teak).

Repairs to table 3'x2' with drawer : (i) Removing unserviceable table top and S&F new table top of size 3'x2' pre laminated particle board, one side decorated laminated and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as specified and as directed.

(ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of Second class hardwood with French polished complete all as specified and as directed.

(iii) Removing broken drawer and S&F new drawer, sides and rear made with 12 mm thick second class HW planks and front sides made with PB 18 mm thick exterior grade with 18x4 mm teakwood beading all round duly French polished and bottom 6 mm thick, BWR grade plywood and knob/handle all as specified and as directed.

(iv) Replacement of old long stiffner with new long stiffner as per drgs.

(v) Replacement of old short stiffner with new short stiffner as per drgs.

(vi) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs.

(vii) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs.

Repairs to table, 3'x2'without drawer (i) Removing unserviceable table top and S&F new table top of size 3'x2', pre laminated particle board, one side decorative lamination and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading ar round duly French polished complete all as specified and as directed.

(ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of second class hardwood with French polished complete all as specified and as directed.

(iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs.

(iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs.

(v) Replacement of old long stiffner with new long stiffner as per drgs.

(vi) Replacement of old short stiffner with new short stiffner as per drgs.

BOOK CASE : The following repairs shall be carried out to Book case after removing old unserviceable parts under Drg No. (i) Repair and replace, old unserviceable top with new top, pre-laminated particle board 18 mm thick exterior grade all as specified and directed.

(ii) Repair and replace, old unserviceable side with new side, pre-laminated particle board 18 mm thick teak face all as specified and directed

(iii) Repair and replace, old unserviceable bottom book case with new bottom of prelaminated particle board 18 mm thick all as specified and directed

(iv) Repair and replace, old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed

(v) Repair and replace, old unserviceable back with new back of plywood 6 mm thick commercial quality all as specified and directed

Removing old cane and recanning any type of chairs (seat or back)(White/Cream Colour) except chair varandah as specified and shown on drg and as directed by Engr-in-Charge.

Chair Varandh (i) Removing old cane and recaning after applying one coat of synthetic white enamel paint on frame of chair varandha all as specified shown on drg and as directed by Eng-in-charge

M&L for scraping the existing polished and smoothen surface with sand paper of grades 2 to 9, filling up the crevices and holes with proper readymade filler or paste of raw sienna in sufficient quantity to obtain desired colour to match the colour of wood works. After preparation of surface applying one coat of wood primer and when the surfaces dries up then applying two coats of French polished, as directed by Engr-in-charge for the following furnitures.(i) Chair easy

(ii) Chair Dinning

(iii) Chair writing

(iv) Stool dressing CB

(v) Bin-soiled Linen

(vi) Table Centre

(vii) Table Peg

(viii) Teapoy

(ix) Table dressing Ladies

(x) Table dressing Gents

(xi) Table dining 6 Person

(xii) Table dining 8 Person

(xiii) Sofa set 4 Seater

(xiv) Sofa set 5 Seater

(xv) Sofa set 2 Seater

(xvi) Side board

(xvii) Table writing

(xviii) Bed Hard

(xix) Hat stand

Repairs to Almirah large/medium steel(a) Removing the existing unserviceable old locks fromAlmirah steel supply and fix new lock made out of steel body grade I type of 75 mm size with six brass levers (Make Algrah) and with duplicate keys, all and fixed to the steel Almirah with four screw or as required, complete all as specified and directed by Engineer-in-charge.

(b) Removing exisisting unserviceable handle from steel Almirah, supply & fix new steel chromium plated handle of 150 mm size all as per Godrej pattern and fixed to steel Almirah with hexogonal nut & steel pin of appropriate size complete all as specified and directed by Engineer-in-charge

(c ) Taking out existing shelves of any size carrying out all minor repairs to the shelves, refixing the same to the steel Almirah with providing four Nos of new cleats with nuts&bolts all as specified and directed by Engineer-in-charge

(e) Removing the dents,bends of steel Almirah welding to broken portion, rectifying all minor defects and repairs. M&L for preparation of steel surface of almirah (inside and out side) including doors shelves and legs. Providing high class glossy finish with synthetic enamel paint over a coat of red oxide premier whereever required. All complete as directed:- (i) For Almirah large steel

(ii) For Almirah med steel

(iii) For Tepoy Varandha

(iv) Table clk steel

(v) Chair CB With arm Tubluer steel

Charpoy GI :- i) Removing the existing unserviceabe nylon newar,tightening all the check nuts, elbow, long rails shorts and legs to hold the charpoy tight and to weld 4 nos MS cleats of size 25mm x6mm (2 Each at equal distance at both side of long rail) and to fix 02 nos MS square tube on cleats at equal distance 25 mm x25mm x 1.6 mm thick to support the ply and supply and supply and fixing commercial plywood 12mm thick BWR having on all the sides of plywood with 1 st class teakood beading of size 12mm x 6mm applying french polishing to lipping including fixing to the MS square tube with appropriate machine screws (12 Nos) duly approved complete all as specified and as directed. . Make ( Green ply / duston with ISI Mark ) The MS Square tube be welded and to be painted with one coat of primer and one coat of primer and one coat of SE paint after completly removing / chipping off the welding scales. ( MS square tube should be fixed on MS cleats apprpriatly drilling holes on both be fixed with machine screw and plywood should be fixed with MS clams Drg No FD-220 & FD-386

(ii) Taking out existing unserviceable GI pipe elbow from GI pipe charpoy and S&F new GI elbow 32 mm bore with ISI mark, three way, medium grade, approved quality complete all as specified and directed.

(iii) Taking out existing unserviceable GI check nut from GI charpoy and S&F new 32 mm GI check nut complete all as specified and as directed.

(iv) Taking down existing unserviceable GI Pipe long rail 32 mm bore from GI pipe charpoy and refixing the same after cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed.

(v) Taking down existing unserviceable GI Pipe short rail 32 mm bore from GI pipe charpoy, cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed.

Chair CB Office (i) Front legs as shown on drawing.

(ii) Rear legs as shown on drawing.

(iii) Front rails as shown on drawing.

(iv) Rear rails as shown on drawing.

(v) Side rails as shown on drawing.

(vi) Stiffeners as shown on drawing.

(vii) Arms as shown on drawing.

(viii) Back supports as shown on drawing.

Teapoy Varandha :- (i) Top of Teapoy Varandha 18mm thick pre laminated particle board including 4mm thick Ist class HW beeding of edge

Taking of Elect energy meter reading at R&DE Dighi area and entry in MRB, and meter card, and update to rentable register preparing of return of recoveries for elect and water for civilians, Pvt parties, Army Officers, JCOs/OR including all As directed by Engr-in-Charge.

Supply only Meter Reader's book electric & water In lieu of I.A.F.W-2183 as permple given by engr-in-Charge

Supply only Meter card in lieu of I.A.F.W. - 2182 (Revised)

M/s SK Construction

M/s Green Leaf Electricals

M/s Mitesh Agencies