Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC | ₹12.8 L | L1 | Accepted-AOC Quoted Lowest Rate |
| 2 | L2₹13.0 LRejected-Finance | ₹13.0 L | L2 | Rejected-Finance Quoted Higher Rate |
| 3 | L3₹13.1 LRejected-Finance NAYA BAZAR KURSEONG | KURSEONG | ₹13.1 L | L3 | Rejected-Finance Quoted Highest Rate |
Tender Value
₹12.8 L
EMD Value
₹25,604
Closing Date
23 Feb 2026, 6:00 pmClosed
Executive Engineer, PRDD, GTA
PANCHAYAT AND RURAL DEVELOPMENT DEPARTMENT, LUICES JUBLEE COMPLEX DARJEELING.
Construction of sales counter and other allied work at Giddapahar view point, Ghayabari -I GP, Kurseong Dev.Block,GTA.
2026_GTA_1002387_1
17(NIeT)/PRRDD (15CFC)/ZP/T/UtF)/GTA/2025-26
Open Tender
CIVIL WORKS
120 days
KURSEONG BLOCK
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹25,604
24 Mar 2026
9 Feb 2026
26 Feb 2026
9 Feb 2026
23 Feb 2026
9 Feb 2026
Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. .
(a) Depth of excavation not exceeding 1.500 mm.
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete .(payment to be made on the basis of measurement of finished quantity of work).
(a) With earth obtained from excavation of foundation.
Excavation for road way in hard rock (blasting prohibited) with rock breakers including breaking rock,loading in tippers and disposal within all lifts and lead upto 1000 metres, trimming bottom and side slopes inaccordance with requirements of lines, grades and cross sections as per Clause 301 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (Mode of measurement: pre works and post works)
Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling but including ramming.
Cost of stone boulder 150 mm size delivered ans stacked at site.
(I) Cement concrete with graded stone ballast (40 mm size) excluding shuttering.In ground floor.
(B) With N.B variety stone metal.
(a) 1:3:6 proportion.
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes.
(b) River bazree.
Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor).
( c ) 9 to 12 mm. thick approved quality ply board shuttering in any concrete work.
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.
(a) For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel.
other than SAIL/TATA/RINL/JSW/JSPL/Shyam/SRMB/ISSL/BMASL/Electrosteel
125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor.
Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface].
(ii) With 1:4 cement mortar .
(a) 20 mm.thick plaster.
(a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G. of approved type, steel latche section 75 mm.wide, fitted with coil wire spring to necessitate the fitting of required No. of C.I. pulleys on heavy type solid drawn seamless steel tube complete with locking arrangement both inside and ouside specially built up side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.(Measurement will be made on the area of opening covered by the rolling shutter corrected, upto 2 decimal.)2. Payment of painting to be separately.
(a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor).
(i) Grill weighing above 10 kg./sq.m.and up to 16kg/sq.m.
Supplying,Fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 Kg/Sq.m.
(a) Area of each tile up to 0.09Sq.m.
(ii) Other than Coloured decorative including white.
(b) Priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.
(a) On timber or plastered surface: .
(1) With super gloss (hi-gloss).
(iv) Two coats (with any shade except white).
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.
(b) On steel or other metal surface: .
(1) With super gloss (hi-gloss).
(iv) Two coats (with any shade except white).
Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site
In Fine dressed work in Building
In Ground Floor
Add 18% GST
Add 1% Cess
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.22 MB
Tendernotice_2.pdf
PDF • 1.25 MB
BOQ_2456695.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid