REPAIR MAINT SERVICING OF EOT AND HOT CRANES MAINT OF CRANE TRACK WHEELS DRIVES SHAFTS AND GEAR BOXES PULLEY ETC AT 512 ABW AND CAFVD WITH CONNECTED WORK UNDER AGE E M II IN GE CENTRAL KHADKI

Amount

M&L for dismantling and removing of unserviceable driving /traveling for cross travel mild steel wheel including all accessories like Top plate, wheel shaft, bearing housing, bearings drive gear and wheel and connected accessories complete of EOT cranes capacity 0.5 ton to 5 ton. Cleaning all accessories to check the condition all as directed by Engr-in-Charge at site.

All as per Item Ser No 1.00 above but of EOT Crane capacity 10 to 20 Ton cranes -ditto-

All as per Item Ser No 1.00 above but of EOT Crane capacity 50 Ton cranes -ditto-

M&L for assembling and testing driving /traveling for cross travel mild steel wheel including replacement of unserviceable spares and parts like wheel shaft, bearing housing, bearings, driving axel, spacers/sims, nuts, bolts, wahsers and all packing materials, greasing the wheel and testing the crane of capacity 0.5 ton to 5.0 ton for smooth functioning all as as specified and directed by Engineer-in-Charge at site.

All as per Item Ser No 4.00 above but of EOT Crane capacity 10 to 20 Ton cranes -ditto-

All as per Item Ser No 4.00 above but of EOT Crane capacity 50 Ton cranes -ditto-

M&L for dismantling and removing of unserviceable driving /traveling for Long travel mild steel wheel including all accessories like Top plate, wheel shaft, bearing housing, bearings, driving axel, plumber block and wheel and connected accessories complete of EOT cranes capacity 0.5 ton to 5 ton. Cleaning all accessories to check the condition all as directed by Engr-in-Charge at site.

All as per Item Ser No 7.00 above but of EOT Crane capacity 10 to 20 Ton cranes -ditto-

All as per Item Ser No 7.00 above but of EOT Crane capacity 50 Ton cranes -ditto-

M&L for assembling and testing driving /traveling for Long travel mild steel wheel including replacement of unserviceable spares and parts like wheel shaft, bearing housing, bearings, driving axel, plumber block, spacers/sims, nuts, bolts, washsers and all packing materials, greasing the wheel and testing the crane of capacity 0.5 ton to 5.0 ton for smooth functioning all as as specified and directed by Engineer-in-Charge at site.

All as per Item Ser No 10.00 above but of EOT Crane capacity 10 to 20 Ton cranes -ditto-

All as per Item Ser No 10.00 above but of EOT Crane capacity 50 Ton cranes -ditto-

Note for Item No 1.00 to 12. 00 :- (i) Contractor should visit site before quoting. Necessary safetymeasures to be taken by the contractor while dismantling and fixing the Crane Wheels as the work site is at the height of approx 20 ft. (ii) Any damage to govt property while exceuting the work is to be make good by the contractor at no extra cost. (iii) Contractor should provide skilled labour while executing the job. (iv) All the Gears, bearings and shaft is to dismantled under hydraulic press or by the pullers only (v) The cost of Scaffolding arrangement/Ladders/ safetybelts/ Lifting Jacks and T & P used while working in the Crane will be beared by the contractor itself. (vi) Once intimated the contractor should complete the works within 3 working days, at the earliest otherwise a penalty of Rs 1000/- per day will have to be paid by the contractor.

M & L for replacement of brake Shoe lining as per existing size with suitable rivets for the drum size 100mm, sanding the surface of the drum to make better grip, setting and testing complete for smooth functioning of EOT Crane upto entire satisefaction of Engr-in-Charge. Make :- Top Enterprises/ Speedocontrol

All as per item Ser No 14.00 above but drum size 150mm -ditto-

All as per item Ser No 14.00 above but drum size 200mm -ditto-

All as per item Ser No 14.00 above but drum size 250mm -ditto-

All as per item Ser No 14.00 above but drum size 300mm -ditto-

Note for Item No 14.00 to 18. 00 :- (i) Necessary safetymeasures to be taken by the contractor while dismantling and fixing the brake shoes.

Supply , Fixing and testing of Electro Hydraulic thruster of size / capacity 18 Kgs all as existing type with first fill of hydraulic oil incl dismantling and removing old unsv thruster complete all as specified and directed by Engr-in-charge. Make :- Top Enterprises/ Speedocontrol

Supply , Fixing and testing of Electro Hydraulic thruster of size / capacity 34 Kgs all as existing type with first fill of hydraulic oil incl dismantling and removing old unsv thruster complete all as specified and directed by Engr-in-charge. Make :- Top Enterprises/ Speedocontrol

Supply, installation, connecting, testing of Electro Hydraulic thruster mounting assembly complete, including 100 mm brake shoe with lining (pair), 100 mm dia drum, and thruster 18 Kgs capacity all as per existing, existing type with nut ,bolts etc incl dismantling and removing old unsv thruster assembly complete all as specified and directed by Engr-in-charge. Make :- Top Enterprises/ Speedocontrol Note :- (i) Necessary safetymeasures to be taken by the contractor while dismantling and fixing the Crane brake. (ii) Quoted rates included connecting electric connections as per existing and any required addition/alteration , welding work as per site requirement and as directed by Engr-in-Charge.

All as per item Ser No 22.00 above but including 150 mm brake shoe with lining (pair), 150 mm dia drum, and thruster 18 Kgs capacity -ditto-

All as per item Ser No 22.00 above but including 200 mm brake shoe with lining (pair), 200 mm dia drum, and thruster 18 Kgs capacity -ditto-

All as per item Ser No 22.00 above but including 250 mm brake shoe with lining (pair), 250 mm dia drum, and thruster 18 Kgs capacity -ditto-

All as per item Ser No 22.00 above but including 300 mm brake shoe with lining (pair), 300 mm dia drum, and thruster 34 Kgs capacity -ditto-

M&L for dismantling main/auxilary Hook/hoist assy and taking down wire rope of EOT Crane of capacity upto 5.0 ton for carrying out repair work by dismantling the complete assy and cleaning the complete assy, replacement of unserviceable parts like bearing, locking plate, nuts & bolts, apply grease to bearings and all moving parts and painting the hook assembly with two coats of Red colour and assembling the same with existing/ new wire rope, testing for entire satisfaction of Engr-in-charge. Note :- (i) Necessary safetymeasures to be taken by the contractor while dismantling and fixing the Crane hook/hoist. Contractor is responsible for any damage to the govt property during execution of job. (ii) Rates including all necessary T&P, safety equipments for completion of the job. (iii) Any type of addition/alteration , welding work is to included in quoted. (iv) Wire rope if required measured and paid under relevant item as supply only.

All as per Item No 27.00 above but EOT crane of capacity 10 ton to 20 ton -ditto-

All as per Item No 27.00 above but EOT crane of capacity 50 ton -ditto-

M&L for cleaning of EOT crane track, checking pressure plates with nut bolts, side support plates, replacement of worn out plate, nut & bolts and pressure plate at required distance, including repair of track with necessary welding work for smooth functioning of EOT crane of capacity upto 5 ton all as specified and as directed. Note :- (i) Contractor should visit site before quting. Necessary safetymeasures to be taken by the contractor while dismantling and fixing the Crane Wheels as the work site is at the height of approx 20 ft. (ii) Any damage to govt property while exceuting the work is to be make good by the contractor ar no extra cost. (iii) Contractor should provide skilled labour while executing the job. (iv) The cost of Scaffolding arrangement/Ladders/ safetybelts/ Lifting Jacks and T & P used while working in the Crane will be beared by the contractor itself.

All as per Item No 30.00 above but crane capacity from 10 Ton to 20 Ton -ditto-

All as per Item No 30.00 above but crane capacity from 50 Ton -ditto-

M&L for dismantlling & removing driving shaft of EOT Crane, coupling sets, repair/replacement of old unserviceable coupling, nut & Bolts, balancing the shaft with drive wheel and motor, greasing to the all moving parts complete for the EOT Crane of capacity upto 5 Ton all as specified and as directed by Engr-in-Charge at site

All as per Item No 33.00 above but crane capacity from 10 Ton to 20 Ton -ditto-

All as per Item No 33.00 above but crane capacity from 50 Ton -ditto-

Material and labour for repair /servicing of Crane Gear Box long travel/cross travel/aux hoist/main hoist of EOT crane capacity upto 5 ton, at any height including draining gear oil, opening gear box, cleaning all parts, checking of gears, bearing, oil seal, replacement of oil, worn out gear with shaft, bearings, gasket, removal of leakage of oil, re-filling gear oil all as specified and as directed by Engr-in-Charge at site. Note (i) Crane gear Oil, gear with shaft, bearing will be measured & paid separately under relevant items, minor spares like, gasket, oil seal will be included in the unit rate. (ii) Necessary safetymeasures to be taken by the contractor while dismantling and fixing the various shafts, gears of gear box etc.

All as per Item No 36.00 above but crane capacity from 10 to 20 Ton -ditto-

All as per Item No 36.00 above but crane capacity from 50 Ton -ditto-

Supply only following parts of Gear Box of EOT crane for replacement during servicing all as specified and as directed Note: Labour for replacement/top up of part and oil will be measured in respective item No 36 above

Gear oil for Crane Gear Box of long travel/cross travel/aux hoist/main hoist of EOT crane Make :- Servo /HP/ Castrol

Drive shaft with integral pinion and gear wheel assembly of gear box as per existing gears of crane upto 5 ton capacity

Drive shaft with integral pinion and gear wheel assembly of gear box as per existing gears of crane 10-20 ton capacity

Drive shaft with integral pinion and gear wheel assembly of gear box as per existing gears of crane 50 ton capacity

Output shaft with integral pinion and gear wheel assembly of gear box as per exisitng gears of crane upto 5 ton capacity

Output shaft with integral pinion and gear wheel assembly of gear box as per exisitng gears of crane 10-20 ton capacity

Output shaft with integral pinion and gear wheel assembly of gear box as per exisitng gears of crane 50 ton capacity

Breaing as per existing number ( 6008/6308/6212/22212/22216/2218/6210)

Material and labour for replacement of brake drum of 100mm dia, sanding of surface for brake grip, all as specified and as directed by Engr-in-Charge at site.

Material and labour for replacement of brake drum of 150mm dia, sanding of surface for brake grip, all as specified and as directed by Engr-in-Charge at site.

Material and labour for replacement of brake drum of 200mm dia, sanding of surface for brake grip, all as specified and as directed by Engr-in-Charge at site.

Material and labour for replacement of brake drum of 250mm dia, sanding of surface for brake grip, all as specified and as directed by Engr-in-Charge at site.

Material and labour for replacement of brake drum of 300mm dia, sanding of surface for brake grip, all as specified and as directed by Engr-in-Charge at site. Note for Item No 38.00 to 42.00 : (i) The work is to be carried out at the height of above 25 feet. (approx) (ii Necessary safety measures to be taken by the contractor while working at site. (iii Any damage/loss to the govt property while doing the job will be borne by the contractor. (iv) Rates including T&P, welding work, required material as required at site for execution of the job.

Material and labour for replacement for Galvanised steel wire rope of 6 x 36 construction of best improved plow steel having minimum tensile strenght of 180kg/sqmm of size 10mm dia complete all as specified and directed by Engr-in-charge at site.

All as per item No 46 above but size 12mm dia -ditto-

All as per item No 46 above but size 14mm dia -ditto-

All as per item No 46 above but size 18mm dia -ditto-

All as per item No 46 above but size 22mm dia -ditto-

All as per item No 46 above but size 24mm dia -ditto-

All as per item No 46 above but size 28mm dia -ditto-

Note for Item No 45.00 to 51.00 : (i) The work is to be carried out at the height of above 25 feet. (approx) (ii Necessary safety measures to be taken by the contractor while working at site. (iii Any damage/loss to the govt property while doing the job will be borne by the contractor. (iv) Rates including T&P, welding work, required material as required at site for execution of the job.

Material and labour for servicing of Crane drive wheel of long travel and cross travel with opening cover plate, bearing, shaft etc cleaning, checking and replacement of unserviceable parts, greasing all movable parts complete, crane capacity upto 5 ton all as specified and as directed by Engr-in-Charge at site. Note :- (i) Necessary safetymeasures to be taken by the contractor while dismantling and fixing the Crane wheel . Contractor is responsible for any damage to the govt property during execution of job. (ii) Rates including all necessary T&P, safety equipments for completion of the job. (iii) Any type of addition/alteration , welding work is to included in quoted. (iv) Contractor should visit the sire before quoting the rate

All as per Item No 53.00 above but crane capacity from 10 Ton to 20 Ton -ditto-

All as per Item No 53.00 above but crane capacity from 50 Ton -ditto-

Material and labour for servicing of Crane rope drum of crane capacity upto 5 ton, taking down wire rope, cleaning rope drum, opening rope drum assembly, bearing block, bearing housing, coupling, cleaning of bearing and chek for servicibility, greasing to bearing, replacement of worn out parts, oil seal etc, assembling rope on drum for smooth functioning of crane and testing of crane in presence of Engr-in-Charge. Note :- (i) Necessary safetymeasures to be taken by the contractor. Contractor is responsible for any damage to the govt property during execution of job. (ii) Rates including all necessary T&P, safety equipments for completion of the job. (iii) Any type of addition/alteration , welding work is to included in quoted. (iv) Contractor should visit the sire before quoting the rate

All as per Item No 56.00 above but crane capacity from 10 Ton to 20 Ton -ditto-

All as per Item No 56.00 above but crane capacity from 50 Ton -ditto-

M & L for Cleaning of total structure of EOT crane upto 5 Ton capacity including , removal of all grease, oil, dust & dirt complete from crane platform , all side walls, supporting beams, brackets ,pipe supports , guards complete including control panels, cabins, etc complete and painting the total structure of crane with existing colour with two coats of synthetic enamel paint complete all as directed by Engr-in-charge. Note:- (i) The quality of paint should be as per existing quality make :- Nerolac/ Asian paints (ii) Necessary safety measures to be taken by the contractor while cleaning and painting of the crane . (iii) Any damage/loss to the govt property while doing the job of painting will be borne by the contractor. (iv) The cost of T&P such as Paints , ropes, ladders, brushs, red oxide etc required for the job is included in the quoted rates. (v) The work is to be carried out at the height of above 25 feet.

All as per Item No 59.00 above but crane capacity from 10 Ton to 20 Ton -ditto-

All as per Item No 59.00 above but crane capacity from 50 Ton -ditto-

M & L for cutting/fabricating, fixing & welding of MS angle iron of size as per site requirement for fixing Chequered plates/ making ladders, supports fixing brackets etc including bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including removing old damaged supports, ladders etc of any size all as directed at site by Engr-in-charge.

M/S. Niksun Electro-Infra Private Limited (BID ID -3131096)

Dinesh Enterprises (BID ID -3121924)

shakti engineering and electrical works (BID ID -3131275)