REPAIRS TO K.T.WEIR NO-1 AT PALA TQ. MORSHI. DIST. AMRAVATI

Item No.1:- Cleaning grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area as directed.

Item No.2:- Excavation in Soft strata including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with leads as below and all lifts as directed.

Item No 3:- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Concrete Mixer including shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed.

Item No 4:- Providing and Fixing in position Mild Steel/HYSD bar Reinforcement of various diameter for RCC Work, pipe, caps, footing, foundation, slab beam, column, canopies, chhaja, lintels, copings, as per detail drawing and schedule, including cutting, bending, hooking, binding with wire, tack welding and supporting as required as per standard specification with all leads & lifts etc complete as directed by the Engineer-In Charge.

Item No 5:- Providing and Fixing ISLC of 150 X 100 mm grooved channels for lowering steel needles with 20 mm dia. Steel hold fasts in line and level with all required tack welding and supporting including one coat of anticorrosive paint and two coats of oil paint of approved quality and shade etc complete with all leads and lift as per standard specification and as directed by the Engineer-In- Charge.

Item No.6 :- Hot- Dip Galvanised Needle Gate - Providing and fixing at site (all over Maharashtra) Hot- Dip Galvanised curved Needle Gate of size 3.20 m x 1.75 m x 543 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints.It includes all materials, Labour charges, machinery charges, loading and unloading charges of Gate parts, Inspection & Quality control and testing charges etc complete.

Item No. 7 :- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm etc complete as directed by the Engineer-In Charge

Please Enable Macros to View BoQ information