PROVISION OF DEFICIENT FURNITURE AT MARRIED ACCOMMODATION AT 13 BRD, AF UNDER GE (P) AF GURGAON

Amount

Sch 'A' Part-I (Wooden Furniture) Supply of Chair Dining : (FD/E6/MAP/10) (a) All wood work shall be of first class hard wood (Teak) (b) Seat shall be 75mm thick 40 density foam covered with febric on 12mm thick BWRplywood as per IS-303, Febric shall be (c) Nylon buffers/hard PVC ring 20mm dia shall be screwed to the bottom of the legs. (d) All exposed wooden surface shall be French polish glossy finish. (e) All joints/fixing shall be done in accordance with standard workmanship and (f) Rest all as shown on drawing.

Supply of Pag Table : (FD-277/384) All as per drg & specification wood shall be of first class seasoned teak wood free from creak knot 18 mm thick pre laminated particle board exterior grade IS – 12823 providing 4 mm thick teak wood beading around the top. All exposed portion shall be polished with French polish in high glossy finish rest all as shown on drg.

Sch 'A' Part-II (Steel Furniture) Supply of Bead hard (FD/E6/MAP/08(R) (a)Bed Hard shall be manufactured all as per details shown in the drawing. All dimensions shape and size shall be followed as per drawing. (b) All Square and rectangular MS pipe shall be of thickness 18 gauge. (c) Top of bed shall be of 12 mm thick commercial ply wood ISI marked BWR as per IS-303 of approved make. (d) 18mm prelaminated particle board exterior grade as per IS-12823 of approved make shall be used in head & foot board with standard PVC edging 1.6 mm thick all round the board. (e) All steel surface shall be black powder coating. (f) Rest all specified and shown on drawing.

Supply of Almirah Steel medium : (FD-1032) Overall size shall be 1270mm high, 765 mm wide and 440mm deep. The base shall be made of two number mild steel channel base welded to bottom almirah and shall be 100mm high mild steel sheet shall 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width. Top, sides, back, bottom and front of almirah shall be of 1 mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet. Front shutters shall have two leaves. A steel chromium plated handle 100mm long shall be provided to the shutter. A three way locking device shall be provided to front shutters. PVC sheet of size equal to size of leg base shall also be fixed under the legs of almirah irrespective of what is shown on drg. All joints and welding fixing shall be done according to standard workmanship. All steel surfaces exposed to view when placed in position shall be painted with two coats of granular silver grey enamel paint over a coat of primer with spray machine after preparation of surfaces rest all as per drgs.

Supply of Computer Chair : (FD/E6/MAP/01(R) All as shown on drg Tubular Frame shall be cantilever Type and made of 25mm Dia and Powder coated 12mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam with PVC Dipping all around . Rest all as shown on drg.

Supply of Charpoy IP with hard top : (FD/MAP-II/01) Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rail and two short rail shall be of 25mmx65mmx16guage MS rectangular pipe. The legs shall be of size 32mmx32mmx16 guage welded to long rail as shown on drg. Two stiffener of size 25mmx25mmx16 guage shall be provided in equidistant between two opposite long rail. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joint legs of size 25mmx25mmx16 guage shall be provided at 150mm from ground level 12mmthick BWR plywood shall be provided for top as shown on drg with proper nut and bolt. All steel surfaces shall be painted with synthetic enamel olive green in colour including applying a coat of primer. Rest all as per drg.

Supply of Chair Varandah : FD/E6/MAP/11 (a) 19mm dia 1.6mm thick conduit pipe shall be used for the frame as shown in drawing. (b) PVC seat & back 4mm thick wt not less than 1.85Kg of seat & Back and grooves 10No on seat & back of size 90x10mm shall be used make AMKO/SUPREME/CELLO. (c) All Joints/Fixing shall be done in accordance with standard workmanship and specifications. (d) Best quality PVC inner shoe shall be used. (e) All steel Members shall be powder coated. (f) Rest all as shown on drawing.

Rana Construction Co

M/S Shri Balaji Enterprises

Supreme Builders

ASHOKA FURNITURES

SMS Enterprises

ANAND FURNITURE

Capital Construction Company

Jiwan Singh and Sons

Nav Bharat Timber Traders

K RAJAN INDUSTRIES

SOHAN SINGH AND SONS