COMPLETION OF BALANCE WORK AT RISK AND COST OF CONTRACTOR FOR PERIODICAL SERVICES TO INTERNAL AND EXTERNAL WHITE WASH/COLOUR WASH, OIL BOUND DISTEMBER, PLASTIC PAINT, CEMENT BASE PAINTS, PLASTER, REPAIRS TO FINS, FACIA, CHAJJAS INSIDE TECHNICAL AREA,

Amount

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc upto 15m height complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc upto 15m height complete all as specified and directed.

M&L for applying one coat of white wash on old decorative surface of walls already prepared againt item No 1.00 above complete all as specified and directed

M&L for applying one coat of oil bound distemper on old decorative surface of walls already prepared againt item No 1.00 above complete all as specified and directed

M&L for applying one coat of cement base paint on old painted surface of wall already prepared against item No 1.00 above upto 15m height complete all as specified and directed.

M&L for applying one coat of acrylic smooth exterior paint upto 15m ht (shade already approved by GE (I) over base coat of tinned 1:1 water mix on old decorated already prepared against item No 1.00 above upto 15m height complete all as specified and directed.

M&L for aplying one coat of white wash on old decorative surfaces of ceiling already prepared against item No 2.00 above complete all as specified and directed.

Complete removal of existing treatment (white wash, colour wash, or any other treatment) of wall by brooming down on steel wire brushing scrapin g down smoke sot moulds, moss and efforescent salts and trading oil greasy spot etc complete all as specified and directed.

M&L for applying two coats of plastic emulsion paint on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces already prepared against item No 8.00 above complete all as specified and directed.

M&L for applying two coats of oil bound distemper on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces already prepared against item No 8.00 above complete all as specified and directed.

M&L for applying 1.00 to 2.00 mm thick Birla white putty of JK white wall care putty on walls for preparation of even and smooth surface at any location including filing holes of nails and scratches preparation of surfaces complete all as specified and directed.

Taking down old cement plaster from birck or concrete surfaces including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface of walls in cement mortar (1:6) including finishing the surface even and smooth complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) mixed with water proofing compound @ 2% by weight of cement upto 15m height complete all as specified and directed. Note : Water proofing compound shall be measured and paid seperately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface of walls by brooming down brushing etc complete all as specified and directed.

M&L for applying two coats of plastic emulsion paint over 1.00 to 1.20mm thick Birla white putty or JK White wall care putty on walls for preparation of even and smooth surfaces at any location filing the holes of nails and scratches over one coat of primer of walls complete all as specifed and directed.

M&L for applying two coats of oil bound distemper over a coat of primer on new surfaces of walls prepared against item No 16.00 above complete all as specified and directed.

M&L for applying two coats of acrylic smooth exterior emulsion paint (shade as approved by GE (I)) over base coat of tinned 1:1 water mix on new surface upto 15m height complete all as specified and directed.

M&L for preparation of old wooden painted surfaces of any description not otherwise described over 10 cm width or girth including burning off or removing paint etc, complete all as specified and directed.

All as per ser item no 20.00 above but on old steel painted surfaces.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces of any description not otherwise described over 10 cm width or girth surface prepared against item No 20.00 above complete all as specified and directed.

All as per ser item No 22.00 above but on old steel painted surfaces against item No 21.00 above complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, of area n exc 1.5 sqm complete all as specified and directed.

M&L for sheet glass ordinary quality 4mm thick and glazing with oil putty in square not exceeding .50sqm in each pane complete all as specified and directed.

Demolition of reinforced cement concrete not exceeding 15 cm thickness, below or above ground level of any description complete all as specified and directed.

M&L for RCC work in 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in fins, chajjas, facia, louvers, railing and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work ; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

Formwork to soffits of suspended slabs such as fins, chajjas, facia, louvers, railing and similar work upto 15m height complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing complete all as specified and directed.

All as per ser item No 31.00 above but in stirrups complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises out of MD land where directed complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished area of each tile exceeding 0.35 sqm not exc 0.42 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Note : Colour, design and pattern shall be approved by GE. Make M/s Somany Pikington Limited (Haryana)/Orient/Johnson (India) Pvt Ltd as approved by GE.

M&L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished area of each tile exceeding 0.35 sqm not exc 0.42 sqm for work on vertical surfaces wuch as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Colour, design and pattern shall be approved by GE. Make M/s Somany Pikington Limited (Haryana)/Orient/Johnson (India) Pvt Ltd as approved by GE.

M&L for glazed ceramic coloured tiles in vertical surface 300mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Colour, design and pattern shall be approved by GE. Make M/s Somany Pikington Limited (Haryana)/Orient/Johnson (India) Pvt Ltd as approved by GE.

M&L for granite (of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cill, cooking platforms over and including 15mm thick screed bed in cement mortar 1:4 complete and pointing in white ceemnt (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note : Colour, design and pattern shall be approved by GE (I).

Lalta Prasad vijay kumar Forwarding Agency

M/S UNIQUE ENTERPRISES

VIJAY CONSTRUCTION COMPANY