MIDDLE SCHOOL GAMGULLA GIRLS TOILET

Engagement of manual labour for clearance of site including disposal complete.

Earth work in Trench excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m 2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing/Laying Stone soling Nallah hand packed on level in foundation trenches excluding carriages of Stones.

S/S of Boulder/GSB filling under rooms floors incl. watering and ramming with hand rammer including carriage.

Filling of Available excavated earth ( Exclding rocks) in trenches, Plinths, sides of foundations etc. in layers not exceeding 20 cm in depth,Consolidation each layer by ramming and watering lead upto 50mtr and lift upto 1.5mtr

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

Reinforcement for RCC works incld. straightening bending cutting placing in position and binding all complete (TMT Bars)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc.

Centering and shuttering including strutting, propping etc. suspended floors, roofs, landings, balconies and access platforms.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 4 coarse sand).

Extra for brick work in superstructure above plinth level upto Floor V Level (by manual means).

Half brick masonry with common burnt clay (non-modular) bricks of class designation Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing/ fixing in position ISI marked door shutters confirming to IS 2202 non decorative type , core of block board construction with frame of hard wood and commercial 3 ply veeneering with vertical graings and cross bands and face veeners on both sides of shutters incl fitting of pressed mark butt hinges100mm, screws, handle 100mm , Sliding Bolt 200mm and tower bolt100mm complete job incl. Two coats of Synthetic enamel Paint of approved brand

Providing/ fixing in position Pre cast Cement concrete Jali 1:2:4: mix reinforced with 6 mm dia mild steel wire incl. cement mortat of mix 1:3 mix.

Providing wood work in doors and window frames and fixed in position made of imported Kail wood/ KD wood complete job

P/A 12 mm thick cement plaster 1:6(1cement:4 fine sand)

P/L cement concrete flooring (1:2:4) mix etc complete 25 mm thick with 20mm nominal size stone aggregate

P/A water based putty of average thickness 2mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying ceramic glazed floor tiles in sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Carraige of Fine & Coarse Aggregate from Source to Site. 30 Km

Carraige of Stone soling from Source to Site. 20 Km

Carraige of Bricks from Source to Site. 10 Km

Sanitary Fittings and Disposal System:

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc16mm OD

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc20mm OD

Providing and fixing of G.I Unions Nipples complete including cutting and making good the walls etc.16 mm OD

Providing and fixing of G.I Unions Nipples complete including cutting and making good the walls etc.20 mm OD

P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete. (Tank nipples 20mm dia)

Providing and fixing PPR ball valve of approved quality. 20 mm

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Tees's, Elbows etc.) jointing/testing complete (100mm)

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Tees's, Elbows etc.) jointing/testing complete (75mm)

P/F PVC fittings of standard quality type Floor Trap (100mm)

P/F PVC fittings of standard quality type Plain Bend (100mm)

P/F PVC fittings of standard quality type Collars (100mm)

P/F PVC fittings of standard quality type Reducer (100mm to 75mm)

P/F PVC fittings of standard quality type Plain Bend (75 mm)

P/F PVC fittings of standard quality type Collars (75mm)

P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc "B type" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest)

P/F PPR Bib Cock 15mm

P/F PPR Angle valve 15mm Nominal Bore

Providing and placing on terrace (at all floor levels) polythene water storage tank IS: 12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings, and the base support for tank ( Syntax), or equivalent having valid IS license complete

Add provision for cost of photographs & Citizen Information Board and unforseen items